WPC wall panels, SPC and LVT flooring and laminated bed slats, made in China Mon-Sun 09:00-17:00 GMT+8 [email protected] +86 156 6841 8983
  1. Home
  2. Products
  3. Indoor WPC Wall Panel
  4. WPC Wall Panel Interior WW-IN16023
Fluted interior WPC wall panels stacked in grey and wood finishes showing the hollow profile
Indoor WPC Wall Panel · Wall Panels

WPC Wall Panel Interior WW-IN16023

WW-IN16023 interior WPC wall panel, 160mm wide, 15mm deep, 2900mm long with a smooth wood veneer finish. Fluted wall panels for homes offices hotels and malls.

Width: 160mmLength: 2900mmMaterial: Wood plastic composite
WPC interior wall panel WW-IN16023 showing the 160mm fluted profile

Product Overview

WW-IN16023 is a fluted interior WPC wall panel, 160mm wide and 15mm deep in 2900mm lengths, finished with a smooth wood veneer surface. It brings the warmth of timber panelling to living rooms, bedrooms, offices, malls and hotels while keeping the moisture tolerance and dimensional stability of a wood plastic composite, so the wall still looks straight and tight years after handover.

Key Benefits

  • 160mm module makes wall setting out simple and keeps cut pieces to a minimum
  • 2900mm length reaches standard ceiling heights without a horizontal joint
  • Smooth wood veneer finish reads as timber panelling, not as plastic
  • WPC body holds its shape where solid timber panelling would move
  • Works in both residential rooms and commercial interiors with the same detail

At A Glance

Family
Wall Panels
Category
Indoor WPC Wall Panel
Type
WPC Wall Panel Interior WW-IN16023
Width
160mm
Depth
15mm
Length
2900mm
Product Photographs

The Profile The Surface And The Finish Options

These are the manufacturer's own photographs of this product, reproduced as published: the section, the surface finish and the colour options that were photographed together. Nothing here is a rendering.

Who It Is For

  • Interior fit-out contractors and panel distributors who need a repeatable fluted wall system with one module, one length and a consistent veneer finish across a whole project.

Problems It Solves

  • Timber panelling that cups and opens at the joints after a heating season
  • Mixed panel widths on site that make setting out slow and wasteful
  • Horizontal joints spoiling a floor to ceiling panelled wall
  • Finishes that look different between the residential and commercial parts of one project

Application Scenarios

  • Living rooms and bedrooms
  • Kitchens and dining areas
  • Offices and meeting rooms
  • Shopping malls and showrooms
  • Hotel lobbies and corridors

Technical Features

  • Type: WPC Wall Panel Interior WW-IN16023.
  • Width: 160mm.
  • Depth: 15mm.
  • Length: 2900mm.
  • Surface: Smooth wood veneer finish.
  • Material: Wood plastic composite.
Specification

Published Specification

Every row below is reproduced from the manufacturer's published specification for this range. Rows shown in italics are figures the specification does not publish; those are confirmed in writing rather than estimated here.

TypeWPC Wall Panel Interior WW-IN16023
Width160mm
Depth15mm
Length2900mm
SurfaceSmooth wood veneer finish
MaterialWood plastic composite

Use Guide

  • Fix to a flat wall or timber batten grid, keep panel direction consistent, and close out corners and panel ends with matching trims.
  • Wipe clean with a damp cloth.

Quality Control

  • Width and depth gauged against the 160mm and 15mm profile
  • Length cut accuracy checked at 2900mm
  • Veneer finish colour matched batch to batch
  • Panels checked for bow and edge damage before bundling

Materials

  • Wood plastic composite body in the 160 x 15mm fluted section.
  • Smooth wood veneer surface applied to the face.
  • Matching trims and end profiles for corners and panel ends.

Manufacturing Process

  • ['Extrusion', 'A section that drifts mid-run turns into cutting waste and joints that will not close on site.', 'The wood flour and polymer compound is extruded through the profile die and pulled to the published section.']
  • ['Hot and cold pressing', 'A veneer that lifts at the edge shows up months after the wall is handed over.', 'The decor veneer is laminated to the panel face and bonded under hot then cold pressing.']
  • ['Inspection', 'A dimension checked after packing is a dimension checked too late.', 'Section, colour and surface are checked against the order spec during the run, not only at the end.']
  • ['Packing and loading', 'Edge damage in transit is the most common reason a panel order is rejected on arrival.', 'Boards are bundled, film wrapped or cartoned and palletised for container loading.']

Certification Standards

Production follows . Certificates are sent per product on request rather than posted publicly, because the documents a shipment needs depend on the destination market.

Customisation Options

  • Length cut to your ceiling height
  • Veneer colour selected from the available finishes
  • Matching trims and end profiles
  • OEM packaging and sample sets
Comparison

How It Compares With The Alternatives

A technical comparison against other ways of solving the same problem. Nothing here is a performance claim against a named competitor product.

Against the alternative materialAgainst PS fluted panels, the WPC body is heavier and more robust for commercial traffic areas. Against solid timber panelling, WW-IN16023 arrives pre-finished and does not need sanding, staining or sealing on site.
Against a panel sold without a published sectionThis product publishes 160mm. A supplier quoting a range name and a photograph is asking you to discover the section after the container arrives, which is where cutting waste and joints that will not close come from.
Against a quotation that does not state the materialThe blend here is published as Wood plastic composite. Two quotations cannot be compared until both state what is actually in the board.
Against the rest of this rangeSee the Indoor WPC Wall Panel page for what this range does that the others do not, and the related products below for the nearest alternatives.
Questions

WPC Wall Panel Interior WW-IN16023 Questions

What are the panel dimensions?
160mm wide, 15mm deep and 2900mm long.
Can the panel be cut shorter on site?
Yes, panels cut with standard tools. We can also cut to length before shipping to reduce site waste.
Is this the same panel as your other WW-IN codes?
No. Each WW-IN code is a different profile width and depth. This one is the 160 x 15mm fluted panel.
Where is this panel used?
Living rooms, bedrooms, kitchens, offices, malls and hotels.
Do you supply matching trims?
Yes. Tell us the corner and end conditions in your project and we will quote the trims with the panels.
How do I get a price?
Send the wall area or linear metres and the finish you want by WhatsApp or email.

Request WPC Wall Panel Interior WW-IN16023

Send the finished size, the quantity, the mounting and the destination market. A quotation and the full specification come back by email.