- Home
- Knowledge Center
Eight Guides For People Who Specify Panels And Floors
How the room condition decides the panel material, what co-extrusion does that a bonded surface cannot, why a slat panel absorbs sound and a fluted one does not, what actually separates SPC from LVT, what drives the cost of a panel order, how to install without callbacks, what outdoor boards need and what they do not, and how bed slats are specified from a frame drawing. Every figure quoted comes from a specification published on this site, and where a figure does not exist the guide says so.
How to Choose a Wall Panel by the Room It Goes In
Eight wall panel ranges, one decision tree. The room condition decides the material, and the finish is the last thing to pick, not the first.
Read the guide
Indoor WPC Against Outdoor WPC and What Actually Separates Them
Same material family, two different products. Co-extrusion, section depth and how you fix them are the three things that matter.
Read the guide
How Wood Slat Acoustic Panels Actually Reduce Noise
The felt does the work, not the timber. What the construction is, where it helps and what it will not fix.
Read the guide
SPC or LVT Which Rigid Core or Vinyl Floor to Specify
Same decor, different construction. Substrate flatness, installation method and wear layer decide, not the photograph.
Read the guide
What Drives the Cost of a Wall Panel Order
Material, section, length, finish and loading. Five levers, and only two of them are usually negotiated.
Read the guide
Installing WPC and PVC Wall Panels Without Callbacks
Setting out, fixing, expansion and trims. The four places installations go wrong and what to do instead.
Read the guide
Maintaining WPC Cladding and Decking Outdoors
What these boards need, what they do not need, and the two mistakes that shorten their life.
Read the guide
Specifying Bed Slats for a Frame Programme
Laminated against sawn, birch against poplar, camber, load and the geometry that has to come from the frame drawing.
Read the guideAsk A Question The Guides Do Not Answer
Technical questions are answered by email during working hours, GMT+8.