Remote-control
Remote Control have Strong Durability, Wide Signal Coverage, Long Transmission Distance, Strong Anti-Interference Ability, Waterproof and Dustproof, High Safety Performance advantages.
- Operating Temperature Range
- 35℃ to +80℃
Quotation in 24 hours · CAD drawing in 48 hours · FEM / DIN / ISO design
Product Overview
<
p
>
Product Gallery
Technical Features
- Using ultra-fast charging technology, it can be charged for 15 minutes and can be used for 30 hours, and the life span is up to 5 years, which is 2 times longer than traditional batteries
- Adopt 2.4GHz international universal frequency
- Automatic frequency hopping technology is adopted to avoid interference, and up to 50 devices can be used at the same time within a range of 100m*100m without interference
- Low power consumption (the average service life can be up to 2 months when using two AA alkaline batteries)
- Operating functions can be set through the N-23 software (compatible with win98/ME/2000/XP)
- Operating distance up to 100 meters
- Both the transmitter and receiver are built-in antennas (the receiver can be equipped with additional accessories: passive antenna)
- Through the new flexible design, it can be assembled and set by itself (DIY)
- The Hamming code with multiple security protection design has several 32-bit non-repetitive identification codes
Where It Is Used
- Remote control can fully meet the various types of industrial traffic, cranes, overhead crane, gantry crane, construction machinery, road machinery and other heavy machinery applications.
Specifications
Values below are the published standard configuration. Anything outside this range is a customisation question, not a catalogue lookup.
| Operating Temperature Range | 35℃ to +80℃ |
|---|
Quality Control
Raw steel arrives with a Material Test Certificate and is spot inspected. Welders hold Class I international qualification. Girders are shot blasted to Sa2.5 before paint, and paint thickness is checked.
Customisation
Capacity, span, lifting height, duty group, power supply, control mode and service environment are all specified per order. Special products customisation is a standard service.
Documentation and Support
Equipment and main parts qualification certificates, electrical drawing diagram, installation operation and maintenance manual, and commissioning instructions ship with the equipment. Online support runs 24/7.
Use Guide
- Confirm the duty group. Count average lifts per hour and average load, not peak tonnage. This sets the FEM classification and drives the whole design.
- Check the building. Wheel load, headroom and hook approach decide whether the unit fits. Ask for the CAD drawing before ordering.
- Specify the environment. Temperature, dust, humidity and any hazardous area classification change the motor, brake and enclosure rating.
- Plan the power supply. Long travel needs a conductor rail or festoon system, which is quoted separately and must match the runway length.
- Book commissioning. Installation supervision or online commissioning support, plus operator training, before the unit goes into production.
Related Products
Conductor-rail
- Conductor Material
- Copper(5000A) /Aluminum(3000A).
- Max Allowable Amper
- 5000A/3000A
Mobile-conductive-busbar
- Conductor Material
- 99.99% Oxygen Free Copper.
- Max Allowable Amper
- 200A
Festoon-system
View specification
C-track-cable-trolley
View specificationFrequently Asked Questions
What information do you need to quote a remote-control?
Capacity, span rail centre to rail centre, lifting height, duty or working condition, power supply, travel distance and the service area conditions. A workshop drawing speeds it up considerably.
Is the remote-control available as a spare part or kit item?
Yes. Sinomac provides a special products customisation service, and free production drawings for regional partners and clients buying crane kits.
How long does a quotation take?
A quotation is issued within 24 hours and a CAD drawing within 48 hours, both free of charge.
What testing is done before shipment?
Every hoist is pre-commissioned before packing and the crane is pre-assembled for a factory acceptance test. A third party inspection can be arranged at your request.
Are your cranes built to FEM and DIN standards?
Yes. Sinomac designs to FEM, DIN and ISO. Duty group is set from your real lifting cycle, so the classification on the nameplate matches how the crane is actually used.
Can you supply a crane kit instead of a complete crane?
Yes. Sinomac supplies hoist, end carriages, drives, control system and anti-sway as a kit, and provides free production drawings of the girder for regional partners and clients buying kits, which lowers shipping cost.
Request a Quotation for the Remote-control
Send capacity, span, lifting height and duty. A quotation follows within 24 hours.