Repeat diameters, shift after shift, without a clamping cycle on every part.
Loading and unloading every part is the bottleneck long before the wheel is. Centerless grinding removes the cycle entirely.
Wheel wear moves the diameter gradually. Fine micro feed and a large wheel are what keep the drift slow and correctable.
Shafts and sleeves ground on separate machines stack two setup errors, which shows up as noise or wear in the assembly.
Automotive suppliers need throughput with size stability, correction resolution measured in microns, and machines their maintenance team can support with familiar CNC platforms.
Four models from our range that most often go into this industry, with the reason on each product page.
The larger centerless machine in the range, covering 0.5 to 60 mm diameter.
Built for small parts, where high volume and tight size control meet.
OD and ID grinding on one machine, for shafts, bushes, needle valves and plungers.
Servo vertical feed and hydraulic table traverse on a 300 x 600 mm table.
One set minimum order, 15 to 45 working days after deposit, EXW FOB CFR or CIF from Shenzhen. Machines are configured for your supply voltage and frequency and shipped with 12 months warranty.
Packing and Delivery Detail
Either. The FX-12S covers 0.5 to 40 mm in a compact frame, the FX-18S covers 0.5 to 60 mm with a larger wheel and longer dress intervals.
Upper slide micro feed on both centerless machines is graduated at 0.001 mm per scale division.
Yes, FANUC, SIEMENS, SYNTEC or GSK on the CNC configurations. Matching what your maintenance team already supports is usually the right call.
Send the part drawing before delivery and we prepare blade height, wheel specification and regulating wheel settings as a starting point.
Send a drawing or describe the part and the batch size. We come back with a model, a wheel specification and the tolerance we expect to hold.
