Commercial Composter
CR-300 Food Waste Recycling Machine
300 kg/day recycling machine for campuses and food producers
CR-300 handles 300 kg of food waste a day on a 380 V three-phase supply at 16 kW, converting it to organic fertilizer through microbial decomposition in 12 to 24 hours with at least 85% volume reduction. The frame measures 3045 x 1874 x 1500 mm and weighs 1400 kg - a fixed installation for a waste yard or plant area rather than a machine that moves around the site.
No forms. Message us on WhatsApp or by email and you will be talking to the factory in Suzhou.
What it solves
- Food producers with a steady daily organic waste stream
- Campuses consolidating catering waste from several buildings
- Municipal collection points handling household organics
- Rising gate fees and haulage costs on wet waste
Key benefits
- 300 kg/day processing capacity
- Organic fertilizer output in a 12-24 hour cycle
- At least 85% waste volume reduction
- 380 V, 50 Hz three-phase at 16 kW
- Internal deodorisation with optional external deodoriser
- Q235 with spray paint and stainless steel construction
- 1400 kg, 3045 x 1874 x 1500 mm
Technical data
| Model | CR-300 |
|---|---|
| Processing Capacity | 300kgs/day |
| Dimension (L*W*H) | 3045*1874*1500mm |
| Weight | 1400kgs |
| Rated Power | 16KW |
| Power Supply | 380V, 50Hz |
| Decomposition Method | Microbial Decomposition |
| Waste Volume Reduction | ≥85% |
| Processing Time | 12-24 Hours |
| Output | Organic Fertilizer |
| Material | Q235 + Spray Paint + Stainless Steel |
| Deodorization | Internal deodorizationr or optional extra deodoriser |
| Control System | Fully Automatic Intelligent Control, Automatic Fault Alarm |
Technical features
- Microbial decomposition with automatic stirring regime
- Internal deodorisation, optional extra deodoriser
- Fully automatic intelligent control with automatic fault alarm
- Q235 with spray paint and stainless steel construction
- Indoor ventilated installation or outdoor under shelter
- 380 V, 50 Hz, 16 kW
Who it is for
Operators with a dedicated waste area, three-phase power and roughly 300 kg of organic waste a day looking to stop paying to haul water.
Where it is used
- Food processing plants handling trim and reject product
- University campuses and large hospital sites
- Municipal and community organics collection points
- Resorts and large hospitality complexes
Quality control
Frames are fabricated and inspected in-house, the control cabinet is wired and tested to the project specification, and each machine completes a loaded run before crating. Commissioning support covers the first charge of microbial medium.
Customisation
Feeding configuration, deodorisation level, supply voltage and control language are set per project. Where input carries significant oil or water, the CRO-300S separator is quoted as pre-treatment.
How it is operated
- Prepare a level indoor area or a sheltered outdoor pad
- Connect 380 V three-phase power and commission the microbial charge
- Load waste through the day up to 300 kg
- The automatic cycle runs decomposition over 12-24 hours
- Remove organic fertilizer on the agreed interval
- Follow the scheduled service intervals for drive and deodorisation
How it compares
CR-300 sits between CR-200 and CR-500 on the same three-phase platform: 100 kg/day more than CR-200 for 3 kW more power, and a 400 mm longer frame. Above CR-500, CR-1000 doubles capacity again.
Frequently asked questions
What kind of site is CR-300 designed for?
Sites with a dedicated waste area and three-phase power - food producers, campuses, municipal collection points and large hospitality complexes.
How much power does it draw?
16 kW rated power on a 380 V, 50 Hz three-phase supply.
Does it need a building?
It can be installed indoors at normal temperature with ventilation, or outdoors provided a shelter is built.
How long does the process take?
12 to 24 hours per cycle, producing organic fertilizer.
What if the waste is very wet or oily?
We quote the CRO-300S separator as pre-treatment so the composter receives separated, dewatered solids.
How is the machine transported?
It ships crated for container transport; at 1400 kg it is positioned with lifting equipment on site.
What support comes with commissioning?
Installation guidance, the first microbial charge and operator handover are covered in the commissioning package.
Quote for the CR-300 Food Waste Recycling Machine
Tell us your daily waste volume, power supply and destination port. We reply with a specification and price.