SPC Flooring · Flooring

SPC Flooring

Name: SPC Flooring
Brand: WOOCAN

SPC flooring 4.0-8.0mm in 183mm and 230mm widths, six layer stone plastic composite with unilin click and UV coating. Waterproof rigid core flooring for export.

Width: 183mm and 230mmThickness: 4.0 / 5.0 / 6.0 / 7.0 / 8.0mmMaterial: PVC blended with natural stone powder, no plasticiser

Request A Quote Request A Sample

SPC flooring planks laid to show a wood grain decor across several boards

Product Overview

SPC flooring is a stone plastic composite board of PVC and natural stone powder, built up in six layers: virgin PVC balance sheet, fibreglass layer, PVC middle layer with a unilin click, decorative film, wear layer and UV coating. It carries no plasticiser, so it stays rigid and dimensionally stable in kitchens, bathrooms and basements where vinyl and laminate normally fail. Thicknesses run 4.0 to 8.0mm with a wear layer up to 0.7mm, in 183mm and 230mm widths.

Key Benefits

Stone powder core gives a rigid board that bridges minor substrate unevenness
No plasticiser in the core, unlike regular vinyl flooring
Waterproof construction suited to kitchens, bathrooms and basements
Unilin click joint installs without adhesive and can be lifted for rework
UV coating over the wear layer protects the decor from scuffing and cleaning chemicals

At A Glance

Family: Flooring
Category: SPC Flooring
Type: SPC Stone Plastic Composite Flooring
Thickness: 4.0 / 5.0 / 6.0 / 7.0 / 8.0mm
Width: 183mm and 230mm
Wear layer: up to 0.7mm

Product Photographs

The Profile The Surface And The Finish Options

These are the manufacturer's own photographs of this product, reproduced as published: the section, the surface finish and the colour options that were photographed together. Nothing here is a rendering.

SPC flooring plank end showing the stone plastic composite core and click joint

SPC flooring planks stacked showing thickness options

Who It Is For

Flooring importers and project buyers who need a waterproof rigid core floor that installs fast, tolerates spills and pet stains, and holds its shape over long runs.

Problems It Solves

Laminate floors that swell and lift at the joints after a spill
Vinyl sheet that telegraphs every bump in the subfloor
Plasticiser content that fails indoor environmental requirements
Glue down installs that make future board replacement expensive

Application Scenarios

Kitchens and bathrooms
Basements and utility rooms
Rental apartments and pet households
Retail and light commercial floors
Hotel rooms needing a water tolerant floor

Technical Features

Type: SPC Stone Plastic Composite Flooring.
Thickness: 4.0 / 5.0 / 6.0 / 7.0 / 8.0mm.
Width: 183mm and 230mm.
Wear layer: up to 0.7mm.
Structure: 6 layers: PVC balance sheet, fibreglass, PVC middle layer with unilin click, decor film, wear layer, UV coating.
Material: PVC blended with natural stone powder, no plasticiser.

Specification

Published Specification

Every row below is reproduced from the manufacturer's published specification for this range. Rows shown in italics are figures the specification does not publish; those are confirmed in writing rather than estimated here.

Type	SPC Stone Plastic Composite Flooring
Thickness	4.0 / 5.0 / 6.0 / 7.0 / 8.0mm
Width	183mm and 230mm
Wear layer	up to 0.7mm
Structure	6 layers: PVC balance sheet, fibreglass, PVC middle layer with unilin click, decor film, wear layer, UV coating
Material	PVC blended with natural stone powder, no plasticiser

Use Guide

Lay as a floating floor over a clean, dry substrate, click the unilin joint along the long edge first, and leave a perimeter expansion gap.
Clean with a damp mop; no wax or polish needed.

Quality Control

Click joint profile gauged so planks lock without gapping
Board thickness and width checked per lot against the 183mm and 230mm specs
Wear layer and UV coating continuity inspected
Decor film register matched to the approved sample

Materials

PVC blended with natural stone powder, with no plasticiser in the core.
Virgin PVC balance sheet on the underside of the board.
Fibreglass layer between the balance sheet and the middle layer.
Decorative paper film, abrasion resistant paper and a UV coating on the face.

Manufacturing Process

['Extrusion', 'A section that drifts mid-run turns into cutting waste and joints that will not close on site.', 'The wood flour and polymer compound is extruded through the profile die and pulled to the published section.']
['Hot and cold pressing', 'A veneer that lifts at the edge shows up months after the wall is handed over.', 'The decor veneer is laminated to the panel face and bonded under hot then cold pressing.']
['UV coating', 'An uncured or uneven coat scuffs under cleaning within the first season.', 'The UV coating is applied over the wear layer and cured in line.']
['Inspection', 'A dimension checked after packing is a dimension checked too late.', 'Section, colour and surface are checked against the order spec during the run, not only at the end.']
['Packing and loading', 'Edge damage in transit is the most common reason a panel order is rejected on arrival.', 'Boards are bundled, film wrapped or cartoned and palletised for container loading.']

Certification Standards

Production follows . Certificates are sent per product on request rather than posted publicly, because the documents a shipment needs depend on the destination market.

Customisation Options

Thickness selected from 4.0mm to 8.0mm for your traffic and substrate
183mm or 230mm plank width
Decor film matched to your collection
OEM packaging and retail display samples

Comparison

How It Compares With The Alternatives

A technical comparison against other ways of solving the same problem. Nothing here is a performance claim against a named competitor product.

Against the alternative material	Against LVT, SPC is rigid rather than flexible, so it hides small subfloor defects and installs as a floating click floor. Against laminate, the stone plastic core does not swell when water sits on the joint.
Against a panel sold without a published section	This product publishes 183mm and 230mm. A supplier quoting a range name and a photograph is asking you to discover the section after the container arrives, which is where cutting waste and joints that will not close come from.
Against a quotation that does not state the material	The blend here is published as PVC blended with natural stone powder, no plasticiser. Two quotations cannot be compared until both state what is actually in the board.
Against the rest of this range	See the SPC Flooring page for what this range does that the others do not, and the related products below for the nearest alternatives.

Questions

SPC Flooring Questions

Which thickness should I order?

4.0 to 8.0mm are available. Thinner boards suit flat substrates and lighter traffic; 6.0mm and above give more rigidity and a more solid footfeel.

Is SPC really waterproof?

The core is PVC and stone powder, which does not absorb water. That is why it is used in kitchens, bathrooms and basements.

Does it contain plasticiser?

No. Unlike regular vinyl flooring there is no plasticiser inside.

What plank widths do you run?

183mm and 230mm.

Can it be installed over an existing tile floor?

Yes, if the tiles are sound and reasonably level. The rigid core tolerates minor unevenness better than flexible vinyl.

How do I request a quotation?

Send thickness, width, decor and square metres by WhatsApp or email and we will come back with price and container loading.

Flooring

WPC Decking

WPC decking boards in 140x25mm, 2.4 to 5.4m lengths, 60% wood fibre and 30% HDPE. Moisture proof, UV and termite resistant composite decking for export projects.

See the specification