80 L/min
Chemical Liquid Medicine Filter
Glandless circulation filter that keeps a plating or electroforming bath clean while it runs.
Electroplating Equipment for Jewelry
Solution cleanliness is not a housekeeping issue in a plating shop, it is a specification issue. This is the circulating filtration side of the plating line.
1 machines
The Range
Bath filtration that keeps plating thickness, brightness and adhesion inside specification.
Who buys this
Who This Equipment Is For
Plating shops fighting adhesion failures
Fine particles and sludge in the bath show up as pinholes, dull patches and poor adhesion long before anyone decides the bath is spent.
Electroforming operations
Where the same solution has to stay uniform over a cycle measured in hours, not minutes.
Chemical and pure water systems
The same filter body is specified for chemical liquid clarification and pure water duty.
Why this equipment
What Decides The Choice
Zero-leakage pump
A glandless structure with no shaft seal, so there is no slow loss of a bath that has dissolved gold in it.
80 L/min over 1 cbm of area
Four 20 inch elements, enough area to pull particulate continuously without throttling circulation.
PP, PVDF or acrylic
Matched to temperature and chemistry: 70 C on PP, 60 C on the transparent acrylic build.
Carbon option for organics
Activated carbon in the filter bag with secondary filtration through the element, for contamination particulate filtration will not touch.
Where it is used
Industries Running These Machines
Electroplating And Surface Finishing
Bath cleanliness, drag-out recovery and de-plating for plants running precious metal baths.
Jewelry Manufacturing
Electroforming, plating, acid finishing and scrap recovery for factories making gold and silver pieces.
FAQ
About Electroplating Equipment for Jewelry
How many machines are in Electroplating Equipment for Jewelry?
1: Chemical Liquid Medicine Filter.
Are these standard products or made to order?
Both. Every machine has a published standard specification, and size, capacity and function are customisable on request.
What is the lead time?
Normally 7 to 15 working days after order confirmation. Customised machines may take longer depending on complexity.
Specify A Machine From Electroplating Equipment for Jewelry
Send the feed material, the daily volume and the floor space available and we will come back with a size, a capacity and a power requirement.