Stud Mound Fine Machined Ball Transfer Unit D-5HR
Stud Mound Fine Machined Ball Transfer Unit D-5HR is a D Series Ball Transfer Units item manufactured and shipped directly from Wuxi, China. It is ordered under model number D-5HR. The published load capacity is 16kgs, with a maximum of 20kgs. The load ball is nylon, steel, stainless steel and the case is available in steel, stainless steel.
Manufactured by Tianhe Conveying Machine Co., Ltd, Wuxi, Jiangsu, China. Specification confirmed on drawing before production.
Published data for this model
| Model No. | D-5HR |
|---|---|
| Ball Material | nylon, steel, stainless steel |
| Case Material | steel, stainless steel |
| Load Capacity | 16kgs |
| Max Load Capacity | 20kgs |
| Weight | 65g |
| Ball Diameter | 15.875mm |
| Material | Carbon Steel, Nylon |
Figures above are taken from the manufacturer's published data for this model. Values not listed are confirmed on drawing rather than estimated.
Where it is used
Bolt-down units are used when vibration or lateral force would work a pressed unit loose — typically on moving machinery, tilting tables or anything a forklift reaches into.
- Tilting and lift tables where the unit must not migrate
- Transfer decks on mobile and vibrating equipment
- Heavy pallet and container handling plates
- Structural ball beds built into welded frames
How to specify it
Check the plate thickness and the thread reach before selecting a stud length; a stud that bottoms out will hold the housing off the plate and destroy the load rating.
Ordering
Send the model number D-5HR with the quantity and destination country to [email protected]. We reply with price, lead time and a drawing to confirm before production.
Other D Series models
Flange Mount Fine Machined Ball Transfer Unit D-24H
Load Capacity: 600kgs
Flange Mount Fine Machined Ball Transfer Unit D-16H
Load Capacity: 300kgs
Flange Mount Fine Machined Ball Transfer Unit D-12HR
Load Capacity: 300kgs
Stud Mount Fine Machined Ball Transfer Unit D-12HAR
Load Capacity: 250kgs
Stud Mount Fine Machined Ball Transfer Unit D-12HA
Load Capacity: 250kgs
Flange Mount Fine Machined Ball Transfer Unit D-12H
Load Capacity: 300kgsFrequently Asked Questions
What load can D-5HR carry?
The load capacity published for this model is 16kgs, with a maximum of 20kgs. Divide the package weight by the number of units actually in contact and apply an impact coefficient before deciding how many you need.
Which case materials are available for D-5HR?
This model is listed with steel, stainless steel. Match the finish to the environment rather than the load: plating for dry indoor use, stainless for wash-down.
How do I order D-5HR?
Send the model number D-5HR and the quantity to [email protected], or message us on the contact page. We reply with price, lead time and the drawing for confirmation.
Quote D-5HR
Email the model and quantity; we reply with price, lead time and drawing.