Ditch Steel Grating
Long, narrow panels built to cover a drainage ditch run, in galvanized carbon steel or passivated stainless.
Every Ditch Steel Grating We Publish
A ditch grating is not a square panel cut down. It is a long, narrow panel whose bearing bar runs across the channel, whose length is set by what one person can lift, and whose edges have to sit in a frame that was cast, not machined. ShengJingYe produces these in stainless steel 30x5 with acid passivation for interior and washdown floors, and in hot-dip galvanized carbon steel 32x5 for yards and roadways.
Ditch Steel Grating 30x5 Stainless Steel
Stainless steel ditch grating on 30x5 bearing bar with an 8 mm round cross bar, acid passivated, for interior floor channels that are washed down.
See the specification
Ditch Steel Grating 32x5 Carbon Steel
Hot-dip galvanized ditch grating on 32x5 bearing bar with a 6 mm round cross bar, for yard and roadway channels crossed by vehicles.
See the specificationProblems This Family Solves
- Channel runs covered with panels of random lengths left over from another job
- Grating that lifts under a passing wheel because nothing holds it down
- Corroded panels in a washdown area where carbon steel should never have been used
- Trench covers that trap dirt and cannot be lifted for cleaning
- Site-cut panels with bare, rusting cut ends
Who It Is For
- Drainage contractors and channel system suppliers
- Food and beverage plants with floor channels along production lines
- Yard and hardstanding contractors
- Facility maintenance teams replacing failed trench covers
How This Family Actually Looks
Photographs taken by the factory of products in this family, lit and in production. Nothing here is a rendering of something that does not exist.
Why Buyers Choose This Range
- Panel length set for handling and cleaning, not by a standard sheet size
- Stainless steel 30x5 acid passivated, or carbon steel 32x5 hot-dip galvanized
- Round 8 mm and 6 mm cross bar options depending on the structure
- Frames, end plates and hold-downs fabricated with the run
- Made to the channel as built, from your dimensions
Typical Application Scenarios
- Floor drainage channels in food and beverage production
- Yard and loading bay drainage crossing vehicle routes
- Car park and ramp drainage runs
- Wash bays and vehicle cleaning areas
Where This Family Has Been Photographed
Stainless Channel Covers In A Finished Floor
An interior floor channel where the covers are lifted for cleaning, the floor is washed down, and the slab left very little depth for the grating.
Read what was specifiedA Yard Trench Run Covered In Galvanized Grating
A long channel crossing a route that vehicles use, where a continuous run of covers has to sit flush with the concrete and still be liftable for clearing grit out of the channel.
Read what was specifiedDitch Steel Grating Questions
What length should the panels be?
Stainless or galvanized for a food plant?
Can the panels be locked down?
Will the panels fit a channel we already cast?
Do you make matching gully and sump covers?
Get The Ditch Steel Grating Specifications
Tell us which products you are shortlisting and the specifications come back by email, with packing and a schedule for your quantity.