- Home
- Products
- Heel Guard Grating
- Heel Guard Grating 30x2.5 Framed Panel
Heel Guard Grating 30x2.5 Framed Panel
Heel guard panel on 30x2.5 bearing bar with 8x2 cross bar, supplied fully framed and banded as a single drop-in unit, hot-dip galvanized.
Product Overview
Same heel guard section as the paving slot run, supplied a different way: as a complete framed panel rather than as lengths cut into a continuous channel. That suits an isolated opening, a pit lid, a doorway threshold or a replacement for one failed panel in an existing run, where what you want delivered is a finished unit that drops in and sits flat, not material to be fitted. The frame is banded on and galvanized with the panel, so there is no bare steel anywhere on the finished piece.
Key Benefits
- Delivered as a finished drop-in unit rather than as material to fit
- Frame banded on and galvanized with the panel, so no bare steel at the edge
- Heel-safe bar pitch on a section shallow enough for a threshold
- Ideal for replacing one failed panel without disturbing a run
At A Glance
- Family
- Heel Guard Grating
- Category
- Heel Guard Grating
- Material
- Carbon Steel
- Bearing bar
- 30 x 2.5 mm
- Cross bar
- 8 x 2 mm
- Surface treatment
- Hot-dip Galvanizing
What It Looks Like
Photographs of this product taken by the factory, lit and in production. Nothing here is a rendering of a product that does not exist yet.
Who It Is For
- Fit-out contractors working on single openings
- Facility teams replacing a damaged panel
- Shopfitters and hospitality refurbishment contractors
- Drainage suppliers shipping a complete assembly to site
Problems It Solves
- Buying a full channel run when one framed panel is what is needed
- Site-made frames that do not sit flat and are never galvanized
- Replacement panels that do not match the pitch of the existing run
- Bare cut edges rusting at a doorway in the first winter
Application Scenarios
- Isolated thresholds and doorway drainage openings
- Single pit and chamber lids in pedestrian areas
- Replacement of one damaged panel in an existing heel guard run
- Small drainage openings in retail and hospitality fit-outs
Technical Features
- Bearing bar 30 x 2.5 mm carbon steel
- Cross bar 8 x 2 mm flat
- Frame and banding fabricated before galvanizing
- Hot-dip galvanized as a complete assembly
- Made to the opening as measured on site
Published Specification
Every row below is reproduced from the manufacturer's published specification for this range. Rows shown in italics are figures the specification does not publish; those are confirmed in writing rather than estimated here.
| Material | Carbon Steel |
| Bearing bar | 30 x 2.5 mm |
| Cross bar | 8 x 2 mm |
| Surface treatment | Hot-dip Galvanizing |
| Structure | Heel Guard Grating |
| Panel size | Made to your drawing |
| Place of production | Yantai, Shandong Province, China |
| Brand | ShengJingYe |
| Minimum order quantity | Small batch accepted |
| Load class | TBC, confirmed in writing against your loading |
| Lead time | Confirmed in writing per order, not published |
Use Guide
- Measure the opening as built and allow clearance for the galvanized coating thickness
- Bed the frame level before the panel arrives
- Match the slot orientation to the walking direction when replacing part of a run
- Lift with the provision supplied rather than with a screwdriver at the edge
- Keep the old panel until the new one is seated, in case the opening has moved
Quality Control
- Panel offered into its own frame before galvanizing
- Clearance checked so the panel still drops in after coating
- Slot width gauged across the panel
- Finished assembly checked for rock and flatness
Materials
- Carbon steel bearing bar and cross bar
- Zinc coating applied by hot-dip galvanizing
Manufacturing Process
- Drawing and 3D model
- Cutting and stamping
- Pressure welding or press locking
- Framing and fabrication
- Surface treatment
- Inspection and packing
Certification Standards
Production follows TBC, the source specification publishes no certification marks. Certificates are sent per product on request rather than posted publicly, because the documents a shipment needs depend on the destination market.
Customisation Options
- Frame type: angle, flat bar or purpose-made section
- Fixing lugs cast or bolted into the surround
- Lifting provision for a flush finished surface
- Stainless steel version for interior finished floors
How It Compares With The Alternatives
A technical comparison against other ways of solving the same problem. Nothing here is a performance claim against a named competitor product.
| Against a stock panel cut to fit on site | A stock panel trimmed on site loses its banding, its bar pitch at the edge and its coating at every cut. This one is drawn to the opening and coated after it is fabricated. |
| Against buying the panel and its frame separately | Panel, banding, hooks, frame and handrail are fabricated and coated in the same plant and the same batch, which is what makes them fit each other. |
| Against another family in this range | See the Heel Guard Grating page for what this family does that the others do not, and the related products below for the nearest alternatives. |
Heel Guard Grating 30x2.5 Framed Panel Questions
What is the difference between this and the paving slot run?
Can you match the pitch of grating we already have?
Is the frame included in the price?
Can this be made in stainless steel?
Products Buyers Shortlist Alongside This One
Heel Guard Grating 30x2.5 Paving Slot Run
Narrow-slot heel guard panels on 30x2.5 bearing bar with 8x2 cross bar, hot-dip galvanized, set flush into stone or concrete paving.
See the specification
Heel Guard Grating 25x6 Stainless Steel
Stainless steel heel guard panel on 25x6 bearing bar with 6x6 cross bar, acid passivated, for washdown floors and visible interior runs.
See the specification
Heel Guard Grating 55x5 Stainless Steel
Heavy stainless heel guard panel on 55x5 bearing bar with an 8 mm round cross bar, acid passivated, where a heel-safe surface also has to take vehicles.
See the specificationGuides That Cover This Product
Who Buys It
Where It Has Been Installed
Request Heel Guard Grating 30x2.5 Framed Panel
Send the finished size, the quantity, the mounting and the destination market. A quotation and the full specification come back by email.