Four Finger Selvedge Uncurler for Monforts Stenters
A finger selvedge uncurler is an infeed accessory for Monforts stenters that keeps the fabric edges smooth and flat through stretching and drying. It stops rolled or curled selvedges, which otherwise cause uneven stretching, defects and handling problems, and it keeps the fabric width consistent and correctly aligned into the chain clips or pins. The fingers are adjustable and can be moved horizontally or vertically to suit different fabric types and widths. This is the four finger version. The extra finger spreads contact over a longer length of edge, which is what heavily curling knits need.
Key Benefits
- Four adjustable fingers give positive control over a hard-rolling edge
- Fingers move horizontally and vertically for different fabric types and widths
- Prevents the uneven stretching and defects a rolled selvedge causes
- Keeps the edge aligned into the chain clips or pins
Application Scenarios
- Knitted goods that roll hard as soon as they relax
- Wide machines where the edge has a long run into the pins
- Mills upgrading from a three finger uncurler
Who It Is For
- Finishing mills processing delicate or lightweight fabric that curls at the edge
- Knitted fabric finishers whose goods roll as soon as they relax
- Maintenance teams replacing metal uncurlers that are marking the cloth
Problems It Solves
- A curled selvedge reaching the pins folded, so the edge is gripped double and tears.
- Metal uncurlers abrading or marking delicate fabric at the infeed.
- Uneven stretching and width loss because the edge was never opened flat.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Four adjustable fingers
- Fingers adjust horizontally and vertically
- Fitted at the stenter infeed
- For Monforts stenters with oil-free guide
- Made in Zhejiang, China, delivery within 7 days
Specifications
| Application | Monforts stenter (Oil-free guide) |
|---|---|
| Material | metal |
| Type | with grease and without grease |
| Colour | silver |
| Weight | 0.6kg |
| Brand | YH |
| Origin | Zhejiang, China |
| Delivery Time | Within 7 days |
Quality Control
- Profile checked against the reference part so the curve is consistent
- Surface finish inspected for burrs that would snag fabric
- Adjustment range checked through its full travel
- Parts packed in matched pairs for the two sides of the machine
Customisation Options
- Profile and mounting matched from your sample
- Height and angle range set for your fabric
- Supplied in matched pairs for both sides
How It Compares
| Compared With | What Changes |
|---|---|
| Three finger selvedge uncurler | Three fingers suit moderate curl. The fourth finger spreads contact over a longer length for edges that roll hard. |
| E+L ELSPREADER pneumatic uncurler | The powered spreader is the gentlest option for elastic knits and spandex blends, at a much higher price. Finger uncurlers are the mechanical workhorse. |
Fitting and Replacing This Part
Step 1
Mount at the infeed section, just before the pinning or clipping point
Step 2
Set the height so the uncurler meets the edge as it opens, not after it has curled
Step 3
Adjust the angle for the fabric, softer settings for lighter goods
Step 4
Check both sides of the machine are set the same
Step 5
Inspect the working surface at each service and replace once it is grooved
Related Solutions
- Complete Stenter Rail Rebuild — Chain, pin plates, holders, clips, sliders and graphite strip quoted and shipped as one matched package.
- Multi-Brand Spare Parts Sourcing — Monforts, Bruckner, Artos, LK, IL SUNG, Stentex, Krantz, EHWHA, ALKAN, Unitech, ACC and Italian compact machines from one purchase order.
Industries Using This Part
Four Finger Selvedge Uncurler for Monforts Stenters Questions
When do I need four fingers rather than three?
When the edge rolls hard, typically on knitted goods. Four fingers spread the flattening over a longer length of edge.
Can the fingers be repositioned?
Yes, horizontally and vertically, to suit different fabric types and widths.
Will it damage delicate fabric?
It is a mechanical device. For very delicate elastic knits consider a pneumatic spreader or a flat nylon guide instead.
Does it fit machines other than Monforts?
It is made for Monforts stenters. Send us your machine details and a photo of the infeed and we will check.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.