Turnbuckles
Turnbuckle Hardware Eye and Eye DIN 1480
An eye and eye turnbuckle compliant with DIN 1480, made from malleable, carbon, or stainless steel with galvanized surface finish. It features threaded ends on both sides of the body to adjust cable or wire tension by rotating the central body. Available in sizes M6 to M48, it connects via eye fittings that accept pins or bolts for secure rigging in tensioning systems.
- Size
- M6-M48 Surface: Galvanized Process: Forged / Casting
- Material
- Malleable / Carbon / Stainless Steel
- Type
- Eye / Hook / Jaw
- Packing
- Cartons or Gunny Bags and then on Pallets
- Catalogue Family
- Turnbuckles
- Certificates
- EN 10204 3.1 material test certificate on request
CAD files are supplied on request via WhatsApp or email rather than published for open download.
Key Benefits
What Turnbuckle Hardware Eye and Eye DIN 1480 Gives You
- Adjusts cable or wire tension precisely by rotating the central body without disconnecting the ends
- DIN 1480 standard compliance ensures dimensional consistency and interchangeability across rigging systems
- Eye ends allow direct connection to pins, bolts, or other fittings without additional hardware
- Galvanized surface resists corrosion in outdoor and marine environments
- Available in malleable, carbon, or stainless steel for different load and environment requirements
- Forged or cast construction provides reliable strength for static and dynamic tensioning
- Compact design reduces space needed in tight rigging setups
Application Scenarios
Where Turnbuckle Hardware Eye and Eye DIN 1480 Is Used
- Tensioning guy wires on communication towers and radio masts where precise adjustment is needed
- Adjusting tension in overhead power lines and electrical distribution cables
- Securing and aligning netting or mesh in industrial fencing and safety barriers
- Tightening cables in suspension bridges and temporary walkways during construction
- Stabilizing sailboat rigging where controlled tension is required on standing and running rigging
- Supporting and aligning railings and handrails on decks and platforms under dynamic load
Who It Is For
Buyers This Product Is Built For
- Telecommunications and power utility contractors installing and maintaining tower guy wires
- Marine and offshore rigging teams adjusting mooring and anchoring cable tension
- Construction firms setting up temporary structures and safety netting systems
- Industrial plant maintenance teams managing overhead cable tension in production areas
- Fencing and safety equipment suppliers specifying reliable tensioning hardware
- Rigging distributors stocking standard turnbuckles with traceable material and finish
Problems It Solves
Problems This Product Removes
- Inconsistent tension in cables due to lack of a central adjustment mechanism
- Need to disconnect and reconnect rigging to adjust length or tension
- Corrosion damage on uncoated steel turnbuckles in humid or coastal environments
- Mismatched end fittings requiring additional adapters or custom fabrication
- Inadequate strength or dimensional tolerance in low-grade turnbuckles
- Buying turnbuckles with different end types from multiple suppliers to cover one project
Technical Features
Technical Features
- DIN 1480 compliant body with left-hand and right-hand threaded ends
- Eye ends on both sides for connection via pin, bolt, or clevis
- Threaded body allows tension adjustment by rotating the central section
- Available in malleable, carbon, or stainless steel with galvanized finish
- Sizes range from M6 to M48 for use across light to heavy-duty applications
- Forged or cast construction depending on material and application
- Marked with working load limit and material type for traceability
Specifications
Turnbuckle Hardware Eye and Eye DIN 1480 Specifications
Values published in the Kailipu catalogue for this item. Anything not listed is available on request.
| Standard | DIN 1480 |
|---|---|
| End Type | Eye and Eye |
| Material | Malleable Steel / Carbon Steel / Stainless Steel |
| Surface Finish | Galvanized |
| Size Range | M6 to M48 |
| Construction | Forged or Cast |
| Working Load Limit | Stamped on body |
Materials
Materials And Finishes
- Malleable steel body cast from Masteel for ductility and impact resistance
- Carbon steel option for higher strength in static load applications
- Stainless steel version for saltwater and chemical exposure environments
- Galvanized coating applied after casting or forging to resist rust and corrosion
Manufacturing Process
How This Product Is Made
1Raw material casting or forging of the turnbuckle body and eye ends
2Machining of threaded ends and eye bore to DIN 1480 tolerances
3Galvanizing of the finished part to provide corrosion protection
4Inspection of thread engagement and eye alignment
5Stamping of working load limit and material type on the body
6Final packing in cartons or gunny bags on pallets
Quality Control
Quality Control On Every Batch
- Dimensional tolerance check against DIN 1480 specifications
- Thread integrity and engagement verification
- Visual inspection for casting defects or coating flaws
- Proof load testing on production batches
- Material Test Certificate to EN 10204 3.1 issued with orders on request
- Third-party inspection accepted at the Qingdao warehouse before shipment
Customisation
Customisation Options
- Custom tonnage stamping on the body for traceability
- Private label and OEM marking available
- Finish options including zinc plating, powder coating, or electrophoretic black
- Custom sizes and thread configurations built to a drawing
- Packing configuration adjusted for carton count, pallet pattern, or retail display
Compare
How It Compares With The Alternatives
An honest read on where this pattern wins and where another one would serve you better.
| Alternative | Honest Trade Off |
|---|---|
| Forged turnbuckle | Forged offers higher strength and impact resistance but costs more; malleable is suitable for static loads and lower cost applications |
| Hook and eye turnbuckle | Eye and eye provides more secure connection with pin or bolt; hook end is faster to attach but less secure under dynamic load |
| Threaded rod end turnbuckle | Threaded rod ends allow direct connection to nuts or fittings but lack the eye’s versatility for pin-based attachment |
| Screw pin shackle | Turnbuckle adjusts tension continuously; screw pin shackle is fixed once set and requires disassembly to change length |
Use Guide
How To Use And Inspect Turnbuckle Hardware Eye and Eye DIN 1480
- Match the stamped working load limit to the calculated load, not the cable rating
- Ensure both eye ends are aligned and the pin is fully inserted and secured
- Rotate the central body evenly to avoid binding or cross-threading
- Inspect the galvanized coating for damage before use in corrosive environments
- Avoid side loading the turnbuckle; keep the pull aligned with the axis of the body
- Retire the turnbuckle if the body shows deformation, threads are stripped, or the marking is unreadable
Related Products
Often Ordered With This Item
HD Turnbuckle Jaw Jaw, Heavy Duty Turnbuckles
Stainless Steel Turnbuckle H/E, H/H, E/E
Aluminum Body Turnbuckle Hook and Eye Alu Closed Body
Aluminum Turnbuckles Eye and Eye Alu Closed Body
Aluminum Turnbuckle Hook and Hook Alu Closed Body
Wire Rope Turnbuckle Commercial Type Malleable Steel
Turnbuckles hook and hook Commercial Type Malleable Steel
Galvanized Turnbuckle Eye/Eye Commercial Type Malleable Steel
Browse The Category
Industries Using This Product
Sourcing Support For This Product
Answers
Turnbuckle Hardware Eye and Eye DIN 1480 FAQ
What standard does this turnbuckle follow?
It complies with DIN 1480 for dimensions, thread pitch, and end fitting compatibility.
Can I get a Material Test Certificate?
Yes, a Material Test Certificate to EN 10204 3.1 is supplied with the order on request.
What sizes are available?
Sizes range from M6 to M48, with corresponding eye and thread dimensions per DIN 1480.
Is the finish galvanized?
Yes, the standard finish is galvanized for corrosion resistance. Custom finishes like powder coating or electrophoretic black are available.
Can I get custom tonnage marking?
Yes, custom tonnage stamping is available on the body for traceability and compliance.
How are they packed for export?
Packed in cartons or gunny bags on pallets. We can configure the carton count and pallet pattern to suit your warehouse or retail needs.
What materials are used?
Available in malleable steel, carbon steel, or stainless steel, depending on the application and environment.
Need A Quote On Turnbuckle Hardware Eye and Eye DIN 1480
Send the sizes, the finish and the quantity on WhatsApp or by email. You get a priced reply within 24 hours and a straight answer on stock.
We reply within 24 hours on WhatsApp or by email. Send a drawing, a photo or a bill of materials and we will quote it as it stands.