Flange Mount Ball Transfer Unit CY-25E
Within the CY Series Ball Transfer Units range, Flange Mount Ball Transfer Unit CY-25E covers the duty described below. It is ordered under model number CY-125E. The published load capacity is 30kgs, with a maximum of 35kgs. The load ball is Steel, Stainless Steel, Nylon and the case is available in Steel & Galvanized, Steel & Chrome plating, Stainless Steel.
Manufactured by Tianhe Conveying Machine Co., Ltd, Wuxi, Jiangsu, China. Specification confirmed on drawing before production.
Published data for this model
| Model No. | CY-125E |
|---|---|
| Ball Material | Steel, Stainless Steel, Nylon |
| Case Material | Steel & Galvanized, Steel & Chrome plating, Stainless Steel |
| Load Capacity | 30kgs |
| Max Load Capacity | 35kgs |
| Weight | 150g |
| Ball Diameter | 25mm |
| Material | Carbon Steel, Nylon |
Figures above are taken from the manufacturer's published data for this model. Values not listed are confirmed on drawing rather than estimated.
Where it is used
Pressed units are often bought on price and then fail early because the plate was too thin for the mount style, or because the unit sat under a wash-down hose it was never plated for.
- Ball tables under cartons and plastic totes at packing stations
- Transfer sections between gravity roller conveyors
- Airport and parcel handling check-in plates
- Assembly benches where parts are indexed by hand
How to specify it
Choose flange mount where you can bolt from above and want the ball height fixed by the flange; choose press mount where the plate is punched and a flush finish matters. Chrome plating is the usual upgrade for damp indoor areas; stainless bodies are handled by the KS and SI series.
Ordering
Send the model number CY-125E with the quantity and destination country to [email protected]. We reply with price, lead time and a drawing to confirm before production.
Other CY Series models
Flange Mount Ball Transfer Unit CY-25A
Load Capacity: 25kgs
Disk Mount Pressed Ball Transfer Unit CY-25B
Load Capacity: 25kgs
Disk Mount Ball Transfer Unit CY-38B
Load Capacity: 45kgs
Stud Mount Ball Transfer Unit CY-40F
Load Capacity: 40kgs
Flange Mount Ball Transfer Unit CY-38A
Load Capacity: 60kgs
Press Mount Pressed Ball Transfer Unit CY-30H
Load Capacity: 70kgsApplications and selection guidance
Airport and Baggage Handling
Check-in ball transfer plates, belt conveyor drum motors and transfer sections for baggage lines.
SolutionBall Transfer Tables and Transfer Plates
Laying out a ball table so an operator can rotate and align a load with one hand, and so the units survive the way the load arrives.
Selection GuideBall Transfer Unit Mounting Styles Explained
Flange, press, bolt-down, stud and downward mounts are not interchangeable. The plate you have usually decides which one you can use.
Frequently Asked Questions
What load can CY-125E carry?
The load capacity published for this model is 30kgs, with a maximum of 35kgs. Divide the package weight by the number of units actually in contact and apply an impact coefficient before deciding how many you need.
Which case materials are available for CY-125E?
This model is listed with Steel & Galvanized, Steel & Chrome plating, Stainless Steel. Match the finish to the environment rather than the load: plating for dry indoor use, stainless for wash-down.
How do I order CY-125E?
Send the model number CY-125E and the quantity to [email protected], or message us on the contact page. We reply with price, lead time and the drawing for confirmation.
Quote CY-125E
Email the model and quantity; we reply with price, lead time and drawing.