Pulsed
Backpack Series
100W–300WPulsed
A wearable 12–18 kg host for work that never happens twice in the same place: bridge steelwork, tower sections, ship interiors, restoration scaffolding.
Pulsed & CW laser cleaning · 100W–6000W
Strip rust, paint and oxide without touching the part
KlearLaser builds the fibre laser cleaning machines that replace sandblasting and chemical stripping — no media, no solvents, no substrate damage. Send us your part and we will clean it before you buy.
Four build formats, one cleaning process
From a 12 kg backpack to a 6000W cabinet
Backpack, trolley, suitcase and cabinet builds share the same fibre source and control software — so you pick the format that matches where the work happens, not a compromise on cleaning performance.
Free sample test · no obligation
We clean your sample before you commit
Ship us a rusted bracket, a coated casting or a tired mould. We run it on the machine we would recommend and send back before/after photos, video and the exact parameters used.
- Free sample test
- Reply within 24 hours
- CE / FDA / ISO9001
- Raycus · JPT · IPG sources
- 1–2 year warranty on core parts
- Worldwide shipping
The process
Laser cleaning, in one paragraph
A fibre laser beam is absorbed by rust, paint, oxide and residue far more readily than by the clean metal beneath. Sweep it across the surface and the contaminant is lifted away while the substrate is left essentially untouched — no abrasive media, no solvent, no contact, and nothing to dispose of afterwards. KlearLaser has built nothing but this equipment since 2012.
Since 2012 we have built nothing else. That focus is why we can tell you which power level, which laser mode and which machine format your job needs — and why we will say so when the answer is "not this technology".
Why laser
Six things that change when you stop blasting
Compared with chemicals, sandblasting, grinding and high-pressure washing, the differences are not marginal.
No contact, no damage
Zero abrasion and no substrate erosion — the reason the process is accepted on moulds, thin sheet and artefacts.
Zero consumables
No chemicals, no blasting media, no waste stream to store or dispose of.
High precision
Selective cleaning that follows complex shapes and stops where you tell it to.
Eco-friendly
Significantly lower environmental impact than chemical or abrasive alternatives.
Faster and cost-effective
Up to 5–10× quicker than traditional methods with consistent, repeatable results.
Safer operation
Significantly reduced dust, fume and noise hazards compared with blasting and stripping.
Machines
Four build formats, chosen by where the work happens
Power sets how fast you clean. Format sets whether you can get to the part at all — which is usually the harder constraint.
Pulsed
Suitcase Series
100W–500WPulsed
A hard-shell case with wheels and a handle that survives a van, a lift and a customs inspection — then opens into a 500W pulsed cleaner.
Pulsed
Trolley / Pull-Rod Series
100W–500WPulsed
Pull-rod and wheels, 45 kg, 15–30 m²/h. The workhorse format for a maintenance bay that also gets called out to the yard.
Pulsed & Continuous Wave
Cabinet / Industrial Series
300W–6000WPulsed & Continuous Wave
Enclosed cabinet housing built for 24/7 duty, in pulsed 300W–1500W and continuous-wave 1000W–6000W variants, with water cooling and production-line integration.
Applications
Eight jobs our customers bought the machine for
Each one lists the traditional method it replaced and the power level we recommend.
Metal Rust Removal
Heavy rust comes off without abrasive media, without dust clouds and without losing steel.
Surface Paint & Coating Removal
Paint, powder coat and plating lift off selectively — the coating goes, the base material stays.
Mould & Die Cleaning
Residue, oil and oxidation come out of the cavity without taking the mould off the press.
Cultural Relics & Antique Restoration
Selective, reversible in approach and non-contact — the dirt leaves, the patina stays.
Wheel Hub & Automotive Refinishing
Brake dust, corrosion and old coating off an alloy rim in minutes, with nothing touching the surface.
Ship & Hull Maintenance
Hull rust and fouling removed with no blasting media, no containment tent and no runoff to capture.
Electronics & Precision Parts Cleaning
Oxide, flux and adhesive removed dry — no solvent bath, no ultrasonic stress on delicate parts.
Stone & Architectural Surface Cleaning
Graffiti and weathering come off stone without water, chemicals or loss of surface detail.
Why KlearLaser
A manufacturer, not a trading company
All manufacturing happens in our own Shenzhen facility — design, sourcing, assembly and testing. That is what keeps quality consistent unit to unit and pricing direct.
14+Years focused only on laser cleaning
100+Countries served
4Machine formats, 100W to 6000W
24hResponse commitment
- 14+ years of pure specialisationSince 2012 we have built laser cleaning equipment and nothing else — no marking, no welding, no cutting lines competing for engineering time.
- True factory-direct controlDesign, sourcing, assembly and testing all happen in our own Shenzhen facility, which is what keeps quality consistent and pricing direct.
- Premium laser sourcesMachines are built around genuine Raycus, JPT or IPG fibre sources for stable output and long service life.
- Built to your requirementFrom 100W handheld units to 6000W automated systems — configured for the application rather than sold from a shelf.
- Global service, 24-hour responseCustomers in over 100 countries, remote technical guidance, on-site support where needed and local partners.
- Internationally certifiedCE, FDA and ISO9001 certification for buyers in safety-conscious and regulated markets.
Case studies
What the machines did, and by how much
500W Trolley Series
Automotive Parts Rust Removal
Heavy rust on steel components was slowing production and driving rework.
1000W Pulsed Series
Aerospace Component Paint Stripping
Thick legacy paint and coatings had to come off aluminium parts without surface damage or toxic waste.
300W Trolley / Pull-Rod Series
Injection Mould Cleaning
Frequent downtime caused by residue, oil and oxidation building up on moulds.
100W Low-Power Pulsed Series
Museum Bronze Artefact Restoration
Oxidation and surface dirt had to be removed from ancient bronze artefacts without altering patina or damaging detail.
In their words
Customer feedback
★★★★★
“Used for cleaning ancient bronze surfaces – non-contact and no damage to the original artifact, with amazing results. The technical support team is very professional and provided detailed parameter guidance.”
★★★★★
“We used the 200W pulsed laser cleaning machine to treat hull rust, and the results are much cleaner than traditional sandblasting, with no dust pollution. Customer service responded quickly, and the customized solution was very professional.”
★★★★★
“KlearLaser's 3000W continuous wave laser cleaning machine has increased our production line paint removal efficiency by 4 times. No chemical agents needed, and it's much safer for operators. Highly recommended!”
Before you buy
The three questions that decide the purchase
Pulsed vs continuous wave: which laser cleaner should you buy?
It is the first decision and the one most buyers get wrong. Wattage is negotiable; laser mode is not.
How much power do you actually need?
Power follows the contaminant and the area, not the ambition.
Laser cleaning vs sandblasting: what really changes
The cleaning result is comparable. Everything around the cleaning is not.
Send us the part. We clean it and send the result back.
Free sample test, before/after photos and video, the exact parameters used, and an honest recommendation — including when laser cleaning is not the right answer.