- Home
- All Products
All 17 Products
Every product this factory publishes, grouped by family, with nothing paginated and nothing held back. Heel guard grating, concrete cover grating, ditch grating, welded and press locked panels, and the ball joint stanchions and handrail that protect the edge of the platform they deck.
Heel Guard Grating
Narrow-slot grating for places where people walk in heels, wheels or walking aids.
Heel Guard Grating 30x2.5 Paving Slot Run
Narrow-slot heel guard panels on 30x2.5 bearing bar with 8x2 cross bar, hot-dip galvanized, set flush into stone or concrete paving.
See the specification
Heel Guard Grating 30x2.5 Framed Panel
Heel guard panel on 30x2.5 bearing bar with 8x2 cross bar, supplied fully framed and banded as a single drop-in unit, hot-dip galvanized.
See the specification
Heel Guard Grating 25x6 Stainless Steel
Stainless steel heel guard panel on 25x6 bearing bar with 6x6 cross bar, acid passivated, for washdown floors and visible interior runs.
See the specification
Heel Guard Grating 55x5 Stainless Steel
Heavy stainless heel guard panel on 55x5 bearing bar with an 8 mm round cross bar, acid passivated, where a heel-safe surface also has to take vehicles.
See the specificationConcrete Cover Grating
Hook-type steel covers that sit in a concrete kerb or pit and lift out for cleaning.
Concrete Cover Grating 30x2.5 Hook Type
Light-duty hook cover panel on 30x2.5 bearing bar with 8x2 cross bar, hot-dip galvanized, for chambers crossed by pedestrians and hand trolleys.
See the specification
Concrete Cover Grating 65x5 Heavy Duty
Heavy cover panel on 65x5 bearing bar with a 6 mm round cross bar, hot-dip galvanized, for chambers crossed by forklifts and light vehicles.
See the specification
Concrete Cover Grating 100x5 With Flat Cross Bar
The heaviest published cover section: 100x5 bearing bar with a 30x5 flat cross bar, hot-dip galvanized, for wide openings and vehicle loads.
See the specification
Concrete Cover Grating 100x5 Vehicle Duty Panel
100x5 bearing bar with 30x5 flat cross bar, built and banded as a stacked panel set for repeated openings along one trench run.
See the specificationPress Locked Grating
Grating assembled under pressure instead of welded, for a flush surface and a sharp square mesh.
Press Locked Grating 40x3 Stainless Steel
Stainless steel press locked panel on 40x3 bearing bar with a 10x2 cross bar, acid passivated, for platforms and visible runs with a flush top surface.
See the specification
Press Locked Grating 32x3 Carbon Steel
Hot-dip galvanized carbon steel press locked panel with 32x3 bearing bar and a matching 32x3 cross bar, giving a deep square mesh.
See the specification
Press Locked Grating 30x2 Stainless Steel
Light stainless press locked panel with matched 30x2 bearing and cross bars, acid passivated, for hygienic floors and light-duty visible decks.
See the specificationWelded Steel Grating
Pressure-welded carbon steel panels, the general-purpose structure for platforms and walkways.
Welded Steel Grating 30x2.5 With Flat Cross Bar
Pressure-welded carbon steel panel on 30x2.5 bearing bar with an 8x2 flat cross bar, hot-dip galvanized, for general platform, walkway and trench duty.
See the specification
Welded Steel Grating 32x3 With Round Cross Bar
Pressure-welded carbon steel panel on 32x3 bearing bar with a 6 mm round cross bar, hot-dip galvanized, a step up in section from the 30x2.5 panel.
See the specificationDitch Steel Grating
Long, narrow panels built to cover a drainage ditch run, in galvanized carbon steel or passivated stainless.
Ditch Steel Grating 30x5 Stainless Steel
Stainless steel ditch grating on 30x5 bearing bar with an 8 mm round cross bar, acid passivated, for interior floor channels that are washed down.
See the specification
Ditch Steel Grating 32x5 Carbon Steel
Hot-dip galvanized ditch grating on 32x5 bearing bar with a 6 mm round cross bar, for yard and roadway channels crossed by vehicles.
See the specificationStanchion And Handrail
Ball joint stanchion posts and handrail tube, the edge protection that goes around the grating.
Ball Joint Stanchion With Handrail
Hot-dip galvanized ball joint stanchion system: 48 x 3.25 mm post, 76 x 3 mm drilled ball and 42.3 x 3.25 mm handrail tube, with a 6 mm base plate.
See the specification
Ball Joint Stanchion Post
The stanchion post on its own: 48 x 3.25 mm tube with a 76 x 3 mm drilled ball and a 6 mm base plate, hot-dip galvanized, supplied without rail.
See the specificationLooking For A Section That Is Not Listed Here
This page is the complete published range, but almost nothing that leaves this workshop is a stock panel. Send the opening as measured, a photograph of the frame and what crosses it, and the panel is modelled, drawn and built to that. Bar section, pitch, panel size, hooks, framing and surface treatment are all customisable, and small batches are normal.
Not Sure Which Section Fits
Send the opening as measured, what crosses it and the environment. A shortlist comes back with the matching bar sections.