Hydraulic Pressure Welders
CHY400 Hydraulic Cold Welder for 8.0 mm Copper Rod
Rectangular strip as well as round wire, copper to 8.00 mm and aluminium to 15.00 mm on a 660 kg frame.
View specifications
CHY700 Hydraulic Pressure Welding Machine
Copper 7.00-13.00 mm and aluminium 7.00-25.00 mm at 8.0 MPa on a 1780 kg frame.
Product Overview
CHY700 Hydraulic Pressure Welding Machine
The CHY700 is the heavy single-frame machine in the range. It welds copper wire from 7.00 mm to 13.00 mm and aluminium from 7.00 mm to 25.00 mm at 8.0 MPa working pressure, driven by a 7.5 kW motor, in a 1350 × 780 × 1000 mm footprint at 1780 kg.
Specifications
- Hydraulic pressure welding machine ModelCHY700
- Copper wire7.00mm-13.00mm
- Aluminium wire7.00mm-25.00mm
- DimensionL1350mm*W780mm*H1000mm
- Net weight1780kgs
- Motor power7.5KW
- Working pressure8.0MPa
- Operating voltageaccording to the customer's industrial voltage in your country.
- Packagepacked in strong wooden case.
Key Benefits
What This Model Gives You
25.00 mm Aluminium in One Frame
The full aluminium rod range without splitting the machine into press and power pack.
8.0 MPa Fixed Working Pressure
Set high for the section, which is what makes a 25 mm aluminium upset possible.
1780 kg
The heaviest single-block machine SGT builds, and the reason die alignment holds at these sections.
Built to Your Supply
Operating voltage follows the industrial supply in the destination country.
Application Scenarios
Where It Is Used
- Aluminium rod breakdown to 25 mm
- Large copper conductor
- ACSR and overhead conductor
- Continuous casting and rolling lines
Industries
Problems It Solves
Why Buyers Specify It
- 25 mm aluminium is beyond every lighter frame in the range
- A joint at this section fails at the interface if the frame flexes
- Shipping a two-part machine complicates a simple installation
Compared With Other Models
The CHY700-B is the 1500 kg build with a 5.5-8.0 MPa band, copper to 12.00 mm and aluminium to 20.00 mm. The CHY700 is the heavier 1780 kg machine at a fixed 8.0 MPa, copper to 13.00 mm and aluminium to 25.00 mm. The CHY800 goes further on copper rod but arrives as two units.
Use Guide
How It Is Set Up and Run
- Fit CHY700 dies cut for the section.
- Confirm the working pressure is set to 8.0 MPa.
- Load both rod ends so the faces meet inside the die.
- Cycle, shear the flash, and pull-test before returning the line to production.
Customisation and Supply
What Is Built to Order
Dies to Your Wire
Dies are manufactured for wire between 0.10 mm and 25.0 mm to suit round or profile wire and rod, to the customer's own specification, at -1% / +2% of the wire diameter.
Your Electrical Supply
On the motorised and hydraulic machines, operating voltage is built to the industrial supply of the destination country. State voltage, phase and frequency with the order.
Export Packing
Machines are packed in a strong wooden or plywood case as stated per model. Carry cases are supplied with the portable welders and the DA10.
Related Articles
Background Reading
Related Products
Others in Hydraulic Pressure Welders
Hydraulic Pressure Welders
CHY200-B Hydraulic Pressure Welding Machine
Copper 2.00-6.00 mm and aluminium 2.00-8.00 mm on a 380 kg frame with a 1.5 kW motor.
View specifications
Hydraulic Pressure Welders
CHY400-B Hydraulic Pressure Welding Machine
Copper 4.00-9.00 mm and aluminium 4.00-12.00 mm, supplied 3P 380 V 50 Hz on a 760 kg frame.
View specificationsFAQ
CHY700 Hydraulic Pressure Welding Machine Questions
What is the largest aluminium section
25.00 mm aluminium wire or rod.
What motor is fitted
7.5 kW, at 8.0 MPa working pressure.
What voltage is it built for
According to the customer's industrial voltage in their country.
How is it packed
In a strong wooden case. Net weight is 1780 kg.
Quote the CHY700 Hydraulic Pressure Welding Machine
Give the wire material, the diameter and the country the machine will run in, and the quote comes back with the die set and the voltage build already decided.