UV Marble Sheet
UV marble sheet in 2.5, 2.8 and 3mm, 1220x2440mm, PVC with CaCO3 and UV cured finish. Waterproof formaldehyde free marble and wood grain sheets for interiors.
Product Overview
UV marble sheet is a PVC and calcium carbonate board finished with a UV cured decorative surface, supplied 2.5, 2.8 and 3mm thick in 1220x2440mm sheets. It gives walls, ceilings, countertops and furniture a marble, wood grain or printed finish that is lightweight, waterproof and easy to cut on site, without the weight, breakage and stone fixing work that real marble slabs demand.
Key Benefits
- Full 1220x2440mm sheet covers large wall areas with few joints
- 2.5, 2.8 and 3mm options for wall, ceiling and furniture facing work
- Waterproof, flame retardant, mildew proof, insect proof and formaldehyde free
- Light enough for one installer to handle, unlike stone slabs
- Wood grain, marble finish and printed finish series for design flexibility
At A Glance
- Family
- Wall Panels
- Category
- UV Board
- Type
- UV Marble Sheet
- Thickness
- 2.5 / 2.8 / 3mm
- Size
- 1220 x 2440mm
- Material
- PVC + CaCO3 + additive
The Profile The Surface And The Finish Options
These are the manufacturer's own photographs of this product, reproduced as published: the section, the surface finish and the colour options that were photographed together. Nothing here is a rendering.
Who It Is For
- Decoration material wholesalers, furniture makers and commercial fit-out contractors who want a marble look at panel weight and panel install speed.
Problems It Solves
- Marble slabs that crack in transit and need specialist fixing on site
- Structural weight limits on ceilings and partitions that rule out stone
- Long lead times and slab to slab colour variation in natural stone
- Joint lines and edge chipping in tiled marble effect walls
Application Scenarios
- Hotel and restaurant interiors
- Shop and exhibition fit-outs
- Office reception walls
- Cinema and commercial lobbies
- Residential feature walls and furniture facing
Technical Features
- Type: UV Marble Sheet.
- Thickness: 2.5 / 2.8 / 3mm.
- Size: 1220 x 2440mm.
- Material: PVC + CaCO3 + additive.
- Performance: Waterproof, flame retardant, mildew proof, insect proof, formaldehyde free.
- Application: Home, hotel, office, exhibition, restaurant, cinema, shop.
Published Specification
Every row below is reproduced from the manufacturer's published specification for this range. Rows shown in italics are figures the specification does not publish; those are confirmed in writing rather than estimated here.
| Type | UV Marble Sheet |
| Thickness | 2.5 / 2.8 / 3mm |
| Size | 1220 x 2440mm |
| Material | PVC + CaCO3 + additive |
| Performance | Waterproof, flame retardant, mildew proof, insect proof, formaldehyde free |
| Application | Home, hotel, office, exhibition, restaurant, cinema, shop |
Use Guide
- Cut with standard woodworking tools, bond to a flat substrate with adhesive, and finish edges with matching profile trim.
- Clean with a soft damp cloth; no abrasive pads.
Quality Control
- Sheet thickness checked at 2.5, 2.8 and 3mm across the board
- UV coating gloss and cure uniformity inspected
- Pattern register and colour matched to the approved sample
- Sheet flatness and edge condition checked before packing
Materials
- PVC with calcium carbonate and additives as the sheet body.
- UV cured decorative surface, not a laminated foil.
- Wood grain, marble finish and printed finish decor series.
Manufacturing Process
- ['Hot and cold pressing', 'A veneer that lifts at the edge shows up months after the wall is handed over.', 'The decor veneer is laminated to the panel face and bonded under hot then cold pressing.']
- ['UV coating', 'An uncured or uneven coat scuffs under cleaning within the first season.', 'The UV coating is applied over the wear layer and cured in line.']
- ['Inspection', 'A dimension checked after packing is a dimension checked too late.', 'Section, colour and surface are checked against the order spec during the run, not only at the end.']
- ['Packing and loading', 'Edge damage in transit is the most common reason a panel order is rejected on arrival.', 'Boards are bundled, film wrapped or cartoned and palletised for container loading.']
Certification Standards
Production follows . Certificates are sent per product on request rather than posted publicly, because the documents a shipment needs depend on the destination market.
Customisation Options
- Pattern chosen from wood grain, marble finish and printed finish series
- Thickness selected for wall, ceiling or furniture use
- Sheet cut to size for repeat panel layouts
- OEM packaging and sample sets
How It Compares With The Alternatives
A technical comparison against other ways of solving the same problem. Nothing here is a performance claim against a named competitor product.
| Against the alternative material | Against natural marble, the sheet is lighter, does not crack in handling and arrives colour consistent across the order. Against acrylic sheet, the PVC and CaCO3 body is more rigid and carries the UV cured finish directly. |
| Against a panel sold without a published section | This product publishes 1220 x 2440mm. A supplier quoting a range name and a photograph is asking you to discover the section after the container arrives, which is where cutting waste and joints that will not close come from. |
| Against a quotation that does not state the material | The blend here is published as PVC + CaCO3 + additive. Two quotations cannot be compared until both state what is actually in the board. |
| Against the rest of this range | See the UV Board page for what this range does that the others do not, and the related products below for the nearest alternatives. |
UV Marble Sheet Questions
What sheet size do you supply?
What thicknesses are available?
What is it made of?
Can it be used on countertops?
How many patterns are available?
Do you supply samples?
Products Buyers Shortlist Alongside This One
Bamboo Charcoal Wall Panel
Formaldehyde-free bamboo charcoal wall panels in 5mm and 8mm, 1220x1440mm. Bamboo powder wood fibre and recyclable PVC, waterproof and mildew proof interior panels.
See the specification
PS 3D Wall Panel
PS 3D wall panels in 150x12mm and 160x10mm, 2.9m length, polystyrene with woodgrain finish. Waterproof formaldehyde free fluted panels for TV walls and hotels.
See the specification
WPC Wall Panel Interior WW-IN16023
WW-IN16023 interior WPC wall panel, 160mm wide, 15mm deep, 2900mm long with a smooth wood veneer finish. Fluted wall panels for homes offices hotels and malls.
See the specificationGuides That Cover This Product
Where It Has Been Installed
Request UV Marble Sheet
Send the finished size, the quantity, the mounting and the destination market. A quotation and the full specification come back by email.