Monforts Stenter Pin Plate Type 2
The second Monforts plate pattern we carry. Same copper plate and steel pin construction as type 1, different plate length and hole spacing. Mills running more than one generation of Monforts machine usually need both patterns on the shelf, which is why we list them separately instead of as one part.
Key Benefits
- Second Monforts hole pattern held alongside type 1 so a mixed machine park is covered
- Copper plate with carbon steel or stainless steel pins
- Pins set in two rows at 3 to 4 pins per cm
- Standard line with 7 day delivery
Application Scenarios
- Older Monforts rails that do not take the type 1 plate
- Mills running two Monforts generations side by side
- Full rail replacement during shutdown
Who It Is For
- Textile finishing mills running Monforts pin stenters
- Maintenance teams rebuilding a pin rail after a chain overhaul
- Machinery dealers and service companies holding spare part stock for customers
- Maintenance planners keeping two plate patterns coded on the same parts list
Problems It Solves
- Ordering the wrong Monforts plate pattern and finding the holes do not line up on arrival.
- Worn or bent pins let the selvedge slip, so the fabric loses width and the edge frays.
- Plates bought in small lots from different batches give uneven pin height along the rail.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Application: Monforts stenter
- Material: plate:copper / pin: corban steel or stainless steel
- Colour: silver and yellow
- Brand: XTY
- Origin: Zhejiang, China
Specifications
| Application | Monforts stenter |
|---|---|
| Material | plate:copper / pin: corban steel or stainless steel |
| Colour | silver and yellow |
| Brand | XTY |
| Origin | Zhejiang, China |
Quality Control
- Dimensions gauged against the reference part on every production batch
- Fit checked on a rail or chain section before packing
- Material certificate held for the stock used
- Parts packed in matched sets from one batch so wear is even along the rail
Customisation Options
- Matched from your sample plate
- Carbon steel or stainless steel pins
- Matched sets by batch
How It Compares
| Compared With | What Changes |
|---|---|
| Monforts pin plate type 1 | Different plate length and hole spacing for a different Monforts rail generation. Measure before ordering. |
| Krantz pin plates | Krantz plates are 77 mm long on 57 mm centres with 3 mm screws, a different pattern again. |
Fitting and Replacing This Part
Step 1
Stop the machine and let the assembly cool before stripping it
Step 2
Note how the old part sits before removing it
Step 3
Clean the seat completely before fitting the new part
Step 4
Turn the rail by hand for one full pass and check free movement
Step 5
Replace in complete sets so grip and wear stay even across the machine
Related Solutions
- Custom Part Manufacturing From Samples — Pin plates, pin plate holders, clips, brush wheels and other metal parts made to customer requirement, from a sample or a drawing.
- Complete Stenter Rail Rebuild — Chain, pin plates, holders, clips, sliders and graphite strip quoted and shipped as one matched package.
Industries Using This Part
Guides That Mention This Part
How to Choose a Stenter Spare Parts Factory
What to ask a supplier before the first order, from material specification to how they pack a rail set, and which answers should make you walk away.
Read Guide
Stenter Pin Plate and Brush Wheel Size Reference
A working reference of the plate dimensions, hole centres and brush wheel sizes we hold, with the measurements to take before you order.
Read Guide
Why Fabric Leaves the Stenter Narrower Than It Should
Width loss is almost always a grip problem, not a setting problem. Work through the rail in order: brush, pins or clips, holders, chain, guide.
Read GuideMonforts Stenter Pin Plate Type 2 Questions
How do I tell type 1 from type 2?
Measure the hole to hole distance and the overall plate length. Send us both and a photo, and we will confirm which pattern you are running.
Can you supply both patterns in one shipment?
Yes. Mills with a mixed Monforts park usually order both in one consignment to save freight.
What is the plate made of?
Copper plate body with carbon steel or stainless steel pins, the same build as the rest of our pin plate range.
Is there a minimum order?
No fixed minimum. We ship single plates for a fit trial and full sets for production.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.