Nylon Roller Wheel Th-06
Tianhe lists Nylon Roller Wheel Th-06 in the Plastic Roller Wheels group of the material handling range. It is ordered under model number TH-06. The published load capacity is 10kgs. Material: Carbon Steel, rubber Tianhe Conveying Machine Co.
Manufactured by Tianhe Conveying Machine Co., Ltd, Wuxi, Jiangsu, China. Specification confirmed on drawing before production.
Published data for this model
| Model No. | TH-06 |
|---|---|
| Case Material | Nylon 6 2)Diameter:47 |
| Load Capacity | 10kgs |
| Weight | 16g |
| Material | Carbon Steel, rubber Tianhe Conveying Machine Co |
| Shaft | M8mm |
Figures above are taken from the manufacturer's published data for this model. Values not listed are confirmed on drawing rather than estimated.
Where it is used
Steel wheels on a long pick face are loud and will eventually score the base of coated cartons; plastic wheels remove both complaints at typical pick-face loads.
- Carton flow rack lanes
- Light skate wheel conveyor
- Pick faces in noise-sensitive areas
- Printed and coated carton handling
How to specify it
Check the wheel outside diameter, bore and hub width against your rail, and confirm the load per wheel — flow lanes spread the load over many wheels, which is why plastic works there.
Ordering
Send the model number TH-06 with the quantity and destination country to [email protected]. We reply with price, lead time and a drawing to confirm before production.
Other Plastic Roller Wheel models
Plastic Roller Wheel with Metal Bearing GA-01-04
Material: Carbon Steel, rubber Tianhe Conveying…
HIPS Roller Wheel W-38G
Material: Carbon Steel, rubber
ABS Roller Wheel W-28G
Material: Carbon Steel, rubber
Plastic Roller Wheel W-13G
Material: Carbon Steel, rubber
Plastic Conveyor Wheel W-4555NPS
Material: Carbon Steel, rubber
Pe Track Roller W-3825NPS
Material: Carbon Steel, rubberApplications and selection guidance
Gravity Flow Lanes and Pick Faces
Building a carton flow lane from rail, wheels and roller bearings that keeps moving for years.
Design GuideDesigning a Carton Flow Lane With Roller Track
Roller track gives you a flow lane for a fraction of the weight and cost of full-width roller conveyor, provided wheel pitch, material and slope are set against the actual carton.
Frequently Asked Questions
What load can TH-06 carry?
The load capacity published for this model is 10kgs. Divide the package weight by the number of units actually in contact and apply an impact coefficient before deciding how many you need.
Which case materials are available for TH-06?
This model is listed with Nylon 6 2)Diameter:47. Match the finish to the environment rather than the load: plating for dry indoor use, stainless for wash-down.
How do I order TH-06?
Send the model number TH-06 and the quantity to [email protected], or message us on the contact page. We reply with price, lead time and the drawing for confirmation.
Quote TH-06
Email the model and quantity; we reply with price, lead time and drawing.