Welded Mesh Fence
Rigid panel fencing that arrives straight, lines up on a 2440 mm post grid and stays rust-free after installation.
Complete Perimeter Packages From Panel to Blade Topping
One order, one container, one set of dimensions that agree with each other.
The Problem
Why This Needs A Process
Most perimeter failures are integration failures. The panels come from one supplier, the posts from another and the topping from a third, and the first three hundred metres of set-out reveals that none of the dimensions agree. Anwang makes all three in the same plant.
Process
Step By Step
Define the boundary
Total metres, ground profile, required height and whether the boundary must deter or only demarcate.
Choose the structure
Welded panels for a formal straight boundary; chain link where the ground is uneven or the fence will be moved.
Choose the finish
Electro galvanized inland, hot dipped or PVC coated in exposed and coastal air, stainless in chemically aggressive sites.
Specify the topping
Blade type from the eight BTO and CBT specifications, then coil diameter, converted into coils using the published covering lengths.
Confirm the set-out
Panel length 2405 mm against post centres 2440 mm, with pole height matched to panel height from the table.
Pack and ship
Panels stacked and edge-protected, coils compressed and tied, documents issued under our own export certificate.
Products Involved
What This Solution Is Built From
Chain Link Fence
Diamond mesh that follows the ground instead of fighting it, in eight openings and five wire materials.
Razor Barbed Wire
Blade geometry and coil diameter published in full, so you can specify the deterrent instead of guessing it.
Galvanized Iron Wire
Two galvanizing routes, two gauge ranges, and a zinc coating figure you can actually specify against.
FAQ
Complete Perimeter Security Packages Questions
What do you need from me to quote a perimeter?
Total metres, required height, ground profile and whether a razor topping is needed. That is enough for a firm quotation on panels, posts and topping.
Can you match posts to a non-standard panel height?
Yes. The four stock panel heights have published pole heights; other panel heights are made to order and the pole is matched to them.
How is the razor topping quantified?
By metres of perimeter, using the coil table. A 500 mm CBT-65 single coil covers 10 m; a 960 mm cross type coil in BTO-12, 18 or 22 covers 9 m.
Is the whole package shipped together?
Yes, it is all made in the same plant in Anping and consolidated into one shipment.
Let Us Work Through It With You
Send what you know and we will tell you what else we need. No form, no call centre - the factory answers.