Commercial Composter
CR-500 Waste Composting Machine
500 kg/day composting machine for industrial and municipal sites
CR-500 processes half a tonne of organic waste a day. At 24 kW on a 380 V three-phase supply and 1600 kg in a 3445 x 1874 x 1500 mm frame, it is built for sites where food waste arrives by trolley or tipper rather than by bucket. Microbial decomposition reduces at least 85% of the incoming volume and returns organic fertilizer within 12 to 24 hours.
No forms. Message us on WhatsApp or by email and you will be talking to the factory in Suzhou.
What it solves
- Half a tonne a day of organics leaving site as landfill tonnage
- Municipal programmes needing local processing instead of long haulage
- Food manufacturers with predictable daily reject volumes
- Large resort and catering operations with several outlets
Key benefits
- 500 kg/day processing capacity
- 12-24 hour microbial cycle producing organic fertilizer
- At least 85% waste volume reduction
- 380 V, 50 Hz three-phase at 24 kW
- Internal deodorisation with optional external deodoriser
- Q235 with spray paint and stainless steel construction
- 1600 kg, 3445 x 1874 x 1500 mm
Technical data
| Model | CR-500 |
|---|---|
| Processing Capacity | 500kgs/day |
| Dimension (L*W*H) | 3445*1874*1500mm |
| Weight | 1600kgs |
| Rated Power | 24KW |
| Power Supply | 380V, 50Hz |
| Decomposition Method | Microbial Decomposition |
| Waste Volume Reduction | ≥85% |
| Processing Time | 12-24 Hours |
| Output | Organic Fertilizer |
| Material | Q235 + Spray Paint + Stainless Steel |
| Deodorization | Internal deodorizationr or optional extra deodoriser |
| Control System | Fully Automatic Intelligent Control, Automatic Fault Alarm |
Technical features
- Microbial decomposition with continuous gap stirring
- Internal deodorisation, optional extra deodoriser
- Fully automatic intelligent control with automatic fault alarm
- Q235 with spray paint and stainless steel construction
- Indoor ventilated installation or sheltered outdoor installation
- 380 V, 50 Hz, 24 kW
Who it is for
Industrial, municipal and large hospitality operators processing around half a tonne of organic waste a day who want it handled locally.
Where it is used
- Municipal and district organics processing points
- Food and beverage manufacturing sites
- Large resorts, stadiums and event venues
- Agricultural operations handling market and packing waste
Quality control
Fabrication, drive alignment and cabinet wiring are inspected stage by stage, followed by a loaded factory run. Project documentation, lifting plan and commissioning checklist ship with the machine.
Customisation
Input handling - tipper, conveyor or manual - deodorisation level, voltage and control language are specified per project. Shredding and separation equipment can be integrated upstream.
How it is operated
- Prepare a level pad indoors or under shelter with access for tipping
- Connect three-phase power and complete commissioning with the microbial charge
- Load waste through the operating day up to 500 kg
- Automatic decomposition runs for 12-24 hours
- Remove organic fertilizer on the agreed schedule
- Maintain drive, seals and deodorisation on the service plan
How it compares
CR-500 is the middle of the three-phase range. CR-300 is a smaller frame at 16 kW; CR-1000 doubles throughput at 35 kW with a 2200 kg frame. Above 1000 kg/day the range moves into the industrial CR-2000 to CR-10T systems.
Frequently asked questions
How is waste loaded at this capacity?
Typically by trolley or tipper. Feeding arrangements including conveyors are configured at project stage.
What supply is required?
380 V, 50 Hz three phase at 24 kW rated power.
Can CR-500 run outdoors?
Yes, under a shelter. Indoors it requires normal temperature and ventilation.
What volume reduction is achievable?
At least 85%, with the remainder discharged as organic fertilizer.
Is upstream shredding needed?
It depends on input. Bulky or packaged waste benefits from shredding or separation ahead of the composter, which we can integrate.
How long is installation?
Site preparation, positioning with lifting equipment, power connection and commissioning - the schedule is confirmed with the project quotation.
What is the compost used for?
Grounds maintenance, landscaping and agricultural application, blended at the recommended ratio.
Quote for the CR-500 Waste Composting Machine
Tell us your daily waste volume, power supply and destination port. We reply with a specification and price.