Pin Baffle
Listed in the Other Pins range for warp knitting machines. Send the machine brand, type and gauge for confirmation.
- ItemNo. 2670
M070560
Catalogue item No. 2669This item is listed in the Other Pins range on the original Huaxiatex catalogue under the reference M070560. No further written description was published for it. Send the machine brand, the machine type, the gauge and a photograph of the part you are replacing and the match will be confirmed before anything is shipped.
- Part ReferenceM070560
- CategoryOther Pins
- Catalogue ItemNo. 2669
- Supplied FromBeijing, China
Product Overview
This item is listed in the Other Pins range on the original Huaxiatex catalogue under the reference M070560. No further written description was published for it. Send the machine brand, the machine type, the gauge and a photograph of the part you are replacing and the match will be confirmed before anything is shipped.
M070560 is listed on the Huaxiatex catalogue in the Other Pins category, part of the Elements And Pins range. Chuck sleeves, ear plates, linings, baffles and teeth pins.
What This Part Does
This category holds the small precision parts that go with the pin families: chuck sleeves in 0.62 and 0.72, cleaners and spring plates, ear plates plain and with four holes, linings, pin baffles and teeth pins.
Where It Is Used
Element rebuilding on warp knitting machines.
Who It Is For
Warp knitting mills and maintenance teams replacing worn other pins, machine builders and rebuilders sourcing elements for refurbishment, and agents supplying spare parts to knitting plants. Products have been exported worldwide, covering Europe, Asia, Africa, Middle East.
Problems It Solves
- A machine standing because one worn part cannot be sourced quickly.
- A part with no readable number and no surviving parts book.
- Spare parts spread across several suppliers, each with its own minimum order.
- Replacement parts arriving in the wrong gauge because only the machine type was quoted.
Specification
| Part Reference | M070560 |
|---|---|
| Category | Other Pins |
| Catalogue Item | No. 2669 |
| Supplied From | Beijing, China |
Where a dimension is not published on the original catalogue it is not shown here. Send the old part or its measurements and it will be confirmed on the quotation rather than assumed.
Category Specification
| Chuck sleeve sizes | 0.62 and 0.72 |
|---|---|
| Teeth pin example | 12G, 0.36-0.20 |
| Related parts | Cleaners, spring plates, ear plates, linings, pin baffles |
How To Order
Send These Five Things
- Machine brand and machine type, for example Karl Mayer HKS or LIBA.
- Machine gauge in needles per inch, for example E28.
- The number cast or stamped on the old part, if it still reads.
- A photograph of the worn part next to a ruler.
- Quantity required and whether this is a trial or a running order.
Send them by WhatsApp on 0086-13693077663 or by email to [email protected]. WhatsApp is quicker for photographs; email is better where a written quotation has to reach a purchasing department.
Delivery
The company statement on delivery is that quick delivery is always done for any orders, even for a small order size. Tell us on the enquiry whether the machine is stopped, because an urgent single item and a routine restock are handled differently.
In This Category
Related Parts In Other Pins
Other items listed in the same category on the Huaxiatex catalogue.
Sinker Pins 12G 14G 0.50-0.25 0.50-0.43 0.43-0.22
Listed in the Other Pins range for warp knitting machines. Send the machine brand, type and gauge for confirmation.
- ItemNo. 2671
Sinker Pins 5157-2 and 5156-1
Listed in the Other Pins range for warp knitting machines. Send the machine brand, type and gauge for confirmation.
- ItemNo. 2672
Teeth Pins 12G 0.36-0.20
Listed in the Other Pins range for warp knitting machines. Send the machine brand, type and gauge for confirmation.
- ItemNo. 2673
Chuck Sleeve 0.62 and 0.72
Listed in the Other Pins range for warp knitting machines. Send the machine brand, type and gauge for confirmation.
- ItemNo. 2664
Cleaner and Spring Plate
Listed in the Other Pins range for warp knitting machines. Send the machine brand, type and gauge for confirmation.
- ItemNo. 2665
Questions About M070560
Will M070560 fit my machine?
Send the machine brand, the machine type and the gauge together with a photograph of the part you are replacing. The match is confirmed against the catalogue reference before anything is shipped.
What information do you need to quote?
The part reference or a photograph, the machine brand and type, the gauge, and the quantity. Sending all of it at once avoids a round trip.
How do I identify a chuck sleeve size?
Measure the bore of the old sleeve. Two sizes are listed here, 0.62 and 0.72.
Can these be supplied with the matching pins?
Yes. List the pins and the small parts on the same enquiry and they will be quoted together.
Can I order a single piece?
Yes. The company statement is that quick delivery is done for any order, even for a small order size.
Quote M070560
Send the machine brand, machine type, gauge and quantity and we will come back with a price. Single pieces are accepted.