Galvanized eye-and-eye turnbuckle with open threaded body shown diagonally on a plain white background

Turnbuckles

Eye Turnbuckle DIN 1480 Forged

A forged eye turnbuckle to DIN 1480 standard, made from carbon steel Q235, with eye ends on both ends for secure connection to pins or bolts. Designed for adjusting tension in wire ropes, cables, or chains in lifting, rigging, and structural stability applications. Available in sizes M6 to M48 with galvanized surface finish. Built for consistent performance and interchangeability across industrial and marine environments.

Size: M6-M48 Surface: Galvanized Process: Forged
Material: Carbon Steel Q235
Type: DIN 1480
Packing: Cartons or Gunny Bags and then on Pallets
Catalogue Family: Turnbuckles
Certificates: EN 10204 3.1 material test certificate on request

Upload Drawing via WhatsApp Download Turnbuckles PDF

CAD files are supplied on request via WhatsApp or email rather than published for open download.

Key Benefits

What Eye Turnbuckle DIN 1480 Forged Gives You

Adjusts tension precisely in wire ropes and cables without requiring disassembly
DIN 1480 compliance ensures interchangeability and consistent performance across systems
Forged carbon steel Q235 body provides high strength and impact resistance
Galvanized surface finish resists corrosion in outdoor and marine environments

Eye ends on both ends allow direct connection to pins, bolts, or other fittings
Threaded body with left-hand and right-hand threads enables controlled tightening or loosening
Compact design reduces bulk while maintaining full load capacity

Application Scenarios

Where Eye Turnbuckle DIN 1480 Forged Is Used

Adjusting tension in wire rope stays on offshore drilling platforms or marine mooring systems
Tightening guy wires on radio towers, transmission poles, and temporary structures
Balancing load distribution in crane rigging and lifting setups with wire rope systems

Tensioning fence lines and trellises in agricultural and landscaping projects
Stabilizing temporary scaffolding and structural supports during construction
Maintaining rigging tension on sailing vessels for shrouds and stays under dynamic loads

Who It Is For

Buyers This Product Is Built For

Marine and offshore rigging contractors needing certified turnbuckles for mooring and anchoring
Construction firms installing guy wires and temporary structural supports
Cranes and lifting equipment suppliers integrating tensioning components into rigging kits

Agricultural equipment builders using turnbuckles in vineyard trellising and fencing
Industrial maintenance teams managing wire rope systems in factories and ports
Rigging distributors sourcing standardized, interchangeable turnbuckles for inventory

Problems It Solves

Problems This Product Removes

Inconsistent tension in wire ropes due to lack of adjustable fittings in fixed-length systems
Difficulty in aligning and securing rigging components without a threaded adjustment point
Corrosion damage in outdoor or marine environments due to untreated steel fittings

Non-standard turnbuckles requiring custom fabrication or replacement parts
Need to replace multiple components when a single tensioning device fails
Lack of interchangeability between turnbuckles from different suppliers causing delays

Technical Features

DIN 1480 standard compliance for thread dimensions, strength, and interchangeability
Forged carbon steel Q235 body with heat treatment for enhanced durability
Eye ends on both ends for connection via pins or bolts
Left-hand and right-hand threads on the central body for tension adjustment

Galvanized surface finish for corrosion resistance in harsh environments
Available in sizes M6 to M48 with standardized thread pitch and dimensions
Working load limit and material grade stamped on the body for traceability

Specifications

Eye Turnbuckle DIN 1480 Forged Specifications

Values published in the Kailipu catalogue for this item. Anything not listed is available on request.

Standard	DIN 1480
Material	Carbon steel Q235
Process	Forged
Surface Finish	Galvanized
Size Range	M6 to M48
End Type	Eye to eye
Thread Type	Left-hand and right-hand threads on central body
Working Load Limit	Stamped on body

Materials

Materials And Finishes

Carbon steel Q235 used for the forged body, providing strength and ductility
Galvanized coating applied after forging to resist rust and environmental wear

Threaded body made from heat-treated steel to maintain integrity under tension
Eye ends formed during forging to avoid weak weld points or joints

Manufacturing Process

How This Product Is Made

1Forging of the body and eye ends from carbon steel Q235 billets

2Heat treatment to improve strength and toughness of the forged parts

3Machining of internal threads with left-hand and right-hand configurations

4Galvanizing of the complete assembly to provide corrosion protection

5Inspection of thread fit and eye alignment before packaging

6Stamping of working load limit and material grade on the body

7Packing in cartons or gunny bags, then palletized for export

Quality Control

Quality Control On Every Batch

Proof load testing on production batches to verify strength
Dimensional tolerance check against DIN 1480 specifications
Breaking strength validation to confirm design integrity

Visual inspection for surface defects, coating uniformity, and thread quality
Material Test Certificate to EN 10204 3.1 issued with the order
Third-party inspection accepted at the Qingdao warehouse before shipment

Customisation

Customisation Options

Custom tonnage stamping on the body for traceability
Private label and OEM marking available
Surface finish options including zinc plating, powder coating, or electrophoretic black

Custom sizes and thread configurations built to a drawing
Packing configuration tailored to carton count, pallet pattern, or retail needs

Compare

How It Compares With The Alternatives

An honest read on where this pattern wins and where another one would serve you better.

Alternative	Honest Trade Off
Welded turnbuckle	Forged construction offers higher strength and impact resistance than welded joints, which can fail under dynamic loads
Threaded rod end turnbuckle	Eye ends allow easier connection with pins or bolts compared to rod ends, which require additional fittings
Non-galvanized turnbuckle	Galvanization extends service life in outdoor and marine environments but adds cost and weight
Non-standard turnbuckle	DIN 1480 compliance ensures interchangeability and reduces the risk of fitment issues across systems

Use Guide

How To Use And Inspect Eye Turnbuckle DIN 1480 Forged

Match the stamped working load limit to the calculated load, not the equipment rating
Ensure both eye ends are aligned and connected to pins or bolts with proper locking
Turn the central body clockwise to tighten and counter-clockwise to loosen
Inspect the galvanized coating for damage before use; avoid over-tightening
Do not use if the threads are stripped or the eye shows deformation
Retire the turnbuckle if the marking is illegible or the body is bent