Welded Steel Grating
Pressure-welded carbon steel panels, the general-purpose structure for platforms and walkways.
Every Welded Steel Grating We Publish
Welded steel grating is the workhorse: bearing bars set on pitch, cross bars pressure welded across them, the whole panel hot-dip galvanized. It carries the loads, it drains, it is the cheapest structure per square metre, and it is what most platforms, walkways and trench covers are actually made of. ShengJingYe produces it on an automatic pressure welding line in 30x2.5 and 32x3 bearing bar, with flat or round cross bar.
Welded Steel Grating 30x2.5 With Flat Cross Bar
Pressure-welded carbon steel panel on 30x2.5 bearing bar with an 8x2 flat cross bar, hot-dip galvanized, for general platform, walkway and trench duty.
See the specification
Welded Steel Grating 32x3 With Round Cross Bar
Pressure-welded carbon steel panel on 32x3 bearing bar with a 6 mm round cross bar, hot-dip galvanized, a step up in section from the 30x2.5 panel.
See the specificationProblems This Family Solves
- Panels delivered out of square so a run of them will not line up on the steelwork
- Cross bar welds that break loose under vibration and let the mesh open up
- Galvanizing applied before fabrication, leaving cut ends bare
- Long lead times on quantities that are too small for a big mill to be interested in
- Panels sized to a standard sheet and then cut on site, which wastes both steel and time
Who It Is For
- Steel fabricators building platforms, walkways and mezzanines
- Process plant and refinery contractors
- Warehouse and logistics fit-out contractors
- Trading companies supplying grating into construction projects
How This Family Actually Looks
Photographs taken by the factory of products in this family, lit and in production. Nothing here is a rendering of something that does not exist.
Why Buyers Choose This Range
- Produced on an automatic pressure welding line rather than by hand-tacking
- 30x2.5 with 8x2 flat cross bar, or 32x3 with a 6 mm round cross bar
- Hot-dip galvanized after cutting and banding
- Panels made to the finished size, banded, and marked for their position
- Small batch and customized runs accepted
Typical Application Scenarios
- Access platforms and maintenance walkways
- Mezzanine and racking decks that need to drain or pass light
- Trench and pit covers in yards
- Stair treads and landings
Where This Family Has Been Photographed
An Access Platform Package With Ball Joint Handrail
A platform package where the deck grating and the edge protection had to arrive together, in one finish, with base plates already drilled to the steelwork underneath.
Read what was specified
A Yard Trench Run Covered In Galvanized Grating
A long channel crossing a route that vehicles use, where a continuous run of covers has to sit flush with the concrete and still be liftable for clearing grit out of the channel.
Read what was specifiedWelded Steel Grating Questions
What is the difference between the 8x2 and the round cross bar?
Are the panels serrated?
How are panels packed for export?
Can you work from our steelwork drawings?
Do you supply aluminium grating?
Get The Welded Steel Grating Specifications
Tell us which products you are shortlisting and the specifications come back by email, with packing and a schedule for your quantity.