Wire Rope
Coated Wire Rope
The protective layer that extends the service life of steel wire rope in abrasive, corrosive or high-friction environments. Kailipu offers four coated wire rope types in 6X7+FC 7X7 6X19+FC and 7X19 constructions, with PVC PA or PE coating, so a buyer can source the full range of coated rope types on one order without chasing multiple suppliers.
All 4 Coated Wire Rope
Every catalogued line in Coated Wire Rope, nothing paginated
Who It Is For
Buyers Who Specify Coated Wire Rope
- Marine and offshore contractors needing coated wire rope for mooring or deck winch systems
- Mining and quarrying operations using wire rope in dusty or abrasive conditions
- Construction sites where wire rope runs through pulleys or around drums with high friction
- Industrial facilities with overhead cranes operating in humid or chemically exposed areas
- Logistics and port operators requiring durable rope for container handling with minimal maintenance
- Manufacturers of lifting equipment that integrate coated rope into their assemblies
Problems Solved
What Coated Wire Rope Solve on the Job
- A project needs a coated wire rope for a marine winch, but the supplier only stocks uncoated rope and cannot deliver a custom coating
- The wire rope is exposed to abrasive materials like sand or gravel, and the steel core wears through the strands within weeks
- The coating peels or cracks under repeated bending, exposing the steel core to moisture and accelerating corrosion
- No single supplier offers all three coating types PVC PA and PE in the same rope construction and diameter range
- The coating is applied unevenly or with poor adhesion, leading to early failure at the first bend
- The buyer must source the rope and the coating separately, increasing lead time and risk of mismatched specifications
Why Kailipu
Why Buy Coated Wire Rope from Kailipu
- Four coated wire rope types in 6X7+FC 7X7 6X19+FC and 7X19 constructions, all with PVC PA or PE coating
- Coating applied uniformly over the entire rope length with strong adhesion to prevent peeling
- Four coated constructions held as core lines: 6x7+FC, 7x7, 6x19+FC and 7x19
- Diameter, coated outside diameter and coating colour confirmed against your order rather than assumed
- Direct supply from the original manufacturer with no middleman layer, enabling mixed orders across product families
- Proof load testing dimensional checking and breaking strength validation performed on each batch
- Material Test Certificates to EN 10204 3.1 issued with the batch on request
- Custom tonnage stamping and private label marking available for branded or proprietary systems
- One-stop sourcing across eight rigging product families allows full rigging kits to be ordered together
Applications
Where Coated Wire Rope Are Used
- Using a 6X19+FC PVC-coated wire rope on a marine deck winch where saltwater exposure is constant
- Running a 7X7 PA-coated rope through a series of pulleys in a quarry conveyor system with abrasive dust
- Installing a 6X7+FC PE-coated rope in a port container crane where frequent contact with steel edges causes wear
- Deploying a 7X19 PVC-coated rope in a construction hoist where the rope bends frequently and must resist abrasion
- Integrating a coated wire rope into a custom-built lifting trolley where the coating prevents damage to the surrounding structure
Industries That Use This Category
Related Product Families
Answers
Coated Wire Rope FAQ
What are the differences between PVC PA and PE coatings?
PVC offers good general protection and is cost-effective. PA has higher abrasion and chemical resistance. PE provides better low-temperature flexibility and UV resistance. Choose based on the operating environment and expected wear.
Can the coating be applied to any wire rope construction?
Coating is available on 6X7+FC 7X7 6X19+FC and 7X19 constructions. These are the standard types in our current range. Other constructions may be possible with custom production.
Is the coating applied after the rope is made?
Yes. The coating is applied after the rope is formed, ensuring full coverage and adhesion. The process is controlled to prevent uneven thickness or air pockets.
Do you provide Material Test Certificates for coated wire rope?
Yes. A Material Test Certificate to EN 10204 3.1 is issued with the batch on request. It includes material composition and mechanical test results.
Can you custom stamp the working load limit and tonnage?
Yes. Custom tonnage stamping and private label marking are available. Send the marking layout and the required format for approval.
What is the lead time for coated wire rope?
For items in stock, lead time is about 15 to 20 days. For new production, it is about 25 days of manufacturing plus 7 days of packing, totaling about 35 days before shipment.
Which diameters can you supply?
Tell us the bare rope diameter you need and the finished coated outside diameter, and we will confirm what runs on current tooling. The catalogue lists the four constructions rather than a fixed diameter table, so the size is set per order.
Get a Quote on Coated Wire Rope
Send the sizes, capacities and finish you need. We reply within 24 hours with prices and the stock position line by line.
We reply within 24 hours on WhatsApp or by email. Send a drawing, a photo or a bill of materials and we will quote it as it stands.