Bulk Powder Tanker Trailer V Shape 52 Cubic Meter Tri-axle Cement Tank Truck
52 cubic metre V shape cement tanker, 10500*2500*3950mm, 80T payload with BOHAI compressor.
View SpecificationCement Tank Trailer
Powder Tanker Three Axles 45 Square Bulk Cement Tank Semi-Trailer for Sale
45 cubic metre cement powder tanker, 11800*2500*3700mm, 55 tonne capacity and 65 tonne total.
Overview
What This Trailer Is Built For
A 45 cubic metre bulk cement tanker at 11800mm*2500mm*3700mm, 10 tonnes tare, 55 tonnes loading capacity and 65 tonnes total weight. That 55 tonne figure is the highest payload in the powder range, which makes it the choice where the material is dense and the road allows the weight. Axles are three square-section 13 tonne FUWA units, the kingpin is a 2.00 inch 50# bolting type, and an electrical system and toolbox measuring 1.2 x 0.5 x 0.5m are fitted. ABS is part of the listed specification.
Key Benefits
What You Get
- 55 tonne loading capacity is the highest in the powder tanker range
- 45 cubic metres balances volume and payload for cement and mineral powder
- Square-section 13 tonne FUWA axles resist the torsion of a pressurised tank
- ABS is part of the listed specification on this model
- 10 tonne tare on a 65 tonne total keeps the payload ratio high
Problems Solved
What It Fixes
- Smaller powder tankers cap payload well below what the road allows
- Low-capacity tankers force extra trips on high-volume cement contracts
- Round axle sections twist under a pressurised tank
- Trailers without ABS are refused registration in a growing number of markets
Who It Is For
Operators Who Buy This Model
- Cement producers and large distributors
- Concrete batching plant operators
- Bulk powder hauliers on high-limit routes
- Operators moving dense mineral powders
Application Scenarios
Where It Works
- High-volume cement delivery to batching plants
- Mineral powder supply to processing plants
- Coal ash haulage on routes that permit high gross weight
- Long-haul bulk powder distribution
Technical Features
Build Specification
- Bulk cement tanker semi-trailer for cement, coal ash and mineral powder
- Dimension 11800*2500*3700mm, final dimensions per approved design drawings
- Tare weight 10T, loading capacity 55T, total weight 65T
- Three square axles with 13 tonne capacity, FUWA brand
- Kingpin 2.00 inch 50# bolting type
- ABS system and electrical system fitted
- Toolbox 1.2m x 0.5m x 0.5m
Specifications
Manufacturer Data Sheet
| Type | Bulk cement tanker semi trailer Usage: Transport bulk cement, coal ash, mineral powder,etc |
|---|---|
| Tare Weight | 10 T |
| Loading Capacity | 55 T |
| Total Weight | 65 T |
| Dimensions | Dimension 11800*2500*3700mm (The final dimensions depend on the final design drawings) |
| Engine | Diesel |
| Axle | 3 axles *square axle with 13 tons capacity, FUWA brand (Chinese best brand) |
| King Pin | 2.00’’(50#) bolting |
Figures are taken from the SINOHENG data sheet for this model. Final dimensions and weights are confirmed on the approved order drawing.
Quality Control
Checks Before Dispatch
- Tank pressure and leak test through the full working cycle
- Discharge and fluidising system function check
- ABS sensor and modulator function test
- Weld inspection on the tank shell and chassis mountings
Customization
What You Can Change
- Tank volume set to your material density
- Compressor size matched to your silo connection
- Axle rating and brand chosen to local service support
- Discharge outlet arrangement specified at order
- Kingpin size changed to your tractor fifth wheel
Comparison
How It Compares
| Compared With | How This Model Differs |
|---|---|
| 35 square powder tanker | 45 cubic metres and 55 tonnes carry more per trip where the road permits; the smaller tank suits tighter axle limits. |
| 52cbm V shape tanker | The V shape empties sticky material more cleanly; this build carries a higher rated payload. |
| Two-axle powder tanker | Three axles carry 55 tonnes legally; two axles are capped nearer 33 tonnes. |
Use Guide
Operating This Trailer
- Confirm your route gross weight limit before relying on the 55 tonne rating
- Match compressor output to the silo height at your delivery points
- Vent the tank fully before opening any manhole
- Check the ABS warning lamp at every coupling
- Clean the discharge line between different powder types
Related Products
Related Trailers
Powder Material Carrier Mobile Road Tanker Dry Bulk Cement Tank Truck Trailer
Two-axle dry bulk cement tanker, 9000x2500*3700mm, 33T capacity at 8T tare with FUWA square axles.
View Specification
High Quanlity Lime Coal Ash Powder Transport Tank Semi-trailer China Factory Direct Sales
Lime and coal ash powder tanker, 11000x2500*3800mm, 42 tonne capacity at 9 tonne tare.
View Specification
Flour Tanker Semi-trailer Bulk Cement Heavy Duty Silo Truck Trailer Ships Box Tractor Large
Flour and food-grade powder tanker, 11000x2500*3800mm, 60 tonne capacity at 9 tonne tare.
View SpecificationFAQ
Questions About This Model
What Is the Loading Capacity
55 tonnes within a 65 tonne total weight, against a 10 tonne tare. It is the highest payload in our powder tanker range.
What Is the Tank Volume
45 cubic metres on an 11800 x 2500 x 3700mm chassis.
Does It Include ABS
Yes, an ABS system is part of the listed specification for this model.
What Materials Can It Carry
Bulk cement, coal ash, mineral powder and similar dry powders.
Why Square Section Axles
They resist the torsion that a pressurised tank body puts into the chassis better than round sections.
Can the Volume Be Increased
Yes. Tell us your material density and axle limits and we will size the tank to suit.
How Long Is the Lead Time
About 45 days for a customized build, or around 10 days from stock where a unit is available.
Get A Price For The Powder Configuration You Need
Send your country of use, cargo, load weight and axle limits. We confirm the configuration and quote FOB or CIF in one to three days.