Wire Rope Thimbles
G411 US Type Light Duty Wire Thimble
A U-shaped or C-shaped wire rope thimble in US Type G411 light-duty design, made from galvanized steel, stainless steel, or mild steel to protect wire rope ends during termination. It maintains the rope's integrity by distributing load and preventing abrasion at the bend point. Sizes range from 1/8" to 2 1/2" with custom sizes available on request.
- Finish
- Galvanized (zinc-plated), Stainless Steel (passivated). Shape: U-shaped or C-shaped for a secure fit Applicati
- Standard
- US Type G411. Size Range: From 1/8" to 2 1/2" (custom sizes available on request)
- Catalogue Family
- Wire Rope Thimbles
- Certificates
- EN 10204 3.1 material test certificate on request
CAD files are supplied on request via WhatsApp or email rather than published for open download.
Key Benefits
What G411 US Type Light Duty Wire Thimble Gives You
- Protects wire rope from abrasion and fatigue at the termination point by maintaining a smooth, consistent bend radius
- Distributes load evenly across the rope strands to prevent localized stress and premature failure
- Galvanized and stainless steel versions resist corrosion in marine and outdoor environments
- Light-duty design suits non-repetitive or low-cycle lifting and securing tasks without over-engineering
- C-shaped or U-shaped configuration ensures a secure fit around the rope end and prevents slippage
- Standardized sizing matches wire rope diameter directly for correct fit and performance
- Reduces the risk of rope deformation and strand pull-out during installation and use
Application Scenarios
Where G411 US Type Light Duty Wire Thimble Is Used
- Terminating a 1" wire rope on a crane hook or anchor point where the rope bends sharply
- Securing a wire rope end on a trailer winch or truck tie-down system with light to moderate load cycles
- Marine applications such as mooring lines or deck rigging where exposure to saltwater is present
- Construction site rigging for temporary lifting or holding of lightweight components
- Industrial equipment where wire rope is used in non-repetitive, low-frequency operations
- Rigging setups with limited space where a compact, low-profile thimble is needed
Who It Is For
Buyers This Product Is Built For
- Marine equipment suppliers building mooring and anchoring systems for small vessels
- Truck and trailer manufacturers specifying wire rope terminations for tie-down systems
- Construction contractors installing temporary rigging for light lifting tasks
- Rigging distributors carrying light-duty wire rope accessories for general use
- Industrial maintenance teams replacing worn or damaged thimbles in non-critical systems
Problems It Solves
Problems This Product Removes
- Wire rope strands fraying or breaking at the termination point due to sharp bending
- Premature fatigue failure in wire rope caused by uneven load distribution at the bend
- Corrosion damage in outdoor or marine environments when using non-resistant materials
- Incorrect fit between thimble and rope diameter leading to slippage or deformation
- Need for a simple, low-cost solution for light-duty wire rope termination without over-specifying
- Buying separate thimbles and rope fittings from multiple suppliers for a single rigging task
Technical Features
Technical Features
- U-shaped or C-shaped body designed to fit around the end of a wire rope
- Made from galvanized steel, stainless steel, or mild steel for durability and environmental resistance
- US Type G411 standard compliance for consistent sizing and interchangeability
- Sized to match the actual diameter of the wire rope used
- Galvanized or passivated finish for corrosion protection
- Smooth internal surface to minimize rope abrasion
- Standardized dimensions across all sizes to ensure predictable fit and performance
Specifications
G411 US Type Light Duty Wire Thimble Specifications
Values published in the Kailipu catalogue for this item. Anything not listed is available on request.
| Standard | US Type G411 |
|---|---|
| Material Options | Galvanized steel, stainless steel, mild steel |
| Finish | Galvanized (zinc-plated), stainless steel (passivated) |
| Shape | U-shaped or C-shaped |
| Size Range | 1/8" to 2 1/2" (custom sizes available on request) |
| 1/8" Dimensions | A 49.28 B 33.27 C 27 D 17.5 E 6.35 F 4 mm weight 0.013 kg |
| 1/4" Dimensions | A 49.28 B 33.27 C 27 D 17.5 E 9.65 F 7 mm weight 0.013 kg |
| 1/2" Dimensions | A 69.85 B 47.75 C 44.45 D 28.7 E 17.53 F 13.5 mm weight 0.052 kg |
| 1" Dimensions | A 169.93 B 107.95 C 95.25 D 63.5 E 35.3 F 26.92 mm weight 0.4 kg |
| 2" Dimensions | A 289 B 270 C 188 D 114.3 E 69 F 53 mm weight 4.94 kg |
Full size table on request. The catalogue publishes a full dimension and capacity table for this item. Ask on WhatsApp or by email and we will send it as a PDF.
Materials
Materials And Finishes
- Galvanized steel for corrosion resistance in outdoor and marine environments
- Stainless steel for high resistance to rust and chemical exposure
- Mild steel for cost-effective use in dry, indoor applications
- Passivated finish on stainless steel to enhance surface integrity
- Zinc-plated surface to prevent oxidation and extend service life
Manufacturing Process
How This Product Is Made
1Cutting of steel stock to blank size for the thimble shape
2Forming the U or C shape through cold or hot forming
3Surface treatment including galvanizing or passivation
4Dimensional inspection against the G411 standard
5Final cleaning and packaging for shipment
6Custom sizing performed to drawing or specification upon request
Quality Control
Quality Control On Every Batch
- Dimensional tolerance check against published size table
- Visual inspection for surface defects, cracks, or coating flaws
- Material verification through test certificate on request
- Proof load test on production batches
- Breaking strength validation to confirm design integrity
- Third-party inspection accepted before shipment
Customisation
Customisation Options
- Custom sizes built to a supplied drawing or specification
- Private label and OEM marking available
- Finish options: galvanized, stainless steel, or passivated
- Packaging configured to customer carton or pallet requirements
- Material selection tailored to environmental or load conditions
Compare
How It Compares With The Alternatives
An honest read on where this pattern wins and where another one would serve you better.
| Alternative | Honest Trade Off |
|---|---|
| Heavy-duty thimble | The G411 is lighter and less expensive but not suitable for repeated high-load or dynamic applications |
| Soft thimble | Steel thimbles offer better resistance to deformation and wear under load compared to soft rubber or plastic alternatives |
| Unprotected rope end | A thimble prevents rope damage at the bend point, extending service life and reducing failure risk |
| Non-standard thimble | G411 ensures compatibility with US-specified wire rope fittings and avoids fit issues |
Use Guide
How To Use And Inspect G411 US Type Light Duty Wire Thimble
- Match the thimble size exactly to the actual diameter of the wire rope being used
- Ensure the thimble is fully seated and aligned with the rope end before termination
- Use only the specified material and finish for the intended environment (e.g., galvanized for marine)
- Inspect the thimble and rope end regularly for signs of wear, corrosion, or deformation
- Replace the thimble if the internal surface shows scoring or if the shape is distorted
- Do not reuse a thimble after the rope has been cut or re-terminated
Related Products
Often Ordered With This Item
Synthetic Rope Thimbles
Tube Thimble | Tube Wire Rope Thimble Without Gusset
Tubular Thimble With Gusset
Round Rope Thimbles, Manila Rope Thimble
Heavy Duty Thimble G414 US Type
Wire Rope Thimble European Type
Tubular Thimble With Gusset Alternate Listing
Tube Wire Rope Thimble | Tube wire rope thimble without gusset
Browse The Category
Industries Using This Product
Sourcing Support For This Product
Guides Worth Reading Before You Order
Answers
G411 US Type Light Duty Wire Thimble FAQ
What sizes are available for the G411 thimble?
Sizes range from 1/8" to 2 1/2". Custom sizes are available on request.
Can I use this thimble with a 1" wire rope?
Yes, a 1" thimble is available and sized to match the 1" wire rope diameter.
What materials are used in the G411 thimble?
Available in galvanized steel, stainless steel, and mild steel.
Is there a corrosion-resistant version?
Yes, galvanized steel and stainless steel versions are available for improved resistance to rust and outdoor exposure.
Can I get custom sizes or markings?
Yes, custom sizes can be built to drawing, and private label or OEM marking is available.
What finish options are there?
Galvanized (zinc-plated) or stainless steel with passivated finish.
How are the thimbles packed for export?
Standard carton and pallet packing; custom configurations available to suit warehouse or retail needs.
Need A Quote On G411 US Type Light Duty Wire Thimble
Send the sizes, the finish and the quantity on WhatsApp or by email. You get a priced reply within 24 hours and a straight answer on stock.
We reply within 24 hours on WhatsApp or by email. Send a drawing, a photo or a bill of materials and we will quote it as it stands.