Warp Knitting Spare Parts
Needle Covers
Needle covers by length, plus butterfly plates and press covers.
What This Part Does On The Machine
The needle cover closes the needle bar over the shanks so that the needles are held down in their slots and lint cannot pack in behind them. It has to sit flat over the full length or the needles at the ends will lift.
Needle covers in this range are listed by overall length, from about 71mm to about 143mm, and by machine, including covers for KS, TM and LIBA warp knitting machines. Butterfly plates, tongue press covers and plates are listed alongside them.
Where It Is Used
Karl Mayer, KS, TM and LIBA warp knitting machines.
What To Send With Your Enquiry
- Machine brand and machine type.
- Overall length of the old cover, measured end to end.
- A photograph of the cover and of how it seats.
- Quantity required.
Category At A Glance
| Parts listed | 34 |
|---|---|
| Selection basis | Overall length in millimetres, and machine type |
| Length range listed | About 71mm to about 143mm |
| Related parts | Butterfly plates, tongue press covers, plates |
Talk To Us About This Range
Send the machine details and a photograph and we will confirm the exact item.
Machine Applications
All 34 Parts In This Category
Listed with the reference used on the original Huaxiatex catalogue. Click any part for its full page.
How We Handle This Range
Small Orders And Fast Delivery
A stopped machine is not a big order. It is an urgent one.
Read MoreConsolidated Spare Parts Supply
One source across elements, bars, lubrication, drive and patterning.
Read MoreOther Categories In Warp Knitting Spare Parts
Oil Bellows And Oil Cups
One, three and five layer oil bellows, cups, bases and rings.
22 parts listed
Tension Plates
Tension plates and tension springs in 12 to 26 pin formats.
14 parts listed
Needle Belts
Karl Mayer, KS and LIBA needle belts in 40 and 80 pin formats.
4 parts listed
Guide Bar Frames And Ball Bearings
Guide bar frames, ball bearings and machine axes.
28 parts listed
Flizers, Sliders And Rods
Flizers, sliders, connecting rods and rod bowls.
16 parts listed
Steel Wire Ropes
Steel wire ropes from 12cm to 30cm, wires, locks and hooks.
17 parts listed
Weft Hooks
Weft hooks listed by part number.
8 parts listed
Chain Links And Pattern Discs
Pattern discs and chain links for Karl Mayer and LIBA.
7 parts listedNeedle Covers FAQ
The listings are named by length. How do I measure?
Measure the old cover end to end and match it to the nearest listed length, then confirm with a photograph before ordering.
Are covers machine specific as well as length specific?
Yes. Several covers in this range are listed against a specific machine, such as KS, TM or LIBA.
How do I confirm the part fits my machine?
Send the machine brand, the machine type and the gauge together with a photograph of the old part. Where a number is cast or stamped on the part, send that as well. We match against the reference used on this site and confirm before anything is produced or shipped.
Can you supply a small quantity?
Yes. The original company statement is that quick delivery is done for any order, even for a small order size. Send the quantity you actually need and we will quote it.
Which countries do you ship to?
Products have been exported worldwide, covering Europe, Asia, Africa and the Middle East.
How do I get a price?
Send the part reference, the gauge and the quantity by WhatsApp or email to [email protected] and we will come back with a quotation.
Get A Quotation For Needle Covers
Send the machine brand, machine type, gauge and quantity. Quick delivery is done for any order, even for a small order size.