Carbon Graphite Strip for Monforts Stenter Guide Rails
Carbon graphite strip for Monforts stenter guide rails. The strip is the sacrificial wear surface between the chain and the rail. Graphite is self-lubricating in its own right, so the strip carries the chain without an oil film, which is exactly what an oil-free guide needs and what keeps lubricant away from the fabric.
Key Benefits
- Self-lubricating, so the rail runs without an oil film near the cloth
- Sacrificial wear surface that protects the rail casting underneath
- Cheaper and faster to replace than machining a worn rail
- Supplied in strip lengths cut to your rail sections
Application Scenarios
- Monforts oil-free guides where the strip has worn through
- Rail rebuilds during a planned shutdown
- Machines where chain drag has started to rise
Who It Is For
- Finishing mills running Monforts stenters with oil-free guides
- Maintenance teams rebuilding guide rails
- Service companies doing rail work on customer sites
Problems It Solves
- A worn-through strip letting the chain run on the rail casting and destroying it.
- Rising chain drag and drive load as the wear surface goes.
- Oil migrating from a lubricated rail onto the fabric.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Carbon graphite wear strip
- Self-lubricating running surface
- For Monforts stenter guide rails
- Supplied cut to rail section length
- Made in Zhejiang, China, delivery within 7 days
Specifications
| Application | Monforts stenter |
|---|---|
| Material | peek |
| Type | black,white,yellow |
| Colour | black,white,brown |
| Brand | YH |
| Origin | Zhejiang, China |
| Delivery Time | Within 7 days |
Quality Control
- Strip thickness gauged along the full length
- Fit checked in a rail section before packing
- Strips packed by rail side
- Edges inspected for chips that would start a crack
Customisation Options
- Strip cut to your rail section lengths
- Matched from a sample of your existing strip
- Supplied with the chain and sliders as one rail package
How It Compares
| Compared With | What Changes |
|---|---|
| PEEK sliders on the chain | The graphite strip is the wear surface on the rail side, the slider is the wear surface on the chain side. A well set up oil-free guide usually has both. |
| Running a lubricated rail | Grease works but it has to be kept away from the fabric. A graphite strip lets the guide run dry. |
Fitting and Replacing This Part
Step 1
Stop the machine and let the rail cool
Step 2
Lift out the worn strip and clean the rail channel completely
Step 3
Bed the new strip down over its full length with no high spots
Step 4
Turn the chain by hand for a full pass and check for tight spots
Step 5
Replace both rails together so chain drag is even
Related Solutions
- Complete Stenter Rail Rebuild — Chain, pin plates, holders, clips, sliders and graphite strip quoted and shipped as one matched package.
- Multi-Brand Spare Parts Sourcing — Monforts, Bruckner, Artos, LK, IL SUNG, Stentex, Krantz, EHWHA, ALKAN, Unitech, ACC and Italian compact machines from one purchase order.
Industries Using This Part
Guides That Mention This Part
Oil-Free or Lubricated Stenter Guides
An oil-free guide keeps lubricant away from the fabric using graphite strips and PEEK sliders. A lubricated guide uses a grease film. The chain is different for each, and mixing them is a costly mistake.
Read Guide
Monforts Stenter Machines and Their Wear Parts
TwinAir, ECO Booster, the Montex model range and the horizontal chain system. What makes a Monforts stenter, and which parts you will be reordering.
Read Guide
Why Fabric Leaves the Stenter Narrower Than It Should
Width loss is almost always a grip problem, not a setting problem. Work through the rail in order: brush, pins or clips, holders, chain, guide.
Read GuideCarbon Graphite Strip for Monforts Stenter Guide Rails Questions
Why graphite rather than metal?
Graphite is self-lubricating, so the chain runs without an oil film. That is what an oil-free guide is for, and it keeps lubricant away from the cloth.
How long does a strip last?
It depends on line speed, fabric weight and how clean the rail is kept. Inspect it at the annual service along with the chain.
Can you cut it to my rail length?
Yes. Send us the section lengths and we will cut to size.
Do you supply the chain to match?
Yes, Monforts chain in several builds including PEEK bush and dust cover versions.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.