B962S3000A/V Main Shaft Assembly For A European Customer
B962S3000A/V main shaft assembly in Alloy steel, supplied to a european crusher operator.
What The Customer Was Dealing With
A main shaft is not a consumable, which is why nobody stocks one — and why a shaft failure takes a crusher out of service for as long as it takes to source a replacement.
Customer Pain Points
- A structural part with no realistic aftermarket source
- Assemblies offered as loose components that still need fitting
- No inspection documentation on a load-bearing item
What We Did About It
We manufactured and supplied the complete main shaft assembly under part number B962S3000A/V, machined in house on our vertical lathes and gantry mills and supplied as an assembly rather than as separate components.
How The Order Ran Through The Works
Geometry established from the customer's part number and drawing
Cast in alloy steel and heat treated under controlled cycle
Machined in house on vertical lathe and gantry milling machines
Dimensional inspection carried out on the assembly
Packed for export on a steel pallet
What Was Delivered
The complete B962S3000A/V main shaft assembly was supplied to the customer in Europe.
Customer Benefit
Sourcing the assembly rather than the components means the fitting work is done here, under our inspection, rather than on the customer's workshop floor.
Quality Control
Chemical analysis was carried out on the heat and the sample retained for at least three years. A dimensional inspection report was issued after machining and before packing.
The Parts Behind This Case
Main Shaft Assembly
Complete main shaft assemblies supplied to European customers
View Part →
Shaft Sleeves And Bushings
Bearing surfaces machined to the fit the crusher was designed around
View Part →
Spider Cap And Spider Arm Shield
Shields the spider bearing and arms from the feed passing over them
View Part →About This Case
Can you name the customer?
No. We describe the customer by region and by sector — in this case a european crusher operator — because customer names are commercially confidential. The part numbers and materials are real.
Can you repeat this part for us?
Yes. The pattern for B962S3000A/V main shaft assembly is held, so a repeat order goes straight into moulding with no pattern cost and no pattern lead time.
What documentation came with this order?
Chemical analysis and a dimensional inspection report, as on every order. Additional testing is carried out in our own laboratory when specified at order stage.
Do you supply parts to this region regularly?
Yes. Europe is a regular destination for us, and around 60% of our output is exported, directly by us or through other companies here in China.
Have A Similar Part To Source
Send the part number or a photograph with the main dimensions. We will check the pattern inventory and tell you what the lead time really is.