Bulk Powder Tanker Trailer V Shape 52 Cubic Meter Tri-axle Cement Tank Truck
52 cubic metre V shape cement tanker, 10500*2500*3950mm, 80T payload with BOHAI compressor.
View SpecificationCement Tank Trailer
Flour Tanker Semi-trailer Bulk Cement Heavy Duty Silo Truck Trailer Ships Box Tractor Large
Flour and food-grade powder tanker, 11000x2500*3800mm, 60 tonne capacity at 9 tonne tare.
Overview
What This Trailer Is Built For
A pneumatic silo tanker set up for flour and other fine food-grade powders, 11000mm x 2500mm x 3800mm at 9 tonnes tare, 60 tonnes loading capacity and 70 tonnes total. Flour is a difficult cargo: it is light, it packs, and it must stay uncontaminated, so the tank interior finish and the discharge system matter as much as the capacity. The chassis carries three square-section 13 tonne FUWA axles, a 2.00 inch 50# bolting kingpin, 12R22.5 Triangle tires on 9.00-22.5 rims, and 13 wheels including a spare. The same tanker also handles cement, coal ash and mineral powder.
Key Benefits
What You Get
- Built for fine food-grade powders where tank interior condition matters, not just capacity
- 60 tonne loading capacity at 9 tonnes tare gives an excellent payload ratio
- Pneumatic discharge delivers straight into a mill or bakery silo with no handling
- Square-section 13 tonne FUWA axles resist the torsion of a pressurised tank
- 13 wheels including a spare for uninterrupted running
Problems Solved
What It Fixes
- Bagged flour handling is slow, dusty and adds packaging cost
- General powder tankers are not set up for food-grade cleanliness
- Light powders run out of volume before payload in a cement-sized tank
- Round axles twist under a pressurised tank body
Who It Is For
Operators Who Buy This Model
- Flour mills and food ingredient distributors
- Industrial bakeries receiving bulk flour
- Food manufacturing supply chains
- Hauliers with mixed food and industrial powder contracts
Application Scenarios
Where It Works
- Flour delivery from mills to bakeries and food plants
- Bulk food-grade powder distribution
- Starch and additive transport for food manufacturing
- Cement and mineral powder work on the same chassis
Technical Features
Build Specification
- Flour tanker semi-trailer, also for bulk cement, coal ash and mineral powder
- Dimension 11000mm x 2500mm x 3800mm, final dimensions per approved design drawings
- Tare weight 9T, loading capacity 60T, total weight 70T
- Three square axles with 13 tonne capacity, FUWA brand
- Kingpin 2.00 inch 50# bolting type
- Tires 12R22.5 Triangle brand, rims 9.00-22.5
- 13 wheels including one spare
Specifications
Manufacturer Data Sheet
| Type | Flour tanker semi trailer Usage: Transport bulk cement, coal ash, mineral powder,etc |
|---|---|
| Tare Weight | 9 T |
| Loading Capacity | 60 T |
| Total Weight | 70 T |
| Dimensions | Dimension 11000x2500*3800mm (The final dimensions depend on the final design drawings) |
| Engine | Diesel |
| Axle | 3 axles *square axle with 13 tons capacity, FUWA brand (Chinese best brand) |
| King Pin | 2.00’’(50#) bolting |
| Tire | specs 12R22.5, Triangle brand (Chinese famous brand) |
| Rim | 9.00-22.5,(Chinese famous brand) Number of wheel 13 pieces(including one spare wheel) |
Figures are taken from the SINOHENG data sheet for this model. Final dimensions and weights are confirmed on the approved order drawing.
Quality Control
Checks Before Dispatch
- Tank interior finish inspection before closing
- Pressure and leak test on the completed tank
- Discharge and fluidising system function check
- Axle alignment and brake balance test
Customization
What You Can Change
- Tank interior finish specified for food-grade service
- Tank volume set to the density of your product
- Compressor size matched to the receiving silo
- Discharge outlet arrangement matched to your connections
- Axle rating and brand chosen to local service support
Comparison
How It Compares
| Compared With | How This Model Differs |
|---|---|
| General cement powder tanker | A flour build needs a clean tank interior and a discharge system suited to fine food powder; a cement tanker is not set up for that. |
| Bagged flour on a box trailer | Bulk pneumatic delivery removes packaging cost and manual handling entirely. |
| Smaller 33-42 tonne powder tanker | 60 tonnes carries far more per trip where the road allows; smaller tanks suit tighter weight limits. |
Use Guide
Operating This Trailer
- Keep the tank dedicated to food-grade product where possible
- Clean and dry the tank thoroughly before each food-grade load
- Match compressor output to the receiving silo height
- Vent fully before opening any manhole
- Check the spare wheel before each trip
Related Products
Related Trailers
Powder Material Carrier Mobile Road Tanker Dry Bulk Cement Tank Truck Trailer
Two-axle dry bulk cement tanker, 9000x2500*3700mm, 33T capacity at 8T tare with FUWA square axles.
View Specification
High Quanlity Lime Coal Ash Powder Transport Tank Semi-trailer China Factory Direct Sales
Lime and coal ash powder tanker, 11000x2500*3800mm, 42 tonne capacity at 9 tonne tare.
View Specification
Powder Tanker Three Axles 45 Square Bulk Cement Tank Semi-Trailer for Sale
45 cubic metre cement powder tanker, 11800*2500*3700mm, 55 tonne capacity and 65 tonne total.
View SpecificationFAQ
Questions About This Model
Can It Carry Flour and Cement
The same tanker handles flour, bulk cement, coal ash and mineral powder. For food-grade work we recommend keeping the tank dedicated to food product.
What Is the Loading Capacity
60 tonnes within a 70 tonne total weight, against a 9 tonne tare.
How Is the Product Discharged
Pneumatically, straight into a receiving silo. Match the compressor size to the silo height and pipe run at your delivery points.
Can the Tank Interior Be Specified for Food Use
Yes. Tell us that the tanker is for food-grade product and we will specify the interior finish accordingly.
What Axles Are Fitted
Three square-section 13 tonne FUWA axles, which resist the torsion of a pressurised tank.
Is a Spare Wheel Included
Yes, 13 wheels in total including one spare, in 12R22.5 Triangle brand on 9.00-22.5 rims.
What Is the Lead Time
Around 45 days for a customized build, confirmed when the design drawing is approved.
Get A Price For The Flour Configuration You Need
Send your country of use, cargo, load weight and axle limits. We confirm the configuration and quote FOB or CIF in one to three days.