Galvanized Iron Wire
Two galvanizing routes, two gauge ranges, and a zinc coating figure you can actually specify against.
Galvanized and Black Iron Wire From One Anping Mill
The wire the mesh is made from, sold on its own with the gauge table attached.
Full Range
All 2 Products in Wire Products
The Problem
What This Range Is For
Wire is ordered by a gauge number that means three different diameters depending on the system used, and by the word galvanized, which says nothing about how much zinc is on it. Both problems are solved here by publishing the conversion table and the coating range.
Who Buys From This Range
- Mesh weavers and wire product manufacturers buying feedstock
- Construction merchants stocking tie and binding wire
- Expressway and construction fencing contractors
- Agricultural and packaging users
Core Strengths
- SWG, BWG and metric conversion published for 8# to 22#
- Hot dipped zinc coating specified between 40 and 300 g/m2
- Black iron wire at 500-700 MPa and black annealed wire at 300-450 MPa
- Five supplied forms: binding, loop tie, cut wire, J wire and U wire
Typical Application Scenarios
- Feedstock for weaving wire mesh and fencing for expressway and construction
- Rebar tying on site with pre-cut annealed loop ties
- Baling and packaging with heavier black steel wire
- Long-life exposed applications using hot dipped galvanized wire
Industries
Where This Range Is Used
Construction and Building
The mesh, the grating, the screen and the tie wire on one packing list.
Road Rail and Airport Infrastructure
Boundaries and embankments for projects that are measured, inspected and signed off.
Agriculture Livestock and Breeding
Mesh for buildings that stay damp and animals that test every joint.
FAQ
Wire Products Questions
How much zinc is on your hot dipped wire?
40 to 300 g per square metre. The thick coating layer gives super corrosion resistance with a firm coating.
What gauge ranges do you cover?
Electro galvanized 8# to 16#, hot dip galvanized 8# to 24#, and black wire from 0.4 mm to 5.0 mm.
Which wire is used for rebar tying?
Black annealed wire at 300-450 MPa, usually supplied as pre-cut loop tie wire.
Is 14# the same in every gauge system?
No - 2.03 mm in SWG and 2.11 mm in BWG. Always state the system your order uses. The full table is published on the galvanized iron wire page.
Quote The Whole Wire Products Package
One factory, one order, one container. Send the specification and the quantity and we will price it as a package.