Monforts Stenter Machine Spare Parts
Chains, pin plates, clips, brush wheels, PEEK parts and guide rail wear parts for Monforts stenter frames, made in Shaoxing and shipped in 7 days.
All 28 Parts in This Category
Monforts is the machine brand we carry deepest. A Montex frame will run for decades, but the parts that touch the fabric and the rail, the pin plates, clips, chain bushes, brush wheels and guide strips, wear out on a production cycle measured in months. We make those parts and hold them as standard lines so a Monforts rail does not stand still waiting on an OEM order.
E+L KF 2020 Pneumatic Web Guider and Selvedge Holder
View Part
E+L ELSPREADER LPA 03 Pneumatic Selvedge Uncurler
View Part
Flat Nylon Selvedge Uncurler
View PartThree Finger Selvedge Uncurler for Monforts Stenters
View Part
PEEK Buffer Block for Monforts Stenters
View Part
Flat Nylon Selvedge Uncurler and Pinning Device Assembly
View Part
Flat Nylon Selvedge Uncurler Second Profile
View Part
Four Finger Selvedge Uncurler for Monforts Stenters
View Part
LK Pin Plate Holder for Stenter Chains
View Part
PEEK Roller for Selvedge Uncurlers Second Size
View Part
PEEK Roller for Selvedge Uncurlers
View Part
Monforts Brush Wheel 220 x 167 mm Second Reference
View Part
Monforts Brush Wheel Small 180 x 22 mm
View Part
Monforts Brush Wheel Big 220 x 167 mm
View Part
Carbon Graphite Strip for Monforts Stenter Guide Rails
View Part
PEEK Bush for Monforts Stenter Chain
View Part
Monforts Stenter Pin Plate Type 1
View Part
Monforts Stenter Pin Plate Type 2
View Part
Monforts Stenter Clip Type 3
View Part
Monforts Clip and Pin Double Use Clip
View Part
PEEK Nut for Monforts Stenters Black
View Part
PEEK Nut for Monforts Stenters Brown
View Part
Monforts Stenter Chain Complete With Chain Parts
View Part
Monforts Stenter Chain With PEEK Bush and Dust Cover
View Part
Monforts Stenter Chain Lightweight PEEK Build
View Part
Monforts Stenter Chain Lightweight Standard Bush
View Part
Monforts Stenter Clip Type 1
View Part
Cloth Cutting Blade 200 x 40 mm for Stenter Cutting Machines
View PartProblems This Category Solves
- Pin plates worn flat so the selvedge slips and the cloth leaves the machine narrow
- Chain stretched past the take-up adjustment, dropping fabric tension across the whole rail
- Guide strip worn through so the chain runs on the rail casting
- Width adjustment seized because the lead rod nut has broken
Who Buys These Parts
- Dyeing and finishing mills running Monforts Montex frames
- Maintenance teams planning a rail rebuild at a shutdown
- Machinery dealers and service companies holding Monforts spares
What You Get With This Category
Every wear part on the Monforts pin and clip rail from one supplier
Standard lines ship in 7 days rather than on an OEM lead time
PEEK bush, dust cover and slider options for oil-free guides
Parts matched from your sample when the pattern is not standard
Application Scenarios
- Polyester and polyamide heat setting
- Drying and width recovery after dyeing
- Chemical finishing ranges with coating add-ons
- Continuous lines running up to 100 m/min
Related Solutions
Guides About These Parts
How to Choose a Selvedge Uncurler
Flat nylon, three finger, four finger or pneumatic. Match the device to how hard your fabric actually curls, and fit it at the infeed before the pinning point.
Read GuideMonforts Stenter Machines and Their Wear Parts
TwinAir, ECO Booster, the Montex model range and the horizontal chain system. What makes a Monforts stenter, and which parts you will be reordering.
Read GuideMonforts Stenter Machine Spare Parts Questions
Which Monforts models do your parts fit?
We work from the part, not the model. Send a photo of the plate, clip or chain link with a ruler across the mounting and we confirm the match before you pay.
Do you supply the whole rail or only individual parts?
Both. Individual plates and clips for a section repair, or chain, plates, holders, clips and graphite strip quoted together for a full rail rebuild.
How long is delivery?
7 days for standard lines. Matched-to-sample parts are quoted with their own delivery date.
Can you convert another brand's rail to Monforts?
Yes. Artos rail changed to Monforts rail and LK rail changed to Monforts rail are both regular jobs for us.
Quote Monforts Stenter Machine Spare Parts
Send a photo of the part you are removing with a ruler across the mounting, or post us one sample. We confirm the match before you pay.