Hardware Chains
AUSTRALIAN STANDARD SHORT LINK CHAIN
Australian Standard short link chain made from low carbon steel, available in sizes from 3 to 10 with working load limits from 0.05 to 0.83 tonnes. Designed for industrial, marine and agricultural use, it is proof load tested. Suitable for tensioning, anchoring and securing loads where overhead lifting is not required. Available in self-color, zinc plated or hot dip galvanized finishes.
- Material
- Carbon steel Processing: Welded
- Finish
- Self-color finish or zinc plated finish Ultimate load is at least 2 times at working load limit
- Packing
- Drum + Steel pallets
- Catalogue Family
- Hardware Chains
- Certificates
- EN 10204 3.1 material test certificate on request
CAD files are supplied on request via WhatsApp or email rather than published for open download.
Key Benefits
What Australian Standard Short Link Chain Gives You
- Proof load tested for reliable performance under normal service conditions
- Low carbon steel construction provides consistent strength and ductility in repetitive tension applications
- Available in self-color, zinc plated or hot dip galvanized finishes to suit indoor, outdoor and corrosive environments
- Conforms to Australian Standard for link dimensions and mechanical properties, ensuring interchangeability
- Short link design allows tighter bends and compact routing in confined spaces
- Welded construction ensures uniform joint strength and resistance to fatigue in dynamic loading
- Clear working load limit marking on the chain for traceability and safe handling
Application Scenarios
Where Australian Standard Short Link Chain Is Used
- Securing cargo on flatbed trailers and container decks where vibration and movement are expected
- Tensioning and stabilizing equipment during transport in industrial and agricultural settings
- Marine mooring and anchoring applications where moderate corrosion resistance is required
- Industrial rigging for non-overhead tasks such as pulling, guiding or positioning loads
- Temporary structural bracing and support in construction and infrastructure projects
- Farm machinery and equipment tie-downs where chain strength and durability are needed
- Assembly line handling and material transfer systems requiring reliable looped tensioning
Who It Is For
Buyers This Product Is Built For
- Logistics and transport companies sourcing chain for freight securing and trailer tie-downs
- Marine contractors specifying chain for mooring and anchoring in non-critical applications
- Agricultural equipment manufacturers integrating chain into machinery tie-down systems
- Industrial plant maintenance teams needing durable chain for equipment restraints
- Rigging distributors carrying a range of short link chains for non-overhead use
- Manufacturers building equipment with built-in chain attachment points
Problems It Solves
Problems This Product Removes
- Lack of standardized chain dimensions in non-overhead industrial applications
- Chain failure due to insufficient proof testing or material inconsistency
- Corrosion damage in outdoor or humid environments without proper surface treatment
- Inadequate strength for repeated tensioning tasks when using low-grade or untested chain
- Difficulty finding a chain that fits tight routing spaces due to long link design
- Need for a chain that is not rated for overhead lifting but still meets mechanical standards
- Buying chain from multiple suppliers with no uniform marking or traceability
Technical Features
Technical Features
- Manufactured to Australian Standard with defined link dimensions and working load limits
- Made from low carbon steel with welded joints for consistent strength
- Proof load tested for safety margin
- Available in self-color, zinc plated or hot dip galvanized finishes
- Working load limit stamped on the chain for field traceability
- Link dimensions: D (link width), L (link length), B (link height) as per standard
- Length per 100kg in meters provided for estimating required chain length
- Not rated for overhead lifting; intended for tensioning, anchoring and securing
Specifications
Australian Standard Short Link Chain Specifications
Values published in the Kailipu catalogue for this item. Anything not listed is available on request.
| Chain Size | 3 to 10 |
|---|---|
| Working Load Limit | 0.05 to 0.83 tonnes |
| Material | Low carbon steel |
| Construction | Welded |
| Surface Finish | Self-color, zinc plated, or hot dip galvanized |
| Proof Load Test | the published multiple of the working load limit |
| Standards Conformity | Australian Standard |
| Application | Manufacturing, marine, agricultural |
| Not For | Overhead lifting |
| Length per 100kg | 555 to 50.2 meters |
Full size table on request. The catalogue publishes a full dimension and capacity table for this item. Ask on WhatsApp or by email and we will send it as a PDF.
Materials
Materials And Finishes
- Low carbon steel used for consistent weldability and mechanical performance
- Welded joints to ensure continuity of strength across the chain link
- Zinc plating for moderate corrosion resistance in outdoor or humid conditions
- Hot dip galvanizing for enhanced protection in marine and wet environments
- Self-color finish for indoor or dry service where corrosion is not a concern
Manufacturing Process
How This Product Is Made
1Raw material selection and inspection for carbon steel content
2Cutting of steel rod to required length for each link
3Welding of the link ends to form a closed loop
4Heat treatment to relieve welding stress and improve ductility
5Proof load testing on production batches to verify strength
6Surface finishing by zinc plating or hot dip galvanizing as ordered
7Stamping of working load limit and chain size on the chain body
8Inspection of dimensions and finish before packing
Quality Control
Quality Control On Every Batch
- Proof load testing on each production batch to confirm the published multiple of the working load limit
- Dimensional tolerance check against Australian Standard link dimensions
- Visual inspection for weld quality, surface defects, and finish uniformity
- Breaking strength validation to confirm minimum proof load requirement
- Material Test Certificate to EN 10204 3.1 supplied with orders
- Third-party inspection accepted at the Qingdao warehouse before shipment
Documentation
Certification And Documentation Supplied
- Material Test Certificate to EN 10204 3.1 supplied with orders
- Proof load testing documented per production batch
- Working load limit stamped on the chain body for traceability
Customisation
Customisation Options
- Custom surface finish in zinc plating, hot dip galvanizing or self-color
- Custom tonnage stamping on the chain body
- Private label and OEM marking available
- Packing configuration tailored to drum or pallet requirements
- Chain length supplied in custom lengths based on project needs
Compare
How It Compares With The Alternatives
An honest read on where this pattern wins and where another one would serve you better.
| Alternative | Honest Trade Off |
|---|---|
| EN 818-2 Grade 80 Short Link Chain | This chain has lower strength and is not rated for overhead lifting, while Grade 80 is designed for higher-duty applications and overhead use |
| Grade 80 Alloy Chain | Alloy chain has higher tensile strength and is suitable for overhead lifting; this carbon steel chain is for non-overhead use only |
| Galvanized Chain from Other Suppliers | This chain meets Australian Standard with verified proof testing; some alternatives may lack documented test records or standard dimensions |
| Rope or Webbing Tensioning | Chain provides higher abrasion resistance and durability in harsh environments, but is heavier and less flexible than synthetic alternatives |
Use Guide
How To Use And Inspect Australian Standard Short Link Chain
- Never exceed the stamped working load limit; use only for non-overhead applications
- Inspect the chain before each use for wear, deformation, or finish degradation
- Avoid sharp bends or kinks that can weaken the welded joint
- Use the correct surface finish for the environment—zinc plating for moderate exposure, galvanizing for wet or marine areas
- Do not reuse chain that has been subjected to overload or impact
- Store in a dry, covered area to prevent premature corrosion
- Replace chain if the working load limit marking is illegible or the link shows visible deformation
Related Products
Often Ordered With This Item
Trailer Safety Chains with S-Hooks
Custom Grade 30 Safety Chain Assembly: Long Link Galvanized Chain with Bracket (Production per Drawing/Sample)
Gradw 30 Proof Coil Chain NACM2010
GRADE 43 HIGH TEST CHAIN NACM2010
GRADE 30 PROOF COIL CHAIN ASTM80
GRADE43 HIGH TEST CHAIN ASTM80
DIN5685A/C SHORT LINK / LONG LINK CHAIN
TWIST LINK CHAIN-NACM2010 MACHINE CHAIN
Browse The Category
Industries Using This Product
Sourcing Support For This Product
Guides Worth Reading Before You Order
Answers
Australian Standard Short Link Chain FAQ
Is this chain suitable for overhead lifting?
No. This chain is not rated for overhead lifting and should only be used for tensioning, anchoring, or securing loads in non-overhead applications.
What is the proof load test requirement?
Each batch is proof load tested, as required by the Australian Standard for this chain type.
What finishes are available?
Available in self-color, zinc plated, or hot dip galvanized finishes. Choose based on the environment: self-color for dry indoor use, zinc for moderate exposure, galvanizing for marine or wet conditions.
Can you supply a Material Test Certificate?
Yes. A Material Test Certificate to EN 10204 3.1 is supplied with every order upon request.
Can you stamp custom tonnage or branding?
Yes. Custom tonnage stamping, private label marking, and OEM branding are available on request.
How is the chain packed for export?
Standard packing is in drums on steel pallets. We can adjust the drum size and pallet configuration to suit your warehouse or shipping needs.
What sizes are available?
Chain sizes range from 3 to 10, with working load limits from 0.05 to 0.83 tonnes. Dimensions and length per 100kg are provided in the technical table.
Need A Quote On Australian Standard Short Link Chain
Send the sizes, the finish and the quantity on WhatsApp or by email. You get a priced reply within 24 hours and a straight answer on stock.
We reply within 24 hours on WhatsApp or by email. Send a drawing, a photo or a bill of materials and we will quote it as it stands.