Three Finger Selvedge Uncurler for Monforts Stenters
A finger selvedge uncurler is an infeed accessory for Monforts stenters that keeps the fabric edges smooth and flat through stretching and drying. It stops rolled or curled selvedges, which otherwise cause uneven stretching, defects and handling problems, and it keeps the fabric width consistent and correctly aligned into the chain clips or pins. The fingers are adjustable and can be moved horizontally or vertically to suit different fabric types and widths. This is the three finger version, the lighter of the two, for edges that curl moderately.
Key Benefits
- Three adjustable fingers flatten the edge as it enters the stenter
- Fingers move horizontally and vertically for different fabric types and widths
- Keeps fabric width consistent and the edge aligned into the clips or pins
- Lighter touch than the four finger version for moderately curling goods
Application Scenarios
- Monforts infeeds where the edge curls moderately
- Mills running a mixed fabric range on one machine
- Replacing a worn finger uncurler at the annual service
Who It Is For
- Finishing mills processing delicate or lightweight fabric that curls at the edge
- Knitted fabric finishers whose goods roll as soon as they relax
- Maintenance teams replacing metal uncurlers that are marking the cloth
Problems It Solves
- A curled selvedge reaching the pins folded, so the edge is gripped double and tears.
- Metal uncurlers abrading or marking delicate fabric at the infeed.
- Uneven stretching and width loss because the edge was never opened flat.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Three adjustable fingers
- Fingers adjust horizontally and vertically
- Fitted at the stenter infeed
- For Monforts stenters with oil-free guide
- Made in Zhejiang, China, delivery within 7 days
Specifications
| Application | Monforts stenter (Oil-free guide) |
|---|---|
| Material | metal |
| Type | with grease and without grease |
| Colour | silver |
| Weight | 0.6kg |
| Brand | YH |
| Origin | Zhejiang, China |
| Delivery Time | Within 7 days |
Quality Control
- Profile checked against the reference part so the curve is consistent
- Surface finish inspected for burrs that would snag fabric
- Adjustment range checked through its full travel
- Parts packed in matched pairs for the two sides of the machine
Customisation Options
- Profile and mounting matched from your sample
- Height and angle range set for your fabric
- Supplied in matched pairs for both sides
How It Compares
| Compared With | What Changes |
|---|---|
| Four finger selvedge uncurler | The four finger version spreads the contact over a longer length and handles heavier curl. Three fingers are enough for moderate curl and disturb the fabric less. |
| Flat nylon uncurlers | A flat nylon guide is the gentlest option for delicate goods. Fingers give more positive edge control. |
Fitting and Replacing This Part
Step 1
Mount at the infeed section, just before the pinning or clipping point
Step 2
Set the height so the uncurler meets the edge as it opens, not after it has curled
Step 3
Adjust the angle for the fabric, softer settings for lighter goods
Step 4
Check both sides of the machine are set the same
Step 5
Inspect the working surface at each service and replace once it is grooved
Related Solutions
- Complete Stenter Rail Rebuild — Chain, pin plates, holders, clips, sliders and graphite strip quoted and shipped as one matched package.
- Multi-Brand Spare Parts Sourcing — Monforts, Bruckner, Artos, LK, IL SUNG, Stentex, Krantz, EHWHA, ALKAN, Unitech, ACC and Italian compact machines from one purchase order.
Industries Using This Part
Three Finger Selvedge Uncurler for Monforts Stenters Questions
Three fingers or four?
Three fingers for moderate curl and lighter fabric. Four fingers when the edge rolls hard and needs contact over a longer length.
Are the fingers adjustable?
Yes, horizontally and vertically, so the uncurler can be set for different fabric types and widths.
Where is it fitted?
At the stenter infeed, so the edge is flat and aligned before it reaches the chain clips or pins.
Does it work on knitted fabric?
Yes, knits are the fabrics that curl hardest. Tell us your fabric and we will recommend three or four fingers.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.