Knowledge Center
Five guides covering material choice, suction against discharge, coupling selection, service life and where layflat hose is actually used. Each one links to the products it describes.
industry article
Layflat hose turns up in agriculture, firefighting, mining and oil and gas for the same underlying reason: it moves large volumes of liquid to places where permanent pipe cannot be justified.
Read the guide
material guide
The three materials are not grades of the same thing. They differ in temperature range, pressure capability, chemical tolerance and standard length, and those four figures usually settle the decision.
Read the guide
product guide
The most common and most expensive hose mistake on a pump is fitting a layflat hose to the inlet. Understanding why a helix is needed on one side and not the other prevents it.
Read the guide
buying guide
Most field failures happen at the joint rather than in the middle of a hose length. Coupling choice comes down to three questions: which standard, which material, and how often the joint will be made and broken.
Read the guide
maintenance guide
Layflat hose rarely fails from pressure. It fails from abrasion, from being stored wet, from being folded at the same crease, and from clamps fitted in the wrong place.
Read the guideIf your duty does not fit neatly into a guide, send it to us directly. We reply within 24 hours.
