Cloth Cutting Blade 200 x 40 mm for Stenter Cutting Machines
Steel cloth cutting blade for the cutting unit on a Monforts stenter, 200 x 40 mm in two thicknesses, 2.3 mm and 2.5 mm. The blade trims the fabric edge, usually the pinned selvedge, as the cloth leaves the machine. A dull blade tears rather than cuts, which shows up as a ragged edge on the finished roll.
Key Benefits
- Two thicknesses, 2.3 mm and 2.5 mm, so the blade matches the cutting unit
- Steel blade that holds an edge through a production run
- Cuts the trimmed edge cleanly instead of tearing it
- 0.44 kg reference weight, delivery within 7 days
Application Scenarios
- Trimming the pinned selvedge as cloth leaves a stenter
- Monforts stenter cutting machines
- Mills seeing ragged trimmed edges on finished rolls
Who It Is For
- Finishing mills trimming selvedge on the stenter exit
- Maintenance teams servicing the cutting unit
- Machinery dealers stocking consumable blades
Problems It Solves
- A dull blade tearing the fabric edge instead of cutting it, leaving a ragged finished roll.
- Wrong blade thickness sitting loose in the holder and chattering through the cut.
- Blade changes taking the whole line out of production because no spare was on the shelf.
Technical Features and Specifications
Every figure below comes from the part itself. Where a dimension is not listed, it is because we match it against your sample rather than publish a number we cannot stand behind.
Technical Features
- Size 200 x 40 mm
- Thickness options 2.3 mm and 2.5 mm
- Material: steel
- Silver finish
- Reference weight 0.44 kg
- For Monforts stenter cutting machines
- Made in Zhejiang, China, delivery within 7 days
Specifications
| Application | Monforts stenter cutting machine |
|---|---|
| Material | steel |
| Type | 200*40*2.3 / 200*40*2.5 |
| Colour | silver |
| Weight | 0.44kg |
| Brand | YH |
| Origin | Zhejiang, China |
| Delivery Time | Within 7 days |
Quality Control
- Thickness gauged on every batch so the blade seats correctly in the holder
- Cutting edge inspected for nicks before packing
- Blades packed edge-protected so they arrive sharp
Customisation Options
- Both thicknesses supplied from stock
- Other sizes made against a sample blade
- Bulk packs for mills that change blades often
How It Compares
| Compared With | What Changes |
|---|---|
| The 2.3 mm blade | Same 200 x 40 mm size, thinner body. Measure the blade you are replacing, a loose blade chatters and cuts badly. |
| Regrinding the old blade | Possible once or twice, but the blade loses width and stops meeting the counter surface correctly. |
Fitting and Replacing This Part
Step 1
Isolate the machine before opening the cutting unit
Step 2
Note the blade orientation before removing the old blade
Step 3
Check the blade thickness matches the holder, 2.3 mm or 2.5 mm
Step 4
Fit the new blade and check it runs true against the counter surface
Step 5
Keep at least one spare blade on the shelf so a change does not stop the line
Related Solutions
- Custom Part Manufacturing From Samples — Pin plates, pin plate holders, clips, brush wheels and other metal parts made to customer requirement, from a sample or a drawing.
Industries Using This Part
Cloth Cutting Blade 200 x 40 mm for Stenter Cutting Machines Questions
What size is the blade?
200 x 40 mm, in 2.3 mm or 2.5 mm thickness. Measure the blade you are replacing to be sure which one you need.
Which thickness do I need?
Whichever your cutting unit holder takes. A blade that is too thin will chatter in the holder.
How often should I change the blade?
When the cut edge starts to look ragged rather than clean. Keep a spare on the shelf so the change does not stop the line.
Do you make other blade sizes?
Yes, against a sample blade. Post us one.
Get a Price on This Part
Tell us the machine brand, the quantity and your rail length. If you are not sure the part matches, send a photo with a ruler across the mounting and we will confirm before you pay.