L-20-3-41
Catalogue item No. 1793We supply all kinds of guide units for karl mayer and liba warp knitting machines. Quality is good. Prices are reasonable. Welcome your inquiries.
- Part ReferenceL-20-3-41
- CategoryGuide Units
- Machine BrandLIBA, Karl Mayer
- Catalogue ItemNo. 1793
- Supplied FromBeijing, China
Product Overview
We supply all kinds of guide units for karl mayer and liba warp knitting machines. Quality is good. Prices are reasonable. Welcome your inquiries.
L-20-3-41 is listed on the Huaxiatex catalogue in the Guide Units category, part of the Warp Knitting Machine Parts range. Cast guide units that lap the yarn around the needle.
What This Part Does
Guides are the thin blades with an eye at the tip that carry the warp yarn. The guide bar swings them through the needle line and shogs them sideways, and that combination of swing and shog is what decides the lapping and therefore the fabric structure.
Where It Is Used
Tricot and raschel machines from Karl Mayer and LIBA across the gauge range.
Who It Is For
Warp knitting mills and maintenance teams replacing worn guide units, machine builders and rebuilders sourcing elements for refurbishment, and agents supplying spare parts to knitting plants. Products have been exported worldwide, covering Europe, Asia, Africa, Middle East.
Problems It Solves
- A machine standing because one worn part cannot be sourced quickly.
- A part with no readable number and no surviving parts book.
- Spare parts spread across several suppliers, each with its own minimum order.
- Replacement parts arriving in the wrong gauge because only the machine type was quoted.
Specification
| Part Reference | L-20-3-41 |
|---|---|
| Category | Guide Units |
| Machine Brand | LIBA, Karl Mayer |
| Catalogue Item | No. 1793 |
| Supplied From | Beijing, China |
Where a dimension is not published on the original catalogue it is not shown here. Send the old part or its measurements and it will be confirmed on the quotation rather than assumed.
Category Specification
| Element type | Cast guide unit |
|---|---|
| Reference format | L, ML, KL, AL and DL series, and LIBA numeric references |
| Machine brands | Karl Mayer, LIBA and compatible |
How To Order
Send These Five Things
- Machine brand and machine type, for example Karl Mayer HKS or LIBA.
- Machine gauge in needles per inch, for example E28.
- The number cast or stamped on the old part, if it still reads.
- A photograph of the worn part next to a ruler.
- Quantity required and whether this is a trial or a running order.
Send them by WhatsApp on 0086-13693077663 or by email to [email protected]. WhatsApp is quicker for photographs; email is better where a written quotation has to reach a purchasing department.
Delivery
The company statement on delivery is that quick delivery is always done for any orders, even for a small order size. Tell us on the enquiry whether the machine is stopped, because an urgent single item and a routine restock are handled differently.
In This Category
Machine Applications
Related Guides
Related Solutions
Related Parts In Guide Units
Other items listed in the same category on the Huaxiatex catalogue.
L-24/2-0-49
We supply all kinds of guide units for karl mayer and liba warp knitting machines. Quality is good. Prices are reasonable. Welcome your inquiries.
- MachineLIBA
- ItemNo. 1796
L-24/2-84-63
We supply all kinds of guide units for karl mayer and liba warp knitting machines. Quality is good. Prices are reasonable. Welcome your inquiries.
- MachineLIBA
- ItemNo. 1797
L-28-66-0 II
We supply all kinds of guide units for karl mayer and liba warp knitting machines. Quality is good. Prices are reasonable. Welcome your inquiries.
- MachineLIBA
- ItemNo. 1799
Questions About L-20-3-41
Will L-20-3-41 fit my machine?
Send the machine brand, the machine type and the gauge together with a photograph of the part you are replacing. The match is confirmed against the catalogue reference before anything is shipped.
What information do you need to quote?
The part reference or a photograph, the machine brand and type, the gauge, and the quantity. Sending all of it at once avoids a round trip.
What causes a single vertical line in the fabric?
Most often one guide with a worn or chipped eye. Mark the needle position, count across to the unit and replace that unit.
Are guide units gauge specific?
Yes. The guide spacing has to match the needle spacing, so the gauge must be stated on the order.
Can I order a single piece?
Yes. The company statement is that quick delivery is done for any order, even for a small order size.
Quote L-20-3-41
Send the machine brand, machine type, gauge and quantity and we will come back with a price. Single pieces are accepted.