Nine Guides to Choosing Setting Up and Maintaining Grinders
Written by the people who build the machines, for the people who run them. Wheel selection, setup sequences, maintenance schedules and process comparisons.
Every Guide We Have Published
Grouped by type: Buying Guide, Comparison Article, Installation Guide, Maintenance Guide, Process Guide, Product Guide.
How to Choose a Surface Grinder for a Tool Room
Five specifications decide the machine. Everything else is detail.
Read the GuideGrinding Wheel Selection Basics for Production Work
The machine sets the limits. The wheel decides what you get inside them.
Read the Guide
A Practical Maintenance Schedule for a Surface Grinder
Geometry is lost slowly, and always through something that was easy to check.
Read the Guide
Between Centres or Centerless Which Process Fits the Part
One process wins on flexibility. The other wins on volume. Very little overlap.
Read the Guide
Setting Up a Centerless Grinder for a New Part
Get the order right and the first part is close. Get it wrong and no amount of feeding fixes it.
Read the Guide
Punch Grinding Setup for Press Tool Rooms
The punch is small, the tolerance is tight and the wrong collet ruins both.
Read the Guide
A Practical Guide to Saw Blade Resharpening
Sharpening is geometry restoration, not polishing.
Read the Guide
Circular and Band Saw Sharpening Are Different Jobs
Same idea, different machine. A blade rack with both needs both.
Read the Guide
Sharpening Long Straight Knives Without Burning the Edge
Heat is the enemy. Everything in the setup is about keeping it out of the edge.
Read the GuideWhat These Guides Cover
- Buying Guide
- Comparison Article
- Installation Guide
- Maintenance Guide
- Process Guide
- Product Guide
If the answer you need is not here, ask us directly. Questions that come up more than once end up on this page.
About the Knowledge Centre
Who writes these guides?
Our own engineering and service team, using the same information we give customers on WhatsApp when they call with a problem.
Are the guides specific to WUK machines?
The principles apply to any grinder. Where a specific figure is quoted it comes from one of our machine data sheets and the model is named.
Can you answer a question that is not covered here?
Yes. Send it on WhatsApp or by email with a photograph of the part or the problem and we will answer it.
Do you publish machine data sheets separately?
Yes, as PDFs in the Download Centre, one per model plus a full range catalogue.
Ask Us the Question That Is Not Answered Here
Send a photograph of the part, the problem or the machine. Our engineers answer during working hours in China and by email outside them.