Rubber Pad 12
Almost plain. Pads like this rely on compound rather than pattern for grip, so the Shore A hardness on the drawing matters more here than anywhere else in this range.
Specification
| Part family | Moulded rubber part |
|---|---|
| Construction | Single-compound moulding, no metal insert |
| Face detail | Rounded rectangular pad, mostly plain face with a small raised step. |
| Moulding compounds | EPDM, SBR, TPE, TPE-SEBS, PVC or PP, to drawing |
| Tooling | Designed and built in house |
| Prototype parts | 4 weeks from prototype tool |
| PPAP | Typically 8 weeks, to ISO/TS 16949 or VDA |
| Dimensions | Built to customer drawing or to a supplied sample |
| Moulded from | Beijing rubber plant (rubber) / Shanghai plant (plastics) |
The face on this part
Rounded rectangular pad, mostly plain face with a small raised step. It sits in the Standard Rubber & Plastic Pads group, and the photograph above is of the part itself rather than a rendering — what you see is the tread, the outline and the finish as they leave the tool.
What we need to quote it
The drawing or the sample, the annual volume, and the service conditions the part sees. If the part already exists in this catalogue we will tell you that instead of quoting a new tool.
Where it is moulded
Rubber parts are moulded at our Beijing plant in Lucheng, HuangCun Town, Daxing; plastic parts at the Shanghai plant on Huqingping Road, Qingpu District, which is also home to our R&D centre.
One compound, one tool, one shot
The tread, the retaining geometry and any mounting holes or locating tabs are all formed in the tool rather than added afterwards. That is why the tool drawing and the part drawing are effectively the same document, and why a change to the face means a change to the tool.
Other parts in Standard Rubber & Plastic Pads
VW Pad 01
Standard Rubber & Plastic Pads
VW Pad 02
Standard Rubber & Plastic Pads
Rubber Pad 1
Standard Rubber & Plastic Pads
Rubber Pad 2
Standard Rubber & Plastic Pads
Rubber Pad 3
Standard Rubber & Plastic Pads
Rubber Pad 4
Standard Rubber & Plastic Pads
Rubber Pad 5
Standard Rubber & Plastic Pads
Rubber Pad 6
Standard Rubber & Plastic PadsBackground reading
Choosing a Pedal Pad Compound: EPDM, SBR, TPE and When Each One Fails
Service conditions, not price, should pick the compound. Here is how we narrow it down and what we test to prove the choice.
Ribs, Lattices, Studs and Slots: What Each Pedal Tread Is For
Four tread families appear across this catalogue. Each one is a different answer to the same question about grip and wear.
How to Get a Pedal Pad Quoted: Send a Drawing, or Send the Part
What we need to price a part, what we can work out ourselves, and what genuinely cannot be guessed.
Questions buyers ask
Which compound will this part be moulded in?
Whichever the drawing calls for. We run EPDM, SBR, TPE, TPE-SEBS, PVC and PP with or without glass reinforcement; if you have not fixed a compound yet, send the service conditions and we will propose one.
How long before I see a real Rubber Pad 12 sample?
Samples follow the prototype tool by 4 weeks. If the part is already tooled here, as most parts in this catalogue are, existing samples can go out far sooner.
What do you need from us to quote it?
The part, the annual volume, and the service conditions it sees. Compound and hardness we can propose; volume and duty we cannot guess.
How is the material verified?
Tensile strength and elongation to fracture catch under-cure; oil resistance catches EPDM specified where NBR was needed. All of it runs in the Beijing facility next to the line.
Quote the Rubber Pad 12
Send the annual volume and, if you have one, the drawing. Prototype parts follow 4 weeks after a prototype tool.