Suction Hose
8 Inch Suction Hose
The 8 inch suction hose is a DN200 rigid-helix PVC hose sized for the most common heavy-duty pump on a construction or farm site.
View specifications
Industry
Construction and Civil Engineering
Construction water is temporary by definition, which is why layflat hose beats pipe on most sites: it rolls up, moves with the job and gets recovered at the end. The construction range covers suction hose for the pump inlet, discharge hose for the delivery side and large bore hose for bulk drainage.
Pain Points
What Goes Wrong in This Industry
- Rigid pipe costs on lines that will be pulled up in weeks
- Time lost recovering and re-laying pipe between site positions
- Cover wear where hose crosses vehicle routes and hardcore
- Pumps losing prime through a collapsed or leaking suction line
What Buyers Need From a Supplier
- Hose that recovers and redeploys in minutes
- Bore sizes matched to site pump fleets
- Abrasion resistant covers for daily ground contact
- Suction and discharge hose from one supplier
Recommended Products
Products We Supply Into Construction and Civil Engineering
Suction Hose
10 Inch Suction Hose
The 10 inch suction hose is a DN250 PVC suction line for trash pumps and dewatering sets working in mud, flood water and abrasive slurry.
View specifications
Suction Hose
12 Inch Suction Hose
The 12 inch suction hose is a DN300 rigid-helix PVC hose built for pump inlets that have to lift high volumes of water, slurry and debris-laden liquid without the wall collapsing.
View specifications
PVC Layflat Hose
8 Inch Discharge hose
The 8 inch discharge hose is a DN200 PVC layflat hose used to transfer large volumes of water and other liquids on industrial sites, construction sites and farms.
View specifications
PVC Layflat Hose
10 Inch Discharge Hose
The 10 inch discharge hose is a heavy duty DN250 PVC layflat hose for transferring large volumes of water on industrial, construction and agricultural sites.
View specifications
PVC Layflat Hose
12 Inch Discharge Hose
The 12 inch discharge hose is a DN300 PVC coated layflat hose for transferring high volumes of water quickly.
View specifications
PVC Layflat Hose
16 Inch Discharge Hose
The 16 inch discharge hose is a DN400 PVC layflat hose for moving very large volumes of water in agriculture, construction, civil engineering and emergency work.
View specifications
PVC Layflat Hose
Layflat Discharge Hose
Layflat discharge hose is our general purpose PVC delivery hose, made from 6 inch to 20 inch for water discharge and supply in agriculture, construction and civil engineering.
View specificationsDelivery Capability
What We Commit To on These Orders
- Suction hose in lengths to 30 m so the pump can sit on firm ground
- Discharge hose in 20 m and 50 m rolls for fast recovery
- Camlock and multilug couplings for tool-free connection
- Four colours for contractor and duty identification
Case Studies
Orders We Have Shipped Into This Industry
3000 m of 1 Inch Layflat Air Hose Shipped to America
An order of 3000 m of 1 inch layflat air hose.
Read the caseFAQ
Questions From Construction and Civil Engineering Buyers
Which hose goes on the pump inlet
A rigid helix suction hose. Layflat discharge hose collapses under vacuum and cannot be used on the inlet.
What size is most common on site
8 inch (DN200) is the size most contractors standardise on, since a 50 m roll is still a two-person lift.
How do I protect hose crossing a haul road
Use ramps at every vehicle crossing. Cover damage on crossings is the most common cause of failure we see.
Can you supply both suction and discharge hose
Yes, plus the couplings, all made in one plant.
Specify the Right Hose for Your Construction and Civil Engineering Operation
Send the duty and we will name the product, the coupling and the length. Our team replies within 24 hours.