10 products
Fire Hose
Firefighting and high temperature hose from DN16 wildland lines to 12 inch TPU supply hose.
Explore the range
Layflat Hose Manufacturer
Layflat Hose Built in Our Own Weaving and Extrusion Lines
TPU, NBR and PVC layflat hose, suction hose and couplings from a Taizhou factory that has made hose since 2010 and exported to over 50 countries
Layflat Hose Manufacturer
From 1/2 Inch to 30 Inch in One Supply Chain
Fire hose, discharge hose, suction hose and the couplings to connect them, made and pressure tested in the same plant
Layflat Hose Manufacturer
Extrusion Through the Weave for Hose That Does Not Delaminate
TPU is extruded through the woven polyester so cover, lining and reinforcement behave as one wall under pressure
Layflat Hose Manufacturer
Every Hose Tested at 1.5 Times Working Pressure Before It Ships
Two hours on test, then a trace number that links the hose back to its production date, operators and raw material source
What We Make
Layflat hose and the couplings that go with it: TPU, NBR and PVC layflat hose, PVC suction hose, fire hose and cast or forged aluminium and steel couplings, in sizes from 1/2 inch to 30 inch.
Who We Serve
Firefighting and emergency services, agriculture, construction, oil and gas, water wells and mining, in more than 50 countries.
What We Solve
Moving large volumes of water, slurry, fuel and compressed air to places where laying rigid pipe costs more in time and haulage than the job is worth, and doing it with hose that survives being dragged, reeled and recharged every day.
Why Buy From Us
We run our own weaving, extrusion and coupling production, so lead time, colour, printing and coupling type are all decided in one plant rather than across three suppliers.
What We Make
Six Hose Families Built Around What the Fluid and the Site Demand
Wall material, reinforcement and length are chosen from the duty, not from what is on the shelf. Each family below solves a different combination of pressure, temperature, abrasion and chemistry.
7 products
Hose Coupling
Cast and forged couplings in aluminium, steel and stainless from 1 inch to 16 inch, made in the same plant as the hose.
Explore the range
7 products
NBR Layflat Hose
Nitrile rubber covered layflat hose for fire service, compressed air and agricultural duty that has to survive outdoors.
Explore the range
6 products
PVC Layflat Hose
Cost-effective PVC layflat discharge hose from 1 inch to 20 inch for agriculture, construction and civil engineering.
Explore the range
7 products
Suction Hose
Rigid PVC helix suction hose from 3/4 inch to 16 inch for pump inlets that must not collapse.
Explore the range
11 products
TPU Layflat Hose
High pressure TPU layflat hose in 200 m lengths for long distance water, frac and bore transfer.
Explore the rangeProduct Range
Sixteen of the 48 Products We Manufacture
Every product is made in our own plant and pressure tested before packing. The full range, grouped by category, is on the products page.
NBR Layflat Hose
Duraline Fire Hose
The Duraline fire hose is a rubber covered fire hose for municipal and industrial fire services, manufactured in compliance with BS 6391:2009 Type 3.
View specifications
TPU Layflat Hose
12 Inch Layflat Hose
The 12 inch layflat hose is a DN300 TPU hose used for high volume water transfer in agriculture, firefighting, oil and gas and general industry.
View specifications
Suction Hose
Fire Suction Hose
Fire suction hose, also called hard suction hose, is the short rigid-helix PVC line an appliance uses to draft from a lake, river, tank or hydrant.
View specifications
Fire Hose
Snow Making Hose
Snow making hose is a double jacket canvas hose that delivers water to snow cannon through a winter season.
View specifications
TPU Layflat Hose
Boreline Hose
Boreline hose is a high pressure, high tensile strength layflat hose for underground water pumping.
View specifications
Hose Coupling
Camlock Coupling
The camlock coupling connects and disconnects hose and pipe with two cam arms, no tools and no threading.
View specifications
NBR Layflat Hose
Layflat Air Hose
The layflat air hose is a nitrile rubber compressed air hose whose flat profile is the whole point: it stores and installs where a round hose will not go, which makes it practical in confined spaces and on crowded job sites.
View specifications
TPU Layflat Hose
Drag Hose
Drag hose is a TPU layflat hose used to transfer sludge, slurry and liquid manure continuously across an irrigation field, while being dragged behind the applicator.
View specifications
TPU Layflat Hose
Fracking Hose
Fracking hose is a high pressure TPU layflat hose for transferring large volumes of frac water and produced water in oil and gas.
View specifications
NBR Layflat Hose
Rubber Covered Fire Hose
Rubber covered fire hose is a maintenance-free covered fire hose used by municipal and industrial fire services.
View specifications
Suction Hose
Clear Suction Hose
Clear suction hose is a transparent PVC hose with a rigid PVC helix, used where the operator needs to see what is moving through the line.
View specifications
PVC Layflat Hose
PVC Layflat Hose
PVC layflat hose is the full PVC range, made from 1 inch to 20 inch for water discharge and supply in agriculture, construction and civil engineering.
View specifications
Fire Hose
Forestry Fire Hose
Forestry fire hose, also called wildland fire hose, is the lightweight fabric-covered TPU-lined hose crews carry over rough or steep ground to fight fires in grass, brush and trees.
View specifications
TPU Layflat Hose
Layflat Drinking Water Hose
The layflat drinking water hose is a food grade TPU pipeline for emergency and temporary potable water delivery at high working pressure.
View specifications
Hose Coupling
Storz Coupling
The Storz coupling is the symmetrical quick connect the fire service uses to join hose and equipment fast and securely.
View specifications
PVC Layflat Hose
16 Inch Discharge Hose
The 16 inch discharge hose is a DN400 PVC layflat hose for moving very large volumes of water in agriculture, construction, civil engineering and emergency work.
View specificationsWho We Serve
Six Industries That Move Fluid Where Pipe Cannot Go
Firefighting and emergency services, agriculture, construction, oil and gas, water wells and mining, in more than 50 countries.
Firefighting and Emergency
Jason has supplied fire services since the company started in 2008, when it began as a trade company focused on fire hose sales.
See the range
Agriculture
Irrigation, liquid fertiliser and slurry all move through layflat hose, and all three punish it differently.
See the range
Construction and Civil Engineering
Construction water is temporary by definition, which is why layflat hose beats pipe on most sites: it rolls up, moves with the job and gets recovered at the end.
See the range
Oil and Gas
Water transfer between pads is a logistics problem before it is a pumping problem.
See the range
Mining and Quarrying
Water underground stops production, and the hose that removes it has to survive being dragged across rock in places that are slow and expensive to reach for repair.
See the rangeWhat Problem We Solve
The Cost Is Rarely the Hose It Is the Time Around the Hose
Moving large volumes of water, slurry, fuel and compressed air to places where laying rigid pipe costs more in time and haulage than the job is worth, and doing it with hose that survives being dragged, reeled and recharged every day.
- Rigid pipe haulage and assembly on lines that will be pulled up in weeks
- Every extra coupling on a long run is a leak point and a pressure loss
- Hose collapsing on the pump inlet because a layflat wall was fitted to it
- Cover abrasion where hose crosses vehicle routes and rock
- 200 m TPU lengths against 20 m to 50 m in PVC, so joints drop by four fifths
- Rigid helix suction hose on the inlet and layflat on the delivery, from one supplier
- Hose and couplings made and pressure tested together as one assembly
- Trace numbers so a field failure becomes an investigation, not an argument
By the Numbers
Where the Company Stands Today
2008
Founded
2010
Own Production Since
50+
Export Countries
1/2 in - 30 in
Size Range
1.5x for 2 h
Pre-Shipment Test
48
Products In Range
Why Choose Jason
Six Reasons Buyers Place a Second Order
We run our own weaving, extrusion and coupling production, so lead time, colour, printing and coupling type are all decided in one plant rather than across three suppliers.
01
Factory Direct
Our own factory controls the lead time and the price, rather than quoting through a trading layer.
02
OEM and ODM
Extensive OEM and ODM production experience, with exclusive protection of your designs.
03
Global Standards Compliance
Products are made to conform with international quality standards for reliability and performance.
04
Rich Experience
Jason has manufactured layflat hose since 2008 and run its own production line since 2010.
05
Total Solution
We supply solutions across several industries and keep developing products for customers.
06
Comprehensive Range
48 products across TPU, NBR and PVC layflat hose, suction hose, fire hose and couplings.
Quality Control
Our Own Test Centre Checks the Material Before and After Production
Jason states that it is committed to meeting or exceeding international standards including NFPA, BS6391, EN14540, UL19, FM, NSF and ABNT, and that most products have passed CE, FM, UL, EN and Kitemark certification. Current certificate scope for a specific product is confirmed on request.
Solutions
How We Work With You
OEM and ODM Hose Production
Jason started as a trade company in 2008 and put its own first production line into operation in 2010.
How it works
Hose and Coupling Assembly
Most hose failures in the field happen at the joint, not in the middle of the length.
How it worksQuality Control and Testing
Every manufacturing process complies with the ISO 9001 standard, and the plant runs its own test centre.
How it worksCase Studies
Recent Orders and What the Customer Needed
Firefighting and Emergency
300 Rolls of Snow Making Hose for a Beijing Winter Olympics Ski Resort
300 rolls delivered on the date the customer required, with quality maintained. The customer was satisfied and remains a repeat buyer.
Read the case
Firefighting and Emergency
200 Pieces of Light Fire Suction Hose for a Sichuan Fire Competition
200 pieces of 6 inch light fire suction hose supplied to the brigade specification.
Read the case
Firefighting and Emergency
5000 m of Rubber Fire Hose Shipped to Malaysia
An order of 5000 m in 1.5 inch and 2.5 inch at 17 bar working pressure.
Read the caseKnowledge Center
Guides Written for People Who Have to Specify the Hose
industry article
Where Layflat Hose Is Actually Used Across Industry
Layflat hose turns up in agriculture, firefighting, mining and oil and gas for the same underlying reason: it moves large volumes of liquid to places where permanent pipe cannot be justified.
Read the guidematerial guide
TPU vs PVC vs NBR Layflat Hose and How to Choose
The three materials are not grades of the same thing. They differ in temperature range, pressure capability, chemical tolerance and standard length, and those four figures usually settle the decision.
Read the guide
product guide
Suction Hose and Discharge Hose Are Not Interchangeable
The most common and most expensive hose mistake on a pump is fitting a layflat hose to the inlet. Understanding why a helix is needed on one side and not the other prevents it.
Read the guideCustomer Feedback
What Buyers Have Said About Working With Us
Jason give me so much support, thanks for our business! We will work long in future.
SunnyBelink Dewatering CEO
This is my first time working with Jason, it is good. I will come again, thanks.
JoydeepGrant Fire Buyer
Jason is good, I like it very much. Good quality, I like this company.
David JonesHose Retailers
I have cooperated with this company four years, everything is ok. Good quality with good price.
Alejandro AramOlam Global Agriculture CEO
FAQ
Questions Buyers Ask Before Their First Order
What is the minimum order quantity
It depends on size, colour and product. Send the size, length and quantity you need on WhatsApp and we will confirm it against the production schedule.
Are you a factory or a trading company
A factory. Jason started as a trade company in 2008 and put its own first production line into operation in 2010. Weaving, extrusion and coupling casting all run in our own plant.
Can you produce hose under our own brand
Yes. OEM and ODM production is a standard part of our business, including colour, printing and exclusive protection of your designs.
How is the hose tested before it ships
All hoses are tested at the test pressure, and layflat hose is held at 1.5 times working pressure for 2 hours before packing.
Can we visit the factory before ordering
Yes. A Canadian customer audited our production process in detail on site before placing a 12 inch layflat hose order.
Which countries do you export to
More than 50, across firefighting and emergency, agriculture, construction, oil and gas, water wells and mining.
How quickly do you reply to an enquiry
Our team replies within 24 hours.
Tell Us the Duty and We Will Specify the Hose
Send the fluid, pressure, temperature, bore and length. Our team replies within 24 hours with a specification and a price.