Wall Panels Flooring And Bed Slats From One Chinese Factory Group
Twenty products across twelve ranges: fluted interior WPC panels from 160mm to 210mm, outdoor cladding, SPC and LVT flooring, bamboo charcoal and acoustic panels, UV marble sheet and FSC certified bed slats. Every panel here is published with its section, its length and what it is made of.
Sections Held To The Profile Drawing Not To The Nearest Millimetre
Panels are extruded to the published section, veneer laminated under hot and cold pressing, side slotted where the profile calls for it, then checked during the run rather than after packing. That is what keeps a 2900mm panel straight and a joint closed.
Customised Sections Cut To Your Module Before They Ship
Width, depth, length and colour are customizable across the panel ranges, and bed slats are cut to your frame drawing. Sending panels cut to the wall module rather than to a stock length is what takes the waste out of a site.
Twelve Ranges Across Wall Panels Flooring And Bed Slats
Wall panels, flooring and bed slats: fluted interior WPC panels in four modules, outdoor WPC cladding in two sections, bamboo charcoal and acoustic panels, PS and PVC panels, PU stone, UV marble sheet, SPC and LVT flooring, WPC decking and laminated bed slats.
Acoustic Wall Panel
Wood slat acoustic panels built from engineered veneer and MDF slats over a felt made of recycled plastic, in 400x21mm and 600x21mm modules at 2.4m length.
Explore the range
Bamboo Charcoal Wall Panel
Formaldehyde-free and VOC-free interior panels of bamboo powder, wood fibre and recyclable PVC, 5mm and 8mm thick at 1220 x 1440mm, with a bamboo charcoal core that absorbs odours.
Explore the range
Indoor WPC Wall Panel
Fluted wood plastic composite wall panels in 160mm, 195mm, 196mm and 210mm modules at 2900mm length, with depths from 10mm to 23mm and a smooth wood veneer finish. Six panel codes, one detailing system.
Explore the range
LVT Flooring
Luxury vinyl tile in 1.5 to 5mm with a 0.07 to 0.7mm wear layer, in 184x950mm, 152.4x914.4mm and 177.8x1219mm planks, made from 100% virgin material.
Explore the range
Outdoor Flooring
WPC decking boards in a 140x25mm section at 2.4, 2.9, 3 and 5.4m lengths, made from 30% HDPE, 60% wood fibre and 10% additive.
Explore the range
Outdoor WPC Wall Panels
Exterior cladding boards in 219x26mm and 156x21mm sections at 2900mm, made from 60% wood fibre with recycled HDPE and finished with a co-extruded fade resistant skin.
Explore the range
PS Wall Panel
Polystyrene 3D wall panels in 150x12mm and 160x10mm profiles at 2.9m, with printed woodgrain surfaces and a surface treatment that deepens the grain.
Explore the range
PU Stone
WOOCAN PU stone wall panels moulded from polyurethane polymer in a 1200x60mm format, lightweight, flame retardant and waterproof, for indoor and outdoor walls.
Explore the range
PVC Panel
PVC wall panels and PVC ceiling panels for interior decoration, in wood plastic or stone plastic composite, with customized colours and sizes and PVC content specified from 40% to 70% on the ceiling range.
Explore the range
SPC Flooring
Stone plastic composite rigid core flooring, six layers, 4.0 to 8.0mm thick in 183mm and 230mm widths, with a unilin click joint, a wear layer to 0.7mm and a UV coating.
Explore the range
UV Board
UV marble sheet in 2.5, 2.8 and 3mm thicknesses at 1220 x 2440mm, made from PVC with calcium carbonate and finished with a UV cured decorative surface.
Explore the range
Wood Bed Slats
Laminated poplar slats and FSC certified birch LVL slats to 170mm wide, 25mm thick and 1750mm long, with the birch range supporting up to 300kg.
Explore the rangeEvery Product Publishes The Figures That Decide The Job
Section, thickness, length and material blend - on all 20 products, on one page, nothing paginated. Where the manufacturer's sheet publishes no figure, the page says so instead of filling the gap with an estimate.
Wood Slat Acoustic Panels
Wood slat acoustic panels in 400x21mm and 600x21mm at 2.4m, engineered veneer and MDF slats over recycled plastic felt. Reduce echo in offices restaurants and studios.
See the specificationBamboo Charcoal Wall Panel
Formaldehyde-free bamboo charcoal wall panels in 5mm and 8mm, 1220x1440mm. Bamboo powder wood fibre and recyclable PVC, waterproof and mildew proof interior panels.
See the specification
WPC Wall Panel Interior WW-IN16023
WW-IN16023 interior WPC wall panel, 160mm wide, 15mm deep, 2900mm long with a smooth wood veneer finish. Fluted wall panels for homes offices hotels and malls.
See the specification
LVT Flooring
LVT flooring in 1.5-5mm with 0.07-0.7mm wear layer, 184x950mm and 177.8x1219mm planks, 100% virgin material. Wood and stone decors for hotel retail and residential.
See the specification
WPC Decking
WPC decking boards in 140x25mm, 2.4 to 5.4m lengths, 60% wood fibre and 30% HDPE. Moisture proof, UV and termite resistant composite decking for export projects.
See the specification
Outdoor WPC Wall Panels
Outdoor WPC wall panels 219x26mm at 2900mm, 60% wood fibre with recycled HDPE and co-extruded fade resistant surface. Exterior cladding for villas hotels offices.
See the specification
PS 3D Wall Panel
PS 3D wall panels in 150x12mm and 160x10mm, 2.9m length, polystyrene with woodgrain finish. Waterproof formaldehyde free fluted panels for TV walls and hotels.
See the specificationPU Stone Wall Panel
WOOCAN PU stone wall panel in 1200x60mm polyurethane, lightweight flame retardant and waterproof stone effect cladding for facades background walls and front desks.
See the specificationPVC Wall Panel
PVC wall panel in wood plastic or stone plastic composite, customized colour and size, fireproof waterproof scratch resistant with over 15 years service life.
See the specification
SPC Flooring
SPC flooring 4.0-8.0mm in 183mm and 230mm widths, six layer stone plastic composite with unilin click and UV coating. Waterproof rigid core flooring for export.
See the specification
UV Marble Sheet
UV marble sheet in 2.5, 2.8 and 3mm, 1220x2440mm, PVC with CaCO3 and UV cured finish. Waterproof formaldehyde free marble and wood grain sheets for interiors.
See the specification
Poplar Bed Slats
Laminated poplar bed slats to 170mm wide, 25mm thick and 1750mm long, customizable. Strong additive free hardwood slats for bed and sofa factories.
See the specificationFive Buyers Who Each Ask A Different First Question
Building material distributors, interior fit-out contractors, hotel and hospitality buyers, facade and landscape contractors, and furniture factories buying bed slats by the container.
Building Material Distributors
Importers and wholesalers stocking wall and floor lines who need sections that repeat order after order and a range wide enough to quote most jobs from one supplier.
See what they specifyInterior Fit-Out Contractors
Contractors panelling rooms against a programme, who need panels that arrive finished, cut to the module and detailing the same way on every wall.
See what they specifyHotel And Hospitality Buyers
Procurement teams fitting rooms, corridors and public areas, where the finish has to survive constant traffic, pass indoor air quality criteria and look the same in phase two as in phase one.
See what they specifyFurniture And Bed Manufacturers
Bed and sofa factories buying slats by the container, where a broken slat becomes a warranty return and a drifting dimension jams the assembly line.
See what they specifyFacade And Landscape Contractors
Contractors cladding elevations and building terraces, where the client will not fund a maintenance programme and the material has to hold colour and dimension outdoors.
See what they specifyPanels Fail For Three Reasons And All Three Are Specification Decisions
Most decoration material complaints come down to three things: a panel that moves because the material was wrong for the room, a section that does not match the drawing so the joints never close, and a finish that fades or peels because the surface was added after the fact rather than built in. Every range here is published with its section, its material blend and how the surface is applied.
What Usually Goes Wrong
- A panel specified on price and a photograph, with no published section to check it against
- An interior panel used on an elevation, where it has no co-extruded weather skin
- A section quoted for the range and never tied to the code on the order
- Two deliveries of the same code that do not match in colour on one wall
- A fluted panel sold as acoustic treatment, with no felt behind the slats to absorb anything
What This Manufacturer Publishes Instead
- One supplier across wall, floor and bed slat lines, with customised sections and lengths, ten self-operated and cooperative factories behind the volume, and specifications published rather than promised.
- The section and the length published per code, not per range name
- The material blend published, so two quotations can actually be compared
- Customisation stated as what can be cut and matched, not as a slogan
Six Stages From Compound To Bundled And Loaded Boards
These are the six stages the panel and slat lines run through, and the specific field failure each one exists to prevent.
Extrusion
A section that drifts mid-run turns into cutting waste and joints that will not close on site.
The wood flour and polymer compound is extruded through the profile die and pulled to the published section.
Co-extrusion
A surface layer added after the fact peels; one laid down in the same pass does not.
The weather resistant skin is co-extruded onto the board body in the same pass as the core.
Hot and cold pressing
A veneer that lifts at the edge shows up months after the wall is handed over.
The decor veneer is laminated to the panel face and bonded under hot then cold pressing.
Side slotting
Butt joints open and show a shadow line; a slotted edge holds the run in line.
The panel edges are machined with the interlocking side slot after pressing.
Inspection
A dimension checked after packing is a dimension checked too late.
Section, colour and surface are checked against the order spec during the run, not only at the end.
Packing and loading
Edge damage in transit is the most common reason a panel order is rejected on arrival.
Boards are bundled, film wrapped or cartoned and palletised for container loading.
Six Application Scenarios With The Specification Decisions Behind Them
Client names, locations, quantities and contract values are not published by the manufacturer, so none are stated here. Each page describes what the factory's own photograph shows and what the published specification supports.
Fluted WPC Panels On An Interior Wall Programme
A repeated interior wall detail that has to work in rooms of different sizes, with the same trim system and the same veneer finish throughout.
Read what was specified
WPC Cladding On A Villa Elevation
A wood look on an elevation and its terrace, where the building owner will not fund repainting or board replacement.
Read what was specifiedWood Slat Acoustic Panels In A Hard Surfaced Room
A meeting room or restaurant with hard parallel surfaces, where speech is hard to follow and the client still wants a timber interior.
Read what was specifiedUV Marble Sheet On Walls And Furniture
A commercial interior specified in marble, where slab weight, breakage and stone fixing labour do not fit the programme or the structure.
Read what was specifiedSPC And LVT Across A Multi-Room Rollout
A rollout covering dry rooms, wet rooms and corridors, where one decor has to run through all of them and the substrates are not equally flat.
Read what was specifiedBed Slat Supply To A Frame Factory
A bed programme running two model tiers, where the commercial models need a load rated, certified slat and the entry models need a slat that does not break the cost target.
Read what was specifiedFour Specification Conversations That Come Up On Almost Every Enquiry
Choosing A Wall Panel By Room Condition
Eight wall panel ranges look like eight choices. They are really three questions asked in order.
Read the stage by stage guideSpecifying Indoor Against Outdoor WPC
Both are wood plastic composite. Only one of them has a weather skin, and that is the whole difference.
Read the stage by stage guideChoosing Between SPC And LVT Flooring
Rigid core or flexible plank. The substrate and the traffic decide it, not the decor.
Read the stage by stage guideSpecifying Bed Slats For A Frame Programme
Slat failures are frame failures. Spec them from the load and the frame drawing, not from the price list.
Read the stage by stage guideEight Guides For People Who Specify Panels And Floors
How the room decides the panel material, what co-extrusion does that a bonded surface cannot, why a slat panel absorbs sound and a fluted one does not, what separates SPC from LVT, what drives the cost of a panel order, and how bed slats are specified from a frame drawing. Every figure quoted comes from a specification published on this site.
How to Choose a Wall Panel by the Room It Goes In
Eight wall panel ranges, one decision tree. The room condition decides the material, and the finish is the last thing to pick, not the first.
Read the guideIndoor WPC Against Outdoor WPC and What Actually Separates Them
Same material family, two different products. Co-extrusion, section depth and how you fix them are the three things that matter.
Read the guideHow Wood Slat Acoustic Panels Actually Reduce Noise
The felt does the work, not the timber. What the construction is, where it helps and what it will not fix.
Read the guideFrequently Asked Questions
Which wall panel should I start with?
Can sections and lengths be customised?
Do you supply samples?
What certifications do you hold?
What is the minimum order quantity?
How do enquiries reach the factory?
Tell Us What The Room Is
Send the room condition, the wall or floor area and the finish you want. A shortlist with the matching published specifications comes back the same way.