Monforts Stenter Chain Lightweight Standard Bush
Monforts chain built from lighter and stronger materials so it runs more smoothly along the track, with a standard bush rather than the PEEK version. Reference weight 0.6 kg, silver finish. Assembly of connectors, U-shaped connectors, pins, bush, screws and wear sleeves, with every part available on its own.
Key Benefits
- Lighter and stronger build so the chain moves more smoothly on the track
- 0.6 kg reference weight, the lightest chain in our Monforts range
- High quality bearings for long service life
- All small parts available separately for section repairs
Application Scenarios
- Monforts rails being rebuilt where PEEK is not required
- Mills balancing chain cost against running weight
- Second machines kept on a simpler build
Who It Is For
- Dyeing and finishing mills running Monforts stenters
- Maintenance teams planning a chain overhaul during a shutdown
- Textile machinery service companies rebuilding rails on customer sites
Problems It Solves
- A stretched chain drops fabric tension, so the cloth leaves the machine narrow even with good pins.
- Bushes that seize on the pin make the chain snatch on the guide and wear the rail.
- Waiting on an OEM chain order keeps the whole finishing line out of production.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Application: Monforts stenter (Oil-free guide)
- Material: metal
- Type: with grease and without grease
- Colour: silver
- Weight: 0.6kg
- Brand: YH
Specifications
| Application | Monforts stenter (Oil-free guide) |
|---|---|
| Material | metal |
| Type | with grease and without grease |
| Colour | silver |
| Weight | 0.6kg |
| Brand | YH |
| Origin | Zhejiang, China |
| Delivery Time | Within 7 days |
Quality Control
- Dimensions gauged against the reference part on every production batch
- Fit checked on a rail or chain section before packing
- Material certificate held for the stock used
- Parts packed in matched sets from one batch so wear is even along the rail
Customisation Options
- Chain matched from your sample link
- Cut to rail length with joining links
- Small parts supplied separately
How It Compares
| Compared With | What Changes |
|---|---|
| Chain with PEEK bush and dust cover | The PEEK version adds a dust cover that keeps lint out of the bush. Worth it in a dusty mill; this simpler build suits cleaner running conditions. |
| Complete chain with all chain parts | Same family. This one is the lighter build at 0.6 kg. |
Fitting and Replacing This Part
Step 1
Stop the machine and let the assembly cool before stripping it
Step 2
Note how the old part sits before removing it
Step 3
Clean the seat completely before fitting the new part
Step 4
Turn the rail by hand for one full pass and check free movement
Step 5
Replace in complete sets so grip and wear stay even across the machine
Related Solutions
- Chain Customisation for New Fabric Types — Change the chain and the machine can work for other types of fabric, without buying another stenter.
- Complete Stenter Rail Rebuild — Chain, pin plates, holders, clips, sliders and graphite strip quoted and shipped as one matched package.
Industries Using This Part
Guides That Mention This Part
Oil-Free or Lubricated Stenter Guides
An oil-free guide keeps lubricant away from the fabric using graphite strips and PEEK sliders. A lubricated guide uses a grease film. The chain is different for each, and mixing them is a costly mistake.
Read Guide
Why Fabric Leaves the Stenter Narrower Than It Should
Width loss is almost always a grip problem, not a setting problem. Work through the rail in order: brush, pins or clips, holders, chain, guide.
Read Guide
Stenter Chain Maintenance and Lubrication
Clean the guide and chain at least once a year, use a high temperature grease, and measure pitch over ten links before you decide to replace anything.
Read GuideMonforts Stenter Chain Lightweight Standard Bush Questions
Which Monforts chain should I choose?
If your mill runs dusty or with heavy chemical finishes, take the PEEK bush and dust cover version. In cleaner conditions this lighter standard build is enough.
What maintenance does the chain need?
Clean the guide and the chain at least once a year and add high-temperature grease, DuPont, Miller or Kluber grade.
Do you supply joining links?
Yes, counted against your rail length with every chain order.
How is the chain packed?
By rail side, so the two sides do not get mixed up on site.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.