WPC wall panels, SPC and LVT flooring and laminated bed slats, made in China Mon-Sun 09:00-17:00 GMT+8 [email protected] +86 156 6841 8983
  1. Home
  2. Products
  3. Bamboo Charcoal Wall Panel
  4. Bamboo Charcoal Wall Panel
Bamboo charcoal wall panel with a wood grain surface finish
Bamboo Charcoal Wall Panel · Wall Panels

Bamboo Charcoal Wall Panel

Formaldehyde-free bamboo charcoal wall panels in 5mm and 8mm, 1220x1440mm. Bamboo powder wood fibre and recyclable PVC, waterproof and mildew proof interior panels.

Size: 1220 x 1440mm, customizedThickness: 5mm, 8mmMaterial: Bamboo powder, wood fibre and recyclable PVC
Bamboo charcoal wall panel with a wood grain surface finish

Product Overview

Bamboo charcoal wall panels are pressed from bamboo powder, wood fibre and recyclable PVC in 5mm and 8mm thicknesses at 1220mm width and 1440mm length or customized. They are formaldehyde-free and VOC-free, and the bamboo charcoal core absorbs odours and pollutants, which is why they get specified for bedrooms, clinics and hotel interiors where indoor air quality is part of the brief. Surfaces can imitate marble or wood with seamless pattern matching between panels.

Key Benefits

  • Formaldehyde-free and VOC-free composition for indoor air quality requirements
  • Bamboo charcoal core absorbs odours and airborne pollutants
  • Water resistant and mildew resistant, suited to humid climates
  • Seamless pattern matching so a full wall reads as one surface
  • 5mm and 8mm thickness options for different substrate and trim details

At A Glance

Family
Wall Panels
Category
Bamboo Charcoal Wall Panel
Type
Bamboo Charcoal Wood Veneer Wall Panel
Thickness
5mm, 8mm
Size
1220 x 1440mm, customized
Material
Bamboo powder, wood fibre and recyclable PVC
Product Photographs

The Profile The Surface And The Finish Options

These are the manufacturer's own photographs of this product, reproduced as published: the section, the surface finish and the colour options that were photographed together. Nothing here is a rendering.

Who It Is For

  • Interior contractors, hotel fit-out buyers and decoration material distributors who need a low emission wall surface that survives humidity and installs faster than tiling or panelling.

Problems It Solves

  • Paint and wallpaper that blister and grow mildew in humid climates
  • Formaldehyde emission limits that rule out conventional composite panelling
  • Visible seams between panels that cheapen a feature wall
  • Slow wet trades on tight fit-out schedules

Application Scenarios

  • Hotel guest rooms and lobbies
  • Bedrooms and living room feature walls
  • Clinics and wellness spaces
  • Offices and meeting rooms
  • Humid climate interiors where paint and wallpaper fail

Technical Features

  • Type: Bamboo Charcoal Wood Veneer Wall Panel.
  • Thickness: 5mm, 8mm.
  • Size: 1220 x 1440mm, customized.
  • Material: Bamboo powder, wood fibre and recyclable PVC.
  • Performance: Waterproof, flame retardant, mildew proof.
  • Emissions: Formaldehyde-free, VOC-free.
Specification

Published Specification

Every row below is reproduced from the manufacturer's published specification for this range. Rows shown in italics are figures the specification does not publish; those are confirmed in writing rather than estimated here.

TypeBamboo Charcoal Wood Veneer Wall Panel
Thickness5mm, 8mm
Size1220 x 1440mm, customized
MaterialBamboo powder, wood fibre and recyclable PVC
PerformanceWaterproof, flame retardant, mildew proof
EmissionsFormaldehyde-free, VOC-free

Use Guide

  • Fix to a flat, dry wall with adhesive or a batten system, align the pattern direction across panels before fixing, and close the joints with matching trim.
  • Wipe clean with a damp cloth.

Quality Control

  • Panel thickness verified at 5mm and 8mm across the sheet
  • Surface film pattern matched panel to panel for seamless joints
  • Edges checked for straightness so butt joints close cleanly
  • Packing check for surface scratches and corner damage

Materials

  • Bamboo powder, wood fibre and recyclable PVC pressed as one panel.
  • Bamboo charcoal core that absorbs odours and airborne pollutants.
  • Surface films imitating marble and wood with seamless pattern matching.

Manufacturing Process

  • ['Hot and cold pressing', 'A veneer that lifts at the edge shows up months after the wall is handed over.', 'The decor veneer is laminated to the panel face and bonded under hot then cold pressing.']
  • ['Inspection', 'A dimension checked after packing is a dimension checked too late.', 'Section, colour and surface are checked against the order spec during the run, not only at the end.']
  • ['Packing and loading', 'Edge damage in transit is the most common reason a panel order is rejected on arrival.', 'Boards are bundled, film wrapped or cartoned and palletised for container loading.']

Certification Standards

Production follows . Certificates are sent per product on request rather than posted publicly, because the documents a shipment needs depend on the destination market.

Customisation Options

  • Surface decor imitating marble, wood and other finishes
  • Panel length outside the standard 1440mm
  • 5mm or 8mm thickness to suit your trim system
  • OEM packaging and sample boards
Comparison

How It Compares With The Alternatives

A technical comparison against other ways of solving the same problem. Nothing here is a performance claim against a named competitor product.

Against the alternative materialAgainst MDF panelling, the bamboo charcoal panel does not swell in humidity and carries no formaldehyde. Against marble or tile, it installs dry, weighs far less and needs no wet trade on site.
Against a panel sold without a published sectionThis product publishes 1220 x 1440mm, customized. A supplier quoting a range name and a photograph is asking you to discover the section after the container arrives, which is where cutting waste and joints that will not close come from.
Against a quotation that does not state the materialThe blend here is published as Bamboo powder, wood fibre and recyclable PVC. Two quotations cannot be compared until both state what is actually in the board.
Against the rest of this rangeSee the Bamboo Charcoal Wall Panel page for what this range does that the others do not, and the related products below for the nearest alternatives.
Questions

Bamboo Charcoal Wall Panel Questions

What thicknesses are available?
5mm and 8mm.
What is the standard panel size?
1220mm wide and 1440mm long. Other lengths are customizable.
Is it suitable for a humid climate?
Yes. The panel is water resistant and mildew resistant, which is why it is used in very humid regions.
Does it emit formaldehyde?
No. The panels are formaldehyde-free and VOC-free.
Can you match a marble pattern we already use?
Send the sample or a photo. Surfaces can be customized to imitate marble, wood and similar materials with seamless patterns.
How are the panels packed for shipping?
Panels are film protected, boxed and palletised. Send your destination port and we will confirm the loading quantity.

Request Bamboo Charcoal Wall Panel

Send the finished size, the quantity, the mounting and the destination market. A quotation and the full specification come back by email.