12 Inch Fire Hose
The 12 inch fire hose is a DN300 TPU-lined layflat supply hose for heavy duty firefighting, large irrigation systems and emergency drainage.
View specifications10 Products
Fire Hose Range
Firefighting and high temperature hose from DN16 wildland lines to 12 inch TPU supply hose.
The Range
All 10 Fire Hose Products
10 Inch Fire Hose
The 10 inch fire hose is a DN250 TPU layflat supply line used in heavy duty firefighting systems, large agricultural schemes and water discharge during construction, mining and floods.
View specifications
8 Inch Fire Hose
The 8 inch fire hose is a DN200 TPU layflat supply hose used as the feed line in heavy duty firefighting systems and large agricultural systems, and for water discharge in construction, mining and floods.
View specifications
Doctor Blade Air Hose
The doctor blade air hose delivers pressurised air to the doctor blade chamber in paper making and printing, where the blade has to stay in constant contact with the cylinder.
View specifications
Canvas Discharge Hose
Canvas discharge hose is a TPU-lined layflat hose in 6 to 12 inch, built for pumping large volumes of water in emergency drainage, construction dewatering, irrigation supply and firefighting.
View specifications
Hot Water Hose
Hot water hose is a layflat hose lined in EPDM or NBR for hot water, limewater and waste water transfer.
View specifications
Double Jacket Fire Hose
Double jacket fire hose carries two layers of woven synthetic yarn instead of one, which is what lets it work at markedly higher pressure than a single jacket hose.
View specifications
Canvas Fire Hose
Canvas fire hose is the lightweight single jacket layflat hose used to fight fires in buildings, homes and other structures, and also used for agricultural irrigation and dewatering.
View specifications
Forestry Fire Hose
Forestry fire hose, also called wildland fire hose, is the lightweight fabric-covered TPU-lined hose crews carry over rough or steep ground to fight fires in grass, brush and trees.
View specifications
Snow Making Hose
Snow making hose is a double jacket canvas hose that delivers water to snow cannon through a winter season.
View specificationsProblems This Range Solves
- Heavy hose slowing an interior attack or a drafting set-up
- Single jacket hose reaching its pressure limit on long uphill lines
- Hose stiffening and cracking in sub-zero snow making and forest work
- Ordinary hose failing next to a hot cylinder or a hot water line
Who Buys It
- Municipal, industrial and volunteer fire brigades
- Wildland and forestry fire services
- Ski resorts and snow making system installers
- Paper mills and printing plants
- Emergency drainage and dewatering contractors
Advantages
What Separates This Range in Practice
- Four liner materials available, TPU, EPDM, NBR and natural rubber, matched to temperature and chemistry
- Size span from DN16 forestry hose to DN300 supply hose in one family
- Double jacket versions for higher pressure duty
- Rated to -50°C in TPU and up to 250°C in the Viton lined doctor blade hose
Typical Application Scenarios
- Structural firefighting inside buildings
- Wildland fire attack over steep terrain
- Snow cannon water supply through a winter season
- Emergency drainage and construction dewatering
- Doctor blade air supply on a paper machine
Industries Served
Case Studies
Where This Range Has Shipped
300 Rolls of Snow Making Hose for a Beijing Winter Olympics Ski Resort
300 rolls delivered on the date the customer required, with quality maintained. The customer was satisfied and remains a repeat buyer.
Read the case
5000 m of Rubber Fire Hose Shipped to Malaysia
An order of 5000 m in 1.5 inch and 2.5 inch at 17 bar working pressure.
Read the caseKnowledge
Guides That Cover This Range
How to Get a Longer Service Life From Layflat Hose
Layflat hose rarely fails from pressure. It fails from abrasion, from being stored wet, from being folded at the same crease, and from clamps fitted in the wrong place.
Read the guideFAQ
Questions About Fire Hose
Which liner should I choose
TPU for cold and abrasion, EPDM for heat up to 150°C, NBR for oil resistance, natural rubber for general duty. Send the conditions and we will specify it.
What is the difference between single and double jacket
A double jacket has two layers of woven synthetic yarn instead of one, which lets it handle much higher pressure at the cost of some weight.
Do you make wildland fire hose
Yes. The forestry fire hose comes in DN16, DN19, DN25 and DN38 in 15 m and 30 m lengths.
How is fire hose tested before shipment
All layflat hose is tested at 1.5 times working pressure for 2 hours before packing.
Can you print our brigade name on the hose
Yes. OEM and ODM printing and colour are a standard part of our service.
Get a Quote on Fire Hose
Send the bore size, length, working pressure and quantity. We reply within 24 hours with a specification and a price.