TPU Layflat Hose
Mine Dewatering Hose
Mine dewatering hose is a high pressure TPU layflat hose built to remove large volumes of water from a mine quickly and safely.
View specifications
Industry
Mining and Quarrying
Water underground stops production, and the hose that removes it has to survive being dragged across rock in places that are slow and expensive to reach for repair. The mining range is built around abrasion resistance, long lengths and traceability.
Pain Points
What Goes Wrong in This Industry
- Water accumulation halting production while a pipeline is assembled
- Hose failure deep in a drive where access for repair is slow
- Moving large diameter pipe through restricted underground access
- Abrasion from aggressive rock surfaces cutting hose life short
What Buyers Need From a Supplier
- Extra tough walls that survive aggressive surfaces
- 200 m lengths so joints are few and placed where they can be reached
- High pressure rating for pumping up elevation
- Traceability by section of the mine
Recommended Products
Products We Supply Into Mining and Quarrying
TPU Layflat Hose
Boreline Hose
Boreline hose is a high pressure, high tensile strength layflat hose for underground water pumping.
View specifications
TPU Layflat Hose
16 Inch Layflat Hose
The 16 inch layflat hose is a DN400 TPU hose for long-distance water supply in firefighting, emergency water removal during floods, industrial bulk discharge, irrigation supply and frac solution transfer.
View specifications
TPU Layflat Hose
12 Inch Layflat Hose
The 12 inch layflat hose is a DN300 TPU hose used for high volume water transfer in agriculture, firefighting, oil and gas and general industry.
View specifications
Suction Hose
10 Inch Suction Hose
The 10 inch suction hose is a DN250 PVC suction line for trash pumps and dewatering sets working in mud, flood water and abrasive slurry.
View specifications
Suction Hose
Fabric Reinforced Suction Hose
Fabric reinforced suction hose adds a polyester fabric layer to the rigid PVC helix, so the wall carries pressure on the discharge stroke as well as vacuum on the inlet.
View specifications
Hose Coupling
Multilug Coupling
The multilug coupling is a large bore aluminium coupling made in 6 to 12 inch (DN150 to DN300), used across firefighting, oil and gas, agriculture and industry.
View specifications
Hose Coupling
Quick VIC Coupling
Quick VIC couplings and clamps connect hose across fire protection, industrial and commercial systems.
View specificationsDelivery Capability
What We Commit To on These Orders
- Mine dewatering hose in 4 to 12 inch, 200 m lengths, TPU through the weave
- Boreline hose for vertical rising mains
- Large bore couplings in aluminium to 16 inch
- Trace number on every hose linking it back to production
FAQ
Questions From Mining and Quarrying Buyers
What makes the mine dewatering hose tough enough
High tenacity synthetic yarns with TPU extruded through the weave, which gives an extra tough abrasion resistant wall.
What sizes do you make for mine dewatering
4 inch to 12 inch.
Can it be used for emergency rescue dewatering
Yes, that is a listed application alongside routine mine dewatering.
How do you trace a hose after installation
Every hose carries a trace number covering production date, production employees and raw material sources.
Specify the Right Hose for Your Mining and Quarrying Operation
Send the duty and we will name the product, the coupling and the length. Our team replies within 24 hours.