Every Tianhe model, on one page

Motor Roller

A motor roller puts the gearmotor inside the roller tube, so a conveyor zone drives itself with no external motor, chain or guard. Tianhe supplies AC, DC brushless and direct-drive families in 50, 57, 60 and 76 mm diameters, with galvanized, chrome, PU, NR-coated and stainless tubes, and with sprocket, poly-V, V-pulley, timing pulley and O-groove drive ends for slaving idle rollers.

DGBL Motor Roller (13 models)

DGAC Motor Roller (28 models)

DGDD Motor Roller (3 models)

Belt Conveyor Motor Roller (5 models)

Roller & Conveyor

Beyond components, Tianhe supplies the conveyor sections themselves: gravity and powered roller conveyors, belt conveyors and slat conveyors, built around the same rollers, bearings and motor rollers we manufacture.

Roller (29 models)

Roller Conveyor (13 models)

Belt Conveyor (11 models)

Gravity Roller Bearings

The bearing end cap is what decides whether a gravity roller spins freely for years or drags after one winter. This range covers plastic and metal housings that press into the roller tube and carry the bearing on a spring, hex or threaded shaft.

Plastic Roller Bearings (7 models)

Plastic Roller Bearings KTR (6 models)

Metal Roller Bearings MTR (7 models)

Roller bearings with Hex Shaft (4 models)

Drive Roller Plastic Bearings

End caps that do more than carry the roller — they transmit drive. Sprocket, poly-V and O-belt profiles are moulded into or fitted onto the housing so one powered roller can drive the next without a separate drive shaft.

Single Sprocket Roller Bearings (6 models)

Double Sprocket Roller Bearings (2 models)

Poly V Roller Bearings (4 models)

O Belt Roller Bearings (2 models)

Ball Transfer Unit

A ball transfer unit turns a fixed work surface into an omni-directional one: a large load ball rides on a bed of smaller support balls inside a housing, so an operator can push, spin and align a package in any direction without lifting it. Tianhe builds the full range in one factory — pressed steel, machined steel, stainless and nylon bodies, flange mount, press mount, bolt-down and stud mount, from light fixture balls up to heavy machined units for die and mould handling.

CY Series (25 models)

SP Series (15 models)

D Series (20 models)

NL Series (15 models)

IA IS Series (10 models)

KS KSM Series (24 models)

SI SD Series (10 models)

IK UK Series (20 models)

NJ LW FB Series (40 models)

Roller Wheel & Roller Track

Roller track — sometimes called skate wheel rail or flow rail — is a formed rail carrying a row of small wheels, used to build gravity flow lanes, pick faces and carton flow racks without the cost of full-width roller conveyor.

Plastic Roller Wheel (16 models)

Plastic Roller Track (12 models)

Metal Roller Track (21 models)

Metal Roller Wheel (17 models)

Other Accessories

Supporting parts for roller and motor roller lines — poly-V drive belts such as the 3PJ336, O-belts, sprockets, end caps and the small drive components that connect one roller to the next.

Other Accessories (5 models)