12 Inch Fire Hose
The 12 inch fire hose is a DN300 TPU-lined layflat supply hose for heavy duty firefighting, large irrigation systems and emergency drainage.
View specifications
Fire Hose
Forestry Fire Hose
Forestry fire hose, also called wildland fire hose, is the lightweight fabric-covered TPU-lined hose crews carry over rough or steep ground to fight fires in grass, brush and trees.
Product Overview
What This Hose Is Built To Do
Forestry fire hose, also called wildland fire hose, is the lightweight fabric-covered TPU-lined hose crews carry over rough or steep ground to fight fires in grass, brush and trees. It is made small and light on purpose: DN16 (5/8 inch), DN19 (3/4 inch), DN25 (1 inch) and DN38 (1 1/2 inch), in 15 m (50 ft) and 30 m (100 ft) lengths, yellow, rated -50°C to 80°C.
Key Benefits
- Small bores and short lengths keep the load down when hose is carried on the back
- Yellow cover is visible in smoke and undergrowth
- Abrasion resistant for hose dragged over rock, stumps and burnt ground
- TPU lining stays flexible through the full -50°C to 80°C range
Specifications
Published Specification
These are the figures published for this product. Working pressure, colour, length and coupling type are made to order, so confirm the final specification with us before purchase.
| Liner | High quality TPU |
|---|---|
| Color | Yellow, or as required |
| Size | DN16(5/8 inch), DN19(3/4 inch)，DN25(1 inch), DN38(1 1/2 inch) |
| Length | 15m (50ft), 30m (100ft) |
| Temperature | -50°C～+80°C(-60°F to 176°F ) |
Problems It Solves
Why Buyers Move To This Product
- Crews carrying too much weight to reach a fire edge on steep terrain
- Hose abrading through where it is dragged across burnt timber and rock
- Losing a line in low visibility because the cover blends into the ground
Who It Is For
- Wildland and forestry fire crews
- National park and forestry authorities
- Rural volunteer fire services
- Fire equipment distributors supplying wildland kit
Photographs
The Product as It Ships
Technical Features
- Lightweight
- High-pressure
- Flexible
- Abrasion resistant
- Kinking
- Twisting
- Long lifetime and reliable performance and etc
Application Scenarios
- Fight fires in grass
- Brush
- And trees
Manufacturing and Quality
How It Is Made and Checked
Production Process of Fire Hose. Every manufacturing process complies with the ISO 9001 standard.
- All raw materials approved by the Department of Quality Control
- Yarn strength and skein consistency verified before weaving
- Every manufacturing process complies with the ISO 9001 standard
- All hoses tested at the test pressure
- Layflat hose held at 1.5 times working pressure for 2 hours before shipment
- Trace number recorded for production date, employees and raw material sources
Customization Options
- Colour made to order alongside the standard range
- OEM and ODM printing of your brand, with exclusive protection of your designs
- Length cut to the run you specify rather than a fixed stock length
- Couplings fitted before shipment and pressure tested as one assembly
Use Guide
- Carry in a pack or roll sized to the crew rather than the full run
- Work uphill from the anchor point so the line drains back
- Check for burn damage on the cover after every deployment
- Dry before packing, as wildland hose often goes away wet
- Keep couplings capped so grit does not enter the bore in transport
Comparison
How It Compares With Our Other Products
| Canvas Fire Hose | Canvas fire hose starts at 1 inch and goes to 12 inch for structural work, where this one stays small and light for hand carry over terrain |
|---|---|
| Double Jacket Fire Hose | Double jacket is for higher pressure lines, where forestry hose prioritises the lowest carried weight |
Related Products
Other Products in the Fire Hose Range
10 Inch Fire Hose
The 10 inch fire hose is a DN250 TPU layflat supply line used in heavy duty firefighting systems, large agricultural schemes and water discharge during construction, mining and floods.
View specifications
8 Inch Fire Hose
The 8 inch fire hose is a DN200 TPU layflat supply hose used as the feed line in heavy duty firefighting systems and large agricultural systems, and for water discharge in construction, mining and floods.
View specifications
Doctor Blade Air Hose
The doctor blade air hose delivers pressurised air to the doctor blade chamber in paper making and printing, where the blade has to stay in constant contact with the cylinder.
View specificationsFAQ
Questions About the Forestry Fire Hose
Which sizes do you make
DN16 (5/8 inch), DN19 (3/4 inch), DN25 (1 inch) and DN38 (1 1/2 inch).
What lengths are standard
15 m (50 ft) and 30 m (100 ft).
What colour is it
Yellow, or another colour to order.
What is the lining material
High quality TPU.
How cold can it be used
It is rated to -50°C (-60°F).
Can you print a service name on the hose
Yes. OEM printing is available as part of our standard OEM and ODM service.
Request a Quote on the Forestry Fire Hose
Send the size, length, working pressure, colour and quantity you need. Our team replies within 24 hours.