Rubber Pad 18
Lattice right to the edge, with no plain margin — visually the most aggressive face in this range and the one that needs the cleanest tool parting line.
Specification
| Part family | Moulded rubber part |
|---|---|
| Construction | Single-compound moulding, no metal insert |
| Face detail | Square pad with a fine diamond lattice running edge to edge. |
| Moulding compounds | EPDM, SBR, TPE, TPE-SEBS, PVC or PP, to drawing |
| Tooling | Designed and built in house |
| Prototype parts | 4 weeks from prototype tool |
| PPAP | Typically 8 weeks, to ISO/TS 16949 or VDA |
| Dimensions | Built to customer drawing or to a supplied sample |
| Moulded from | Beijing rubber plant (rubber) / Shanghai plant (plastics) |
The face on this part
Square pad with a fine diamond lattice running edge to edge. It sits in the Standard Rubber & Plastic Pads group, and the photograph above is of the part itself rather than a rendering — what you see is the tread, the outline and the finish as they leave the tool.
With no metal face, the compound is the part
There is nothing to hide behind. A pad that is too hard makes its tread pattern useless; one that is too soft wears through at the rib tips. Send the service conditions and our designers will propose a grade rather than asking you to guess one.
How the compound is proven
Shore A hardness, density, ozone, ageing, tensile strength, elongation to fracture, vulcanization and insulation resistivity, oil resistance and Mooney viscosity — all run in the Beijing facility, next to the press rather than a week away.
Tooling and first parts
All tooling is designed and made in house. Parts from a prototype tool reach you in 4 weeks, which is the window in which the face, the retention and the hardness can still be changed without restarting anything.
Other parts in Standard Rubber & Plastic Pads
VW Pad 01
Standard Rubber & Plastic Pads
VW Pad 02
Standard Rubber & Plastic Pads
Rubber Pad 1
Standard Rubber & Plastic Pads
Rubber Pad 2
Standard Rubber & Plastic Pads
Rubber Pad 3
Standard Rubber & Plastic Pads
Rubber Pad 4
Standard Rubber & Plastic Pads
Rubber Pad 5
Standard Rubber & Plastic Pads
Rubber Pad 6
Standard Rubber & Plastic PadsBackground reading
Choosing a Pedal Pad Compound: EPDM, SBR, TPE and When Each One Fails
Service conditions, not price, should pick the compound. Here is how we narrow it down and what we test to prove the choice.
Ribs, Lattices, Studs and Slots: What Each Pedal Tread Is For
Four tread families appear across this catalogue. Each one is a different answer to the same question about grip and wear.
How to Get a Pedal Pad Quoted: Send a Drawing, or Send the Part
What we need to price a part, what we can work out ourselves, and what genuinely cannot be guessed.
Questions buyers ask
Which compound will this part be moulded in?
Whichever the drawing calls for. We run EPDM, SBR, TPE, TPE-SEBS, PVC and PP with or without glass reinforcement; if you have not fixed a compound yet, send the service conditions and we will propose one.
How long before I see a real Rubber Pad 18 sample?
All tooling is designed and made in house, and we deliver parts from a prototype tool in 4 weeks. Full PPAP to ISO/TS 16949 or VDA typically takes a further 8 weeks.
What do you need from us to quote it?
Send the sample if you have no drawing. We will measure it, model it and come back with a drawing for your approval before anything is cut.
How is the material verified?
Our production facilities in Beijing, Shanghai and Wuhan are ISO/TS certified, and the rubber test equipment sits next to the Beijing production line so a bad batch is stopped, not diagnosed later.
Quote the Rubber Pad 18
Send the annual volume and, if you have one, the drawing. Prototype parts follow 4 weeks after a prototype tool.